• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.110-118
• /
• 2022

Frequent drought damage has resulted in the polarization of water resources. In Korea, local periodic abnormal droughts continued to occur between 2011 and 2017, resulting in decreased water storage rates of small-scale reservoirs designed with a frequency of 10-year droughts. This decrease can degrade water quality and limit the use of already secured quantities. Therefore, to prepare for and overcome drought, quality management and recalculation of drought frequency are required. This study estimates the potential pollutants causing quality changes in the reservoir. In addition, it reviews the decrease in storage and consequent changes in the quality of a reservoir during drought.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.31-43
• /
• 2023

Purpose: In this study, an analysis of the differences between the elastoplastic analysis and the numerical analysis and a study of the design ground constant recalculation method to derive similar trends in the analysis results were conducted. Method: The relational expression between the ground reaction force coefficient and the ground deformation coefficient at the time when the wall displacement becomes the same according to shallow excavation and deep excavation was derived. Result: Based on the measurement results, reverse analysis was performed to re-calculate the ground properties suitable for the site ground, and as a result of comparing and verifying the wall displacement using the derived formula and the literature formula, the proposed formula showed the most similar value. Conclusion: If the proposed formula is used, it will be helpful in practice because it is possible to infer the most similar ground properties to the actual at the time of design.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.9
• /
• pp.33-40
• /
• 2008

This paper describes the performance of ground improvement project using prefabricated vertical drains of condition, in which approximately 10m dredged fill overlies original soft foundation layer in the coastal area composed of soft marine clay with high water content and high compressibility. From field monitoring results, excessive ground settlement compared with predicted settlement in design stage developed during the following one year. In order to predict the final consolidation behavior, recalculation of consolidation settlements and back analysis using observed settlements were conducted. Field monitoring results of surface settlements were evaluated, and then corrected because large shear deformation occurred by construction events in the early stages of consolidation. To predict the consolidation behavior, material functions and in-situ conditions from laboratory consolidation test were re-analyzed. Using these results, height of additional embankment is estimated to satisfy residual settlement limit and maintain an adequate ground elevation. The recalculated time-settlement curve has been compared with field monitoring results after additional surcharge was applied. It might be used for verification of recalculated results.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.835-843
• /
• 2023

Given the structure of XML data, path and tree pattern matching algorithms play an important role in XML query processing. To facilitate decisions or relationships between nodes, nodes in an XML tree are typically labeled in a way that can quickly establish an ancestor-descendant on relationship between two nodes. However, these techniques have the disadvantage of re-labeling existing nodes or recalculating certain values if insertion occurs due to sequential updates. Therefore, in current labeling techniques, the cost of updating labels is very high. In this paper, we propose a new labeling technique called Fast XML encoding, which supports the update of order-sensitive XML documents without re-labeling or recalculation. It also controls the length of the label by reusing deleted labels at the same location in the XML tree. The proposed reuse algorithm can reduce the length of the label when all deleted labels are inserted in the same location. The proposed technique in the experimental results can efficiently handle order-sensitive queries and updates.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.608-616
• /
• 2016

The Smith-Watrman (SW) algorithm is a local alignment algorithm which is one of important operations in DNA sequence analysis. The SW algorithm finds the optimal local alignment with respect to the scoring system being used, but it has a problem to demand long execution time. To solve the problem of SW, some methods to perform SW in distributed and parallel manner have been proposed. The ADAM which is a distributed and parallel processing framework for DNA sequence has parallel SW. However, the parallel SW of the ADAM does not consider that the SW is a dynamic programming method, so the parallel SW of the ADAM has the limit of its performance. In this paper, we propose a method to enhance the parallel SW of ADAM. The proposed parallel SW (PSW) is performed in two phases. In the first phase, the PSW splits a DNA sequence into the number of partitions and assigns them to multiple nodes. Then, the original Smith-Waterman algorithm is performed in parallel at each node. In the second phase, the PSW estimates the portion of data sequence that should be recalculated, and the recalculation is performed on the portions in parallel at each node. In the experiment, we compare the proposed PSW to the parallel SW of the ADAM to show the superiority of the PSW.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.215-224
• /
• 2019

The objective of study was to identify perceived medication administration Competence of senior nursing students. A total of 128 students were recruited. The instruments for this study were self-efficacy for drug dosage calculation, anxiety for drug dosage calculation and perceived medication administration competence. The data were collected from November 2018 to January 2019, analyzed by descriptive analysis, chi-square, t-test, Scheffe test, correlation coefficients, and multiple regression using the SPSS 25.0 program. The main predictors of perceived medication administration competence were identified as confidence in drug dosage calculation (${\beta}=.463$, p<.001), Attitude of participation at clinical practice (${\beta}=.168$, p=.040). These two factors explained about 29% of variance in perceived medication administration competence (F=26.93, p<.001). It can contribute to improve their ability to administrate medication in practice, with the accuracy of prescription, recalculation of prescribed drug dose, and observation of adverse reactions in clinical practice and simulation with collaborative approach.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.1
• /
• pp.45-56
• /
• 2019

