• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.77-84
• /
• 2000

In this paper, we modelized the multipath fading to Nakagami-m distribution fading channel which can be applied to the extended mobile communication channel environment. We assumed that the phase difference with reference signal happened in the received signal and in the receiver PLL(Phase Locked Loop) is the phase error. To correct the error we propose new RAKE receiver using PLL. In addition, we analyze the performance of DS/SS(Direct Sequence/spread Spectrum) system according to the gain of PLL,$\gamma_n$, the number of RAKE receiver branch L and MIP(Multipath Intensity Profile)'s exponential decay $\delta$. As a result, when the proposed RAKE receiver L Is increased and the $\delta$ is decreased the performance of the system gets better. Futhermore when PLL gain was 30dB, phase is identified. That is when the PLL gain is 30dB, the performance equals with the perfect coherent system's. Therefore, we can correct the phase error by using the proposed RAKE receiver and we proved that the PLL's requested limit gain should be 30dB.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.1-7
• /
• 2004

The development of direct receiver techniques is expected to be a solution for future wideband or multi-band wireless systems based on software defined radio. In this Paper, we study the regeneration of I and Q signals for the SDR based direct conversion receiver, so that we can handle a wide bandwidth and maintain maximal flexibility in system utilization. After modeling the basic system considering the real wireless communication environment, and studying the impact of imperfect phase imbalance on the performance of a direct conversion receiver, we propose a suboptimal I and Q signal regeneration algorithm for the system. The proposed algerian regenerates I and Q signals using a real time early-late compensator which effectively estimates phase imbalances and gives feedback in a directreceiver. The proposed algorithm is shown to mitigate the impact of AWGN and improves performance especially at low SNR channel condition. According to the computer simulation, the BER performance of the proposed system is at least about 4 dB better than conventional systems under $45{\~}55$ degrees random phase errors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.308-315
• /
• 2002

This paper proposes new probability models for wideband code division multiple access (W-CDMA) signals. The performance of a W-CDMA system is evaluated by calculating the average bit error rate(BER) which is derived from the probability distribution of the W-CDMA receiver output. If a probability model of the receiver output is available, the performance evaluation becomes much simpler and it enables diverse analyses of the system for channel coding and other purposes. In this paper, probability distributions of W-CDMA signals, more specifically those of the receiver output, are represented as Rayleigh and noncentral chi distribution, considering various bandwidths and channel environments. The adequacy of a probability model is verified by chi-square test of 1% significance level. The BER of the system obtained from the simulation results is compared to that obtained from the probability model to demonstrate the usefulness of the proposed models.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.591-594
• /
• 2001

In the W-CDMA system, cell search is one of the imporant functions of the mobile station searching for a cell and achieving spreading code and time synchronization to its downlink scrembling code. For the methods of cell search to optimize codes, three stages are considered: 1) slot synchronization, 2) frame synchronization, and 3) scrambling code identification. Channels for cell search are Primary Synchronization Channel (P-SCH), Secondary Synchronization Channel(S-SCH), and Common Pilot Channel (CPICH). In this paper, cell search is analyzed based on simulation. Rake receiver provides improvement of Performance as an increase of bandwidth because there are more available multipaths. In this paper, the performance of W-CDMA system employing RAKE receiver is evaluated by computer simulation over the types of ITU_R wideband channel model and spreading rate. The result shows that the performance of CDMA adapting RAKE receiver is improved by the increase of multipath components in equal level of the received power.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1354-1357
• /
• 2002

In this paper, we propose a suboptimal receiver combining adaptive array antenna and orthogonal decision-feedback detector in DS/CDMA system. Adaptive array antenna can cancel out undesired signal using beamforming scheme. However, if there are interfering signals from undesired users with the same incident angle as that of a desired user, an adaptive array antenna cannot suppress them. The proposed receiver can cancel out remaining interference from users having nearly the same beam pattern. And we employ Orthogonal Decision-Feedback Detector (ODFD) as multiuser detection. The ODFD performs as good as the decorrelating decision -feedback detector (DDD) with much less complexity. Simulation results show that the proposed system provides a significantly enhanced performance.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.208-211
• /
• 2008

