• BMB Reports
• /
• 제41권5호
• /
• pp.388-393
• /
• 2008

The Pphsc70 (heat shock cognate 70) gene was isolated from the endoparasitoid Pteromalus puparum and then characterized. The full-length cDNA was 2204 base pair (bp) and contained a single 1968 bp ORF that encoded a polypeptide of 656 amino acids with a predicted molecular mass of 71.28 kDa. Phylogenetic analysis based on Hsc70 amino acid sequences from fifteen insect species agreed with the present phylogeny. In addition, genomic DNA confirmed the presence of three introns located at the coding region as well as the 5'UTR. A significant elevation of Pphsc70 expression was observed following heat treatment, however, continued exposure to heat shock or recovery caused the expression of induced mRNA to gradually decline to levels that were significantly lower than those of control pupae (P < 0.05). In addition, a significant increase was observed in the emergence rate of pupae that were preheated at $40^{\circ}C$ and then exposed to $50^{\circ}C$ for 1 h when compared with the pupae that were not preheated, but instead directly exposed to $50^{\circ}C$. Taken together, these results revealed that exposure to gradually increasing temperatures can enhance an insects thermo-tolerance.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.3-9
• /
• 1999

The grain morphology, the changes in morphology and Jc with the thermo-mechanical treatment (TMT) history, the field dependence of Jc and the nature of intergranular bonding were studied in $T_{10.8}$$Pb_{.2}$$Bi_{0.2}$$Sr_{1.8}$$Ba_{0.2}$$Ca_{2.2}$$Cu_{3}$$O_{z}$/Ag tapes. As a result, incorporation of intermediate rolling during the final heat-treatment resulted in of plate-like TI-1223 grains, and thus enhanced Jc. Jc's near 2.5$\times$104 A/cm2 at 77 K and 0 T were obtained in just rolled tapes with an excellent reproducibility. The high Jc's seem to grain-connectivity easy recovery of excellent grain-connectivity during final heat-treatment after inter -mediate rolling, probably due to retarded T1 evaporation and excessive Ca content in the present composition. The strong field dependence of Jc even in low fields, however, indicated that there still existed significant weak-links and the degree of directional grain-alignment was far from the desired one. The intergranular binding in the tapes seemed to be mainly dominated by SIS junctions.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.67-76
• /
• 1998

Friction materials for brake linings and clutches have severe performance requirements. The principal function of such frictional elements is to convert kinetic energy to heat, and then either to absorb or to dissipate heat. In order to achieve these objectives, the coefficient of friction must be as high as possible, independent of variations in operating conditions, and the necessary energy conversion must be accomplished with a minimum of wear on the contacting parts. In this study, Al powder, Al bronze powder and Mo powder used in general for automobile brake was sprayed on automobile brake disc to restrain rust and to maintain friction performance. Dynamo and corrosion tests have been carried out. It is concluded that the sprayed disc with Al bronze powder has the most improved frictional performance and anti-corrosive characteristics. The main results obtained can be summarized as follows; 1. From the corrosion current density test for gray cast iron and sprayed disc with powders of Al, Al bronze and Mo, it was cleared that the spray treatment with Al bronze powder showed the most superior anti-corrosive characteristics than other powders. 2. By anode polarization toward the noble direction from corrosion potential, corrosion current density with sprayed brake disc by Al-bronze powder was the lowest. 3. Mean frictional coefficients obtained from dynamo test are as follows : the sprayed disc with Al(99.99%) powder was 0.190 ; the sprayed disc with Al-bronze powder was 0.312 ; the sprayed disc with Mo powder was 0.257 ; the non-sprayed disc of gray cast iron was 0.331. In the case of the sprayed disc Al-bronze powder showed the most excellent frictional characteristics . 4. Amount of burnish quantity obtained from burnish test by dynamometer is as follows : the sprayed disc with Al-powder was 1.079 mm : the sprayed disc with Al-bronze powder was 0.155 mm : the sprayed disc with Mo powder was 0.253 mm : the non-sprayed disc of gray cast iron was 0.241 mm. Al-bronze powder also showed the most excellent burnish characteristics.

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.240-249
• /
• 2009

HRSG(Heat Recovery Steam Generator) building is large enclosed structure included various heat sources. This building needs to appropriately keep internal air temperature for worker's safety and operability of control devices. In this study, ventilation analysis is performed to find proper ventilation method for temperature control. Ventilation analysis is applied to entire internal space of the building with standard $k-{\varepsilon}$ model and enhanced wall treatment because of large size of the structure. And the ventilation method is considered natural and forced convection with two louver structures which has damper or not. Louver structure affect directly air circulation in near HRSG and lower region of the building. Forced ventilation provides strong inertial force which cause upward airflow. From the analysis, it is found that design requirement for internal air temperature can be satisfied by forced ventilation method with louver structure without damper.

