• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.670-676
• /
• 2002

The object of ATM network is to the guarantee quality of service(QoS). Therefore, various of traffic management schemes have been proposed. Among these schemes, call admission control(CAC) is very important to provide real-time services and ON-OFF model, which is single source traffic model, has been used. But ON-OFF model differ from GCRA(Generic Cell Rate Algorithm) controlled traffic in ATM network. In this paper, we analyze the traffic, which is controlled as dual GCRA, and propose TWM(Three-state Worst-case Model), which is new single source traffic model. We also proposed CAC to guarantee peak-to-peak CDV(Cell Delay Variation) based on the TWM. In experiments, ON-OFF model and TWM are compared to show that TWM is superior to ON-Off model in terms of QoS guaranteeing.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.102-108
• /
• 2002

This paper handles the design of a real time traffic data acquisition system using loop detector and piezo-electric sensor to acquire the vehicle information EISA compatible parallel I/O interface card is designed to sample 30 I/O channels at variable rates for raw traffic data acquisition. The control software is designed to generate the traffic data informations from the raw data. The traffic data information provides vehicle length, speed, number of axles, etc. Vehicle types are detected and categorized into eleven types from the vehicle length, axles positions and axle counts information. The traffic information is formed into packet and transferred to the remote hosts through serial communications for ITS applications.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.3
• /
• pp.59-71
• /
• 2018

This study was initiated to develop an optimal signal control algorithm for coordinated signalized intersections using individual vehicle's information which can be collected in a format of prove vehicle data (PVD) via V2I (Vehicle to Infrastructure) communication environment. For developing this signal optimization algorithm, three modules were developed for phase group length computation, split distribution, and phase sequence assignment. The simulation analysis using the microscopic simulation model, Vissim, was conducted for evaluating the effectiveness of the developed algorithm. The analysis result represented that the performance of the developed algorithm is far superior to that of the fixed coordinated signal control method which is the most common signal control method for coordinated signalized intersections in Korea.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.450-461
• /
• 2007

In this paper, we propose the method to use power-saving mode (PSM) applicable to non real-time traffic and PSM applicable to real-time traffic simultaneously, for VoIP traffic with silence suppression. The proposed method uses PSC II during talk-spurt interval of parties A and/or B and uses PSC I or probabilistic sleep interval decision (PSID) method during mutual silence interval, respectively. To evaluate the performance of hybrid PSM (HPSM) based on PSC II or PSID method, we present average buffering delay, energy consumption of mobile station and VoIP packet drop probability with simulation runs. Results shows that proposed HPSM decreases energy consumption of mobile station up to 25 % while satisfying the packet drop probability within QoS requirement in case of end-to-end VoIP connection.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.4
• /
• pp.312-333
• /
• 2005

SIP(Session Initiation Protocol) has been proposed for session control protocol of Internet multimedia communication system like VoIP(Voice over IP). SIP has complicated session control steps to support various kinds of audio and video formats and to assure service quality of real time data communication. Up until now, existing protocol analyzers can not provide such detailed information of SIP based communication system. In this paper, therefore, we propose a new protocol analyzer as a tool that can analyze and diagnose SIP based multimedia communication system throughout the session initiation, data exchange and session change steps. The propose traffic analyzer, which is called STAT(SIP based Traffic Analysis Tool), Is implemented on Winder's environment so that it is generally usable and extensible. Since STAT analyze low level packets captured via Ethernet broadcasting property, it is able to provide session status and real time traffic monitoring information without any affection to the communication system. The STAT which is implemented in this paper. therefore, is expected to be a useful tool for developing and managing of a SIP based multimedia communication system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.1-6
• /
• 2021

Determining the percentage of negligence between the parties in the event of road traffic accidents is a significant problem. In order to provide users with more accurate criteria for determining the percentage of negligence, several companies are providing services. However, services currently available are limited to immediate use at the scene of an accident. Generally, the service that determines the percentage of negligence can be used after all accident handling procedures have been completed. This paper provides a real-time traffic accident type and fault rate information provision service utilizing a deep learning-based predictive model to overcome these limitations. Users can immediately identify accident types and fault information by taking pictures at the accident site and check actual precedents of the same accident type. Users will be able to use the service to more accurately and reliably determine the percentage of negligence and handle incidents.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3D
• /
• pp.335-345
• /
• 2009