In this study, the seismic risk has been evaluated by setting the bedrock acceleration to 0.154g which, was taking into consideration that the earthquake return period for the buried electric power tunnels in the metropolitan area to be 1,000 years. In this case, the risk assessment during the earthquake was carried out in three stages. In the first stage, the site classification was performed based on the site investigation data of the target area. Then, the LPI(Liquefaction Potential Index) was applied using the site amplification factor. After, candidates were selected using a hazard map. In the second stage, risk assessment analysis of seismic response are evaluated thoroughly after the recalculation of the LPI based on the site characteristics from the boring logs around the electric power area that are highly probable to be liquefied in the first stage. The third Stage visited the electric power tunnels that are highly probable of liquefaction in the second stage to compensate for the limitations based on the borehole data. At this time, the risk of liquefaction was finally evaluated based off of the reinforcement method used at the time of construction, the application of seismic design, and the condition of the site.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.313-322
• /
• 2022

The number of architects who adopt BIM(Building Information Modeling) as the design method are gradually increasing because of its productivity and efficiency. Climate Change and Global Warming lead to legislation of new energy regulations and strengthen existing ones. The current architectural design methods (2D CAD) take a lot of time and effort to verify energy codes and are hard to adjust according to the design changes. The purpose of this study is to show the effectiveness of the BIM in building envelop energy modeling of the housing project. In the process of design method change, We could contribute to increasing productivity and efficiency in building energy verification through BIM because the updated value could be calculated simultaneously without information omission or recalculation process. The procedure for the study is as follows. Using BIM of the Goldin at Essex Crosing Housing Project by Revit 2011 as a case model, this study analyze the criteria for energy plan to conform to the energy code in NYC. The result value from the setting of the Revit model is compared with the reference value required by the NYC Energy Code. Finally, the data from BIM are entered into COMckeck, the energy verification program provided by U.S. Department of Energy, to check whether the building envelope energy performance conforms to NYC Energy Code.

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.201-207
• /
• 2015

The new function of 3DVH software for dose calculation inside the patient undergoing TomoTherapy treatment by applying the measured data obtained by ArcCHECK was recently released. In this study, the dosimetric accuracy of 3DVH for the TomoTherapy DQA process was evaluated by the comparison of measured dose distribution with the dose calculated using 3DVH. The 2D diode detector array MapCHECK phantom was used for the TomoTherapy planning of virtual patient and for the measurement of the compared dose. The average pass rate of gamma evaluation between the measured dose in the MapCHECK phantom and the recalculated dose in 3DVH was $92.6{\pm}3.5%$, and the error was greater than the average pass rate, $99.0{\pm}1.2%$, in the gamma evaluation results with the dose calculated in TomoTherapy planning system. The error was also greater than that in the gamma evaluation results in the RapidArc analysis, which showed the average pass rate of $99.3{\pm}0.9%$. The evaluated accuracy of 3DVH software for TomoTherapy DQA process in this study seemed to have some uncertainty for the clinical use. It is recommended to perform a proper analysis before using the 3DVH software for dose recalculation of the patient in the TomoTherapy DQA process considering the initial application stage in clinical use.

• The Journal of Korean Medicine
• /
• v.17 no.2 s.32
• /
• pp.337-393
• /
• 1996

The purpose of this study is to evaluate and standardize the four scales of Questionnaire for the Sasang Constitution Classification 　II (QSCCII). QSCCII is newly prepared by statistical item analysis and is designed to examine its diagnostic discriminability. QSCCII is administered to 1366 random informants. From the survey, we could get the data for the standardization. The criteria of standardization are based on the data from 265 informants who are examined by professionals. Collectted data are analyzed by internal consistency, variation analysis(ANOVA), Duncan test and discrimination analysis of SPSS PC+ V4.0 program. The results are as follows reliability of four scales for QSCCII is relatively valid. The internal consistency of Tae-yang(太陽) (太陽) scale is Cronbach's a=0.5708. That of So-yang(少陽) scale is a=0.5708. That of Tae-eum(太陰) scale is a =0.5922. That of So-eum(少陰) scale is a=0.6319. 2. There is a significant difference between each group through variation analysis of four scales. 3. The process of standardization is based on the average value and standard deviation with respect to age and sex difference of each criteria 4. This study suggests a source of standardization of Sasang Constitution Classification by providing norms in which the differences of age, sex, and number of items are taken into deep consideration. QSCC Ⅱ, therefore, can be applied to every age(the 10's to the 60's) and sex groups. 5. The recalculation of the raw-score to standard value (T-score) shows that the diagnostic discriminability (Hit-ratio: 70.08%) of QSCC Ⅱ brings about 37% improvement than proportional chance criteria (33.33%). Especially, Hit-ratios of Tae-eum In(74.5%) and So-eum In(70.8%) are higher than that of So-yang In(60.0%). 6. QSCC has discriminability only to male informants. Compared with QSCC, however, QSCC II has relatively efficient discriminability both to male and female informants. 7. These results would be a demonstration of the fact that the QSCC II could be used as a tool for sasang constitution classification.