• 대한화학회지
• /
• 제62권6호
• /
• pp.433-440
• /
• 2018

일반적으로 열분해가 폐인조대리석을 재활용하기 위해 적용되어 왔다. 그러나 기존의 열처리 장치는 폐인조대리석 내부로의 비교적 낮은 열전달 효율을 갖는다. 첨가하여 이 장치는 폴리메틸 메타크릴레이트(polymethyl methacrylate; PMMA)의 부분적 탄화 과정에서 불필요한 가스를 과도하게 생성하고 극히 고온에서의 가열로 인해 인화 위험성이 높다. 본 연구는 위의 문제점을 극복 하고자 폐인조대리석에 전분 용액을 첨가한 후 성형 상태에서의 열처리 공정을 제시한다. 실험 결과, 이 방법은 폐인조대리석의 열분해가 비교적 $350^{\circ}C$의 낮은 온도에서도 상당히 향상 되었음을 보였다. 이외에도 메틸메타 크릴레이트(methyl methacrylate; MMA) 및 ${\alpha}$-알루미나(${\alpha}-Al_2O_3$) 회수에 필요한 안전성 확보 및 에너지를 절감하는 효과를 보였다.

• 자원리싸이클링
• /
• 제31권2호
• /
• pp.33-39
• /
• 2022

본 연구에서는 Rotary kiln(RK)을 이용하여 바나듐 염배소 전처리시 적정온도를 유지하기 위한 열화학적 모델링 관련 인자에 대해 논의하였다. 관련 모델 메카니즘은 열화학 관련 반응속도모델, 열수지 및 열전달 등이며 이를 통해 rotary kiln내 온도분포를 직관적으로 추정할 수 있다. 이러한 작업을 통해 최적 염배소 온도인 1000 ℃(또는 약 1273 K) 근방을 kiln내에서 장기간 유지하는 것이 관건이다. 본 연구에서는 탄화수소(천연가스) 연료연소 및 광석 산화반응으로부터의 발열과 광석으로의 복사열전달 등을 산정하였다. 또한 열화학 측면에서 Rotary kiln내 적정 배소온도구역에서의 온도구배 완화를 위한 방안을 제시하였다.

• 한국주조공학회지
• /
• 제37권1호
• /
• pp.1-13
• /
• 2017

The purpose of this study is to increase the part recovery rate (to more than 70%) during the casting of a ductile cast iron turbo charger housing using a heater around the riser. Before creating a casting mold, various runner and riser systems were designed and analyzed with a casting simulation analysis tool. The design variables were the heater temperature, top insulation, riser location, riser diameter and the riser shape. During the feeding from the riser to the part, the reverse model was better than the forward model. When heating the riser (above $600^{\circ}C$), solidification of the riser was delayed and the feeding effect was suitable compared to that without heating. At a higher heating temperature, less solidification shrinkage and porosity were noted inside the part. On the basis of a casting simulation, eight molds were fabricated and casting experiments were conducted. According to the experimental conditions, external and internal defects were analyzed and mechanical properties were tested. The ultimate tensile strength and elongation outcome were correspondingly more than 540MPa and 5% after a heat treatment. In addition, a maximum part recovery rate of 86% was achieved in this study.

• 공업화학
• /
• 제25권4호
• /
• pp.414-417
• /
• 2014

습식제련 기술을 통한 Ga의 재활용을 위해 고결정성 GaN으로 구성되어 있는 LED 공정스크랩의 침출 거동을 연구하였다. 고결정성 GaN은 산성 및 염기성 조건에서 매우 안정하여 침출이 어려운 물질로 알려져 있다. 따라서, 본 연구에서는 볼밀링을 통해 원료와 $Na_2CO_3$를 1:1 비율로 섞은 후 관상로를 이용해 $1000-1200^{\circ}C$에서 열처리 하여 산화물로의 상변화를 유도하였다. 열처리 결과로써, $1100^{\circ}C$에서 GaN은 약 73 wt%의 Ga을 포함하는 산화물로 상변화 되었다. 이러한 열처리 샘플은 $100^{\circ}C$ 4 M HCl에서 96%의 높은 침출률을 나타냈다.

• 공업화학
• /
• 제23권2호
• /
• pp.195-203
• /
• 2012

폐 LCD유리의 재활용 방안은 평판 디스플레이용 폐 LCD판넬의 전체 재활용 공정의 확립을 위한 중심요건이다. 본 연구는 폐 LCD유리를 보온단열재, 흡음차음제, 토목용 경량골재 또는 수처리용 담체 등의 원료로 재활용하기 위한 발포공정의 기초공정으로서 폐 LCD유리의 분쇄특성, 적절한 탄소발포제의 선정, 유가물 회수를 위한 산침출 후 잔유된 유리질의 물성 및 이들의 발포화의 문제점을 조사하였다. 폐 LCD유리의 분쇄공정을 통해 발포용 원료로 사용가능한 미분화가 가능하였으며, 고융점을 갖는 LCD 유리의 발포화를 위해서는 결정성 천연흑연이 적절하였으며, 산 침출 후 잔사인 슬러지 상태의 폐유리성분도 발포체의 원료로 재활용될 수 있음을 확인하였다.

• 한국해양공학회지
• /
• 제8권1호
• /
• pp.154-164
• /
• 1994

In this paper, fatigue testing was carried out under the change of aging time(0.5,1.5.10hrs) by electric heating method which is one of the useful method in the application of Robot's actuator. Fatigue degradation behaviors such as cyclic deformation property, amount of deformation, decrease in recovery and variation of transformation temperature for each specimen were examined closely, and the effect of aging time condition was studied on their fatigue degradation behaviors.