• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.585-590
• /
• 1999

There is still a lack of knowledge and modelling relating to shear behaviour in reinforced concrete beams. The reason is that shear loading leads to complicated physical mecanisms, such as interlock action, dowel action, etc. Therefore, It is difficult that we make the ideal model of shear behaviour, while Truss model theory has been made good use of shear design because of simplicity and reasonableness. In this study, 6 T-type reinforced concrete beams were designed and made based on the two truss models, i.e, the plasticity truss model and the compatibility truss model, to observe shear strength of concrete and stress distribution of stirrups. 6 beams test pieces were tested with the following testing parameters. 1) specified concrete strength ; 270kg/$\textrm{cm}^2$, 400kg/$\textrm{cm}^2$ 2) with and without the steel fiber.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.05a
• /
• pp.135-143
• /
• 2002

On a conceptual point of SCM, as a order of development, physical distribution, logistics management, basic supply chain management and advanced supply chain management etc. they are magnifying gradually, confusing with information and analysis techniques which seems possible. But on executing, it has a lot of problems because it is so complex and wide, so the enterprise which knows necessity of SCM, they don't have a total execution solution. On this paper, we will focus a proposal of alternatives with reasonableness of manufacturing and making a profit of sales department like most of enterprises to overcome carelessness and unready strategy of investment. And we will find a element through a analysis of cases, a statistical method of effective SCM, and actual survey to propose a alternative proposal. And, we will prove the facts that it could be a guiding company which has a ability of cooperation with entities through the founding of supply chain.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.131-136
• /
• 1999

This paper proposes the robot inverse calibration method using a neural networks. A highorder networks called Pi-Sigma networks has been used. The Pi-Sigma networks uses linear summing units in the hidden layer and product unit in output layer. The inverse calibration model which compensates the difference of joint variables only between measuring value and analytic value about the desired pose(position, orientation) of a robot is proposed. The compensated values are determined by using the weights obtained from the learning process of the neural networks previously. To prove the reasonableness, the SCARA type direct drive robot(4-DOF) and anthropomorphic robot(6-DOF) are simulated. It shows that the proposed calibration method can reduce the errors of the joint variables from $\pm$2$^{\circ}$to $\pm$ 0.1$^{\circ}$.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.107-110
• /
• 2004

Application of aluminum alloy has been increasing for most of industry area because aluminum has a good mechanical properties and castability, especially automotive field for weight reduction. But, Furnace industry is sluggish. The purpose of this study is numerical analysis of aluminum holding furnace for reasonableness estimation when we design for new model of furnace. The numerical simulation involving fluid flow of inside air and heat transfer to fireproof material is presented in order to improve the understanding of aluminum furnace. First of all, we are carried out numerically for the two dimensional inside convection and surface radiation heat transfer in a square enclosure. Subsequently, we are established the analysis method of aluminum furnace considering natural convective heat transfer

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.637-642
• /
• 2005

The objective of this study is to evaluate design parameters of free water surface constructed wetland for the reduction of agricultural nonpoint source pollution. From literature review, the key design parameters were selected as influent concentration, influent water volume, hydraulic retention time and wetland system arrangement. The design value for each parameter was established after pilot study. Full-scale constructed wetland on the basis of the designed values was constructed to evaluate those reasonableness. The results of this study showed that the designed values for free water surface constructed wetland were appropriate for the reduction of agricultural nonpoint source pollution.

• Journal of the Korean Society for Railway
• /
• v.8 no.1
• /
• pp.93-100
• /
• 2005

The turnout system is typical railway facility to be in the way of conventional railway line's speed-up. The KNR(Korean National Railroad) has a speed limit regulation (130km/h) for the passing the turnout to guarantee a safety. This research had been performed to confirm the propriety of this regulation by using experimental and analytical way before it was carried out. The reasonableness of the speed-limit regulation was judged base on the several experiments. It was proved that the regulation was not useless as it had been regarded and very important guide at least up to now.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.366-371
• /
• 2012

In this paper, we propose an electric circuit using one common-arm of H-Bridge inverters to reduce the number of switching components in the multi-level inverter combined with H-Bridge inverters and transformers. And furthermore, we suggested a new multi-level PWM inverter using PWM level to reduce THD (Total Harmonic Distortion). We use a phase-shift switching method that has the same rate of usage at each transformer. Also, we test the proposed prototype 9-level inverter to clarify the proposed electric circuit and reasonableness of the control signal for the proposed multi-level PWM inverter.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.1
• /
• pp.115-129
• /
• 2002

On a conceptual point of SCM, as a order of development, physical distribution, logistics management, basic supply chain management and advanced supply chain management etc. they are magnifying gradually, confusing with information and analysis techniques which seems possible. But on executing, it has a lot of problems because it is so complex and wide, so the enterprise which knows necessity of SCM, they don't have a total execution solution. On this paper, we will focus a proposal of alternatives with reasonableness of manufacturing and making a profit of sales department like most of enterprises to overcome carelessness and unready strategy of investment. And we will find a element through a analysis of cases, a statistical method of effective SCM, and actual survey to propose a alternative proposal. And, we will Prove the facts that it could be a guiding company which has a ability of cooperation with entities through the founding of supply chain, On the conclusion, we will show the variation which influences for capacity entities and alternative proposal to define a element which influence for a cause and effect basically.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.711-714
• /
• 2005

In this paper, we proposed the electric circuit using one common arm of H-Bridge Inverters to reduce the number of switching component in multi-level PWM inverter combined with H-Bridge Inverters and Transformers. and we proposed the switching method that can be same rate of usage at each transformer. Also, we tested the proposed prototype inverter to clarify the proposed electric circuit and reasonableness of control signal.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.655-658
• /
• 2005

In this paper, we proposed the electric circuit using one common arm of H-Bridge Inverters to reduce the number of switching component in multi-level inverter combined with H-Bridge Inverters and Transformers. and furthermore we suggested the new multi-level PWU inverter using PWM level to reduce THD(Total Harmonic Distortion). and we used the switching method that can be same rate of usage at each transformer. Also, we tested the proposed prototype 9-level inverter to clarify the proposed electric circuit and reasonableness of control signal for the proposed multi-level PWM inverter.