• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.179-183
• /
• 2007

This paper is to implement a low power frequency Shift Keying(FSK) receiver using Xilinx System Generator. The receiver incorporates a 16 point Fast Fourier Transform(FFT) for symbol detection. The design units of the receiver are digital designs for better efficiency and reliability. The receiver functions on one bit data processing and supports data rates 10kbps. In addition CORDIC algorithm is used for avoiding complex multiplications while computing FFT, multiplication of twiddle factor is substituted by rotators. The design and simulation of the receiver is carried out in Simulink, then the simulink model is translated to a hardware model to implement FPGA using Xilinx System Generator and to verify performance.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.145-152
• /
• 2010

In this paper, we developed a local oscillator (LO) system of millimeter wave band receiver for radio astronomy observation. We measured the phase and amplitude drift stability of this LO system. The voltage control oscillator (VCO) of this LO system use the 3 mm band Gunn oscillator. We developed the digital phase locked loop (DPLL) module for the LO PLL function that can be computer-controlled. To verify the performance, we measured the output frequency/power and the phase/amplitude drift stability of the developed module and the commercial PLL module, respectively. We show the good performance of the LO system based on the developed PLL module from the measured data analysis. The test results and discussion will be useful tutorial reference to design the LO system for very long baseline interferometry (VLBI) receiver and single dish radio astronomy receiver at the 3 mm frequency band.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.107-112
• /
• 2009

This paper describes design and fabrication issues of the SiP(System in Package) one-chip for a portable digital broadcasting receiver. It includes RF tuner chip, demodulator chip and passive components for the receiver system. When we apply the SiP one-chip technology to the broadcasting receiver, the system board size can be reduced from $776mm^2$ to $144mm^2$. SiP one-chip has an advantage that the area reduces more 81% than separated chips. Also the sensitivity performance advances -1dBm about 36 channels in the RF weak electric field, the power consumption reduces about 2mW and the C/N keeps on the same level.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.23-32
• /
• 2015

The advanced receiver which can manage inter-cell interference is required to cope with the explosively increasing mobile data traffic. 3rd Generation Partnership Project (3GPP) has discussed network assisted interference cancellation and suppression (NAICS) to improve signal-to-noise-plus-interference ratio (SINR) and receiver performance by suppression or cancellation of interference signal from inter-cells. In this paper, we propose the novel hybrid receiver Full Suppression Cancellation (FSC) to reduce the interference from neighbor cell in backhaul system. The proposed receiver can suppress and cancel the interference by combining Interference Rejection Combining (IRC) with Successive Interference Cancellation (SIC). We perform the system level simulation based on 20MHz bandwidth of 3GPP LTE-Advanced system. Simulation results show that the proposed receiver can improve error rate and throughput of conventional system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1488-1494
• /
• 2008

This paper is to design and implement a low power noncoherent BFSK receiver intended for future deep space communication using Xilinx System generator. The receiver incorporates a 16 point Fast Fourier Transform(FFT) for symbol detection. The design units of the receiver are digital design for better efficiency and reliability. The receiver functions on one bit data processing and supports main data rate 10kbps. In addition CORDIC algorithm is used for avoiding complex multiplications while computing FFT and multiplication of twiddle factor for low power is substituted by rotators. The design and simulation of the receiver is carried out in Simulink then the Simulink model is translated to the hardware model to implement FPGA using Xilinx System Generator and to verify performance.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.161-164
• /
• 2008

For the development of solar thermal power tower plant from the early 80' to today, various kinds of receiver have been tested and evaluated. Most of 1st generation receiver used water/steam as a working fluid to operate steam turbine and now the first commercial solar power tower PS-10 also makes saturated steam. However, to increase thermal efficiency of storage system and to obtain practical use of solar energy, molten salt system have been used from THEMIS project in France at 1984. The Solar Tres plant of 17 MWe power generation will be constructed in Spain and have plan to operate 24 hours in summer. The air volumetric receiver system can be integrated with combined cycle of gas turbine and HRSG and also with steam turbine easily. Therefore, related researches to develop higher efficient solar power tower plant and to operate with stable are widely performed in the world.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.394-397
• /
• 2001

There are several methods of measuring position. For example GPS, AOA, TDOA and using radio camera. In this Paper I used TDOA method in position measuring system. TDOA method uses arrival time difference. In position measuring system, three transfers which is placed in different position transfer signal to receiver in fixed time interval and receiver records arrival time of signal. Because receiver knows idle signal's arrival time, receiver can calculate the difference of the signal's arrival time between idle and real. When we obtain time difference we can know the receiver position by Newton Raphson method.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.1
• /
• pp.117-123
• /
• 2012

This paper implements mobile Worldwide Interoperability for Microwave Access (WiMAX) receiver using Software Defined Radio (SDR) technology. SDR system is difficult to implement on the mobile handset because of restrictions that are computing power and under space constraints. The implemented receiver processes mobile WiMAX software modem on Open Multimedia Application Platform (OMAP) System on Chip (SoC) and Field Programmable Gate Array (FPGA). OMAP SoC is composed of ARM processor and Digital Signal Processor (DSP). ARM processor supports Single Instruction Multiple Data (SIMD) instruction which could operate on a vector of data with a single instruction and DSP is powerful image and video accelerators. For this reason, we suggest the possibility of SDR technology in the mobile handset. In order to verify the performance of the mobile WiMAX receiver, we measure the software modem runtime respectively. The experimental results show that the proposed receiver is able to do real-time signal processing.

• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.32-42
• /
• 2004

In this paper we apply space-time block code with multiple transmitter/receiver antennas to the Advanced Television Systems Committee (ATSC) terrestrial broadcasting systems. Especially, we apply Aiamouti scheme with two transmitter antennas and multiple receiver antennas to the ATSC broadcasting system. Also. diversity technique with multiple receiver antennas and space-time block code scheme with multiple transmitter/receiver antennas are compared. Our simulation results show that the ATSC broadcasting system with multiple transmitter/receiver antennas has an extremely good performance than the scheme with single transmitter/receiver antenna in the Rayleigh fading channel.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.975-981
• /
• 2012

In this paper, we considered the received signal of the wideband CDMA systems using turbo code in the multipath channel environments, and analyze the performance of the system. This study is to analyze the performance for the variable system bandwidth according to the number of branches of rake receiver by passing the received signal through a rake receiver with a turbo code in Rayleigh fading channel environments. For the design of receiver in wideband CDMA systems, we presented the efficient parameters for the number of iterative decoding and the number of branches of rake receiver.