Generally, density is used as a measure of effectiveness (MOE) of the level of service (LOS) for the basic segment of the roadway facility, but can not express the operational condition of the roadway facility properly because there can be an error in the computed density compared with the density measured in the field. Thus, the purpose of this study is to investigate the real-time traffic characteristic data (traffic flow, speed, occupancy, headway, spacing, etc.) from the detectors installed on the mainline section of urban freeway under the study, analyze the maximum flow rate from the relationship between the real-time traffic characteristics collected, and evaluate the LOS criteria within the basic segment of the urban freeway based on the relationship between the occupancy and the v/c ratio depending on the level of service.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1332-1335
• /
• 2008

In order to various service types of real time and non-real time traffic with varying requirements are transmitted over the IEEE 802.16 standard is expected to provide quality of service(QoS) researchers have explored to provide a queue management scheme with differentiated loss guarantees for the future Internet. The sides of a packet drop rate, an each class to differential drop probability on achieving a low delay and high traffic intensity. Improved a queue management scheme to be enhanced to offer a drop probability is desired necessarily. This paper considers multiple random early detection with differential drop probability which is a slightly modified version of the Multiple-RED(Random Early Detection) model, to get the performance of the best suited, we analyzes its main control parameters (max_th, min_th, max_p) for achieving the proportional loss differentiation (PLD) model, and gives their setting guidance from the analytic approach. we propose Dynamic-multiple queue management scheme based on differential drop probability, called Dynamic-VQSDDP(Variable Queue State Differential Drop Probability)T, is proposed to overcome M-RED's shortcoming as well as supports static max_p parameter setting values for relative and each class proportional loss differentiation. M-RED is static according to the situation of the network traffic, Network environment is very dynamic situation. Therefore max_p parameter values needs to modify too to the constantly and dynamic. The verification of the guidance is shown with figuring out loss probability using a proposed algorithm under dynamic offered load and is also selection problem of optimal values of parameters for high traffic intensity and show that Dynamic-VQSDDP has the better performance in terms of packet drop rate. We also demonstrated using an ns-2 network simulation.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.181-190
• /
• 2022

In this paper, we use a LiDAR sensor and an image camera to detect a left-turning waiting vehicle in two ways, unlike the existing image-type or loop-type left-turn detection system, and a left-turn traffic signal corresponding to the waiting length of the left-turning lane. A system that can efficiently assign a system is introduced. For the LiDAR signal transmitted and received by the LiDAR sensor, the left-turn waiting vehicle is detected in real time, and the image by the video camera is analyzed in real time or at regular intervals, thereby reducing unnecessary computational processing and enabling real-time sensitive processing. As a result of performing a performance test for 5 hours every day for one week with an intersection simulation using an actual signal processor, a detection rate of 99.9%, which was improved by 3% to 5% compared to the existing method, was recorded. The advantage is that 99.9% of vehicles waiting to turn left are detected by the LiDAR sensor, and even if an intentional omission of detection occurs, an immediate response is possible through self-correction using the video, so the excessive waiting time of vehicles waiting to turn left is controlled by all lanes in the intersection. was able to guide the flow of traffic smoothly. In addition, when applied to an intersection in the outskirts of which left-turning vehicles are rare, service reliability and efficiency can be improved by reducing unnecessary signal costs.

• Journal of information and communication convergence engineering
• /
• v.19 no.1
• /
• pp.16-21
• /
• 2021

In this paper, to prevent accidents of school vehicles used by students, which have emerged as a continuous social problem, a boarding and leaving notification system using Bluetooth beacons is proposed. The platform structure uses Bluetooth, a smartphone, and an application, and provides real-time message reception between parents and teachers. It is not simply a system with Bluetooth capability alone, but also an IcT technology that is closely related to real life using two-way communication. The purpose is to provide user-friendly ICT technology as an integrated system for more practical effects. Two-way exchange of information between parents and teachers using cloud servers is made possible. By using this Bluetooth beacon notification system, safety accidents in student vehicles are reduced, which brings confidence from traffic accidents to schoolchildren of parents and teachers. Therefore, it is expected that parents and teachers are expected to improve their mental stability and quality of life from traffic accidents.