Band-limited filtering will be applied to remove interference resulted from two neighbored channels in the transmission of KOMPSAT-5 X-Band image data. In that case, receiver in ground station should prepare righteous matched filter to avoid huge BER degradation depending on the matched filter of COTS receiver. As an effort to simulate the bandlimited filtering, test filter was designed and manufactured on the basis of main specification for output filter of KOMPSAT-5 satellite. Consequently, 1.8dB of BER degradation was measured at the output of test band-pass filter, but the degradation was downsized up to 0.4dB thanks to the adaptive matched filter of COTS receiver.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.77-86
• /
• 2006

Usually, a tracking-gate of the tracker is used to track the target radar signal in the active ECM system. In this paper, we propose the feed-back tracking-gate filtering method. The designed method applies a tracking-gate of the tacker to the ECM system's receiver as a rejection or pass filter selected by the receiver's purpose, and the specific target signals can be passed or rejected though this tracking-gate filter. Thus, the number of input signals within the receiver's search band is minimized owing to this filter except the target signals. In conclusion, the EW equipment's reaction time can be reduced and the error value about the target signals can be lower than the previous methods'.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.423-429
• /
• 2008

This study was performed to investigate the effects of inertial navigation system (INS) / global positioning system (GPS) sensor fusion for agricultural vehicle navigation. An extended Kalman filter algorithm was adopted for INS/GPS sensor fusion in an integrated mode, and the vehicle dynamic model was used instead of the navigation state error model. The INS/GPS system was consisted of a low-cost gyroscope, an odometer and a GPS receiver, and its performance was tested through computer simulations. When measurement noises of GPS receiver were 10, 1.0, 0.5, and 0.2 m ($1{\sigma}$), RMS position and heading errors of INS/GPS system at 5 m/s straight path were remarkably reduced with 10%, 35%, 40%, and 60% of those obtained from the GPS receiver, respectively. The decrease of position and heading errors by using INS/GPS rather than stand-alone GPS can provide more stable steering of agricultural equipments. Therefore, the low-cost INS/GPS system using the extended Kalman filter algorithm may enable the self-autonomous navigation to meet required performance like stable steering or more less position errors even in slow-speed operation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1082-1088
• /
• 2003

This study is about the development of a system related to the CATV network. It intends to develop an automatically centralized Headend system and a distributive system to remove the ineffectiveness of the established manual system. To achieve this goal, we took a put of bandwidth, which is not used for the transmission of video signals in the established frequency bandwidth, and used it for the transmission and receiver of controlling signals. By this way we could design a system of transmission and receiver and a automatic distributive system. We developed an information management system for the 9600bps CATV using RS-232 of forward/backward communication and backward communication. Based on window, It consist of ID generation, transmitter/receiver, control and backup part.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.5
• /
• pp.440-451
• /
• 2014

A multi-static SONAR system consists of the transmitters and receivers separately in space. The active target echoes are received along the transmitter-target-receiver path and depend on the shape and aspect angle of the submerged objects at each receiver. Thus, the target echo algorithm used with a mono-static system, in which the transmitter and receiver are located at the same position, has limits in simulating the target echoes for a multi-static SONAR system. In this paper, a target echo modeling procedure for a 3D submerged object in space is described based on the Kirchhoff approximation, and the SONAR system is extended to a multi-static SONAR system. The scattered field from external structures is calculated on the visible surfaces, which is determined based on the locations of the transmitter and receiver. A series of experiments in an acoustic water tank was conducted to measure the target echoes from scaled targets with a single transmitter and 16 receivers. Finally, the numerical results were compared with experimental results and shown to be useful for simulating the target echoes/target strength in a multi-static SONAR system.