• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1225-1236
• /
• 1999

기존의 오류 제어 방법들은 실시간 특성과 신축적인 신뢰성을 가지는 멀티미디어 통신 응용의 특징을 충분히 반영하지 못하고 있다. 본 연구는 기존의 재전송을 기반으로 하는 방법에 두 가지 기법을 추가하여 이 문제에 접근하였다. 첫째, 실시간 데이타의 마감 시간을 고려하여 미리 재전송을 실시하는 사전 재전송과 시간적으로 불가능하다고 판단될 때 복구를 포기하는 재전송 포기를 통한 적시 재전송 기법이다. 둘째, 요구되는 신뢰성에 근접하도록 오류가 많이 발생하였을 때만 재전송을 하는 선택적 오류 제어 기법이다. 본 연구는 두 기법을 적용한 오류 제어 프로토콜을 구현하고 네트워크 환경을 바꾸어 가며 성능을 검사하였다. 실험 결과, 제안된 오류 제어 방법은 전체적인 오류 제어 부하는 감소시키면서 오류 복구율을 높인다는 점을 확인하였다.Abstract The current error control schemes do not fit well to the characteristics of multimedia communications: real-time transmission and flexible reliability requirements. This research proposes a new error control scheme, which extends the retransmission-based error control with the following two mechanisms. First, error recovery is performed in two timely fashions: one is retransmission in advance where a retransmission is performed early enough for the deadline if an error is suspected, and the other is retransmission abort where a retransmission is given up if its recovery within the deadline seems to be impossible. Second, error control is selectively performed only when an actual error rate approaches to the threshold on a given reliability requirement. The proposed scheme has been implemented and experimented in various network environments. The performance results show that it has lower control overhead and higher error recovery than the existing schemes.

• The KIPS Transactions:PartD
• /
• v.16D no.2
• /
• pp.249-256
• /
• 2009

This paper introduces an efficient USN (ubiquitous sensor network) for monitoring blind areas in a skiing resort, developed as a part of u-Sport showcase project of Gangwon Province. Blind areas of a skiing resort are dangerous and/or steep areas located aroud ski slopes, which are rarely traveled and not easily seen by a ski patrol. If an accident occurs in such a blind area, the main control center of the sking resort can hardly recognize the accident and provide first aid and rescue services promptly. The blind area monitoring system proposed in this paper monitors a blind area of a skiing resort using five battery-powered sensor nodes each of which has an image sensor on it and wirelessly transmits images around the blind area to the main control center on a regular basis, therebly allowing real-time monitoring of the blind area and prompt rescue services in case of accidents. Additionally, the monitoring system provides an emergency button which skiers injured in the blind area can push. If the button is pushed, an image around the button and an alarm signal are transmitted to the main control center and therefore the main control center can take prompt actions for rescuing the injured skiers.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.686-689
• /
• 2018

3D 손 포즈 추정(Hand Pose Estimation, HPE)은 스마트 인간 컴퓨터 인터페이스를 위해서 중요한 기술이다. 이 연구에서는 딥러닝 방법을 기반으로 하여 단일 RGB-Depth 카메라로 촬영한 양손의 3D 손 자세를 실시간으로 인식하는 손 포즈 추정 시스템을 제시한다. 손 포즈 추정 시스템은 4단계로 구성된다. 첫째, Skin Detection 및 Depth cutting 알고리즘을 사용하여 양손을 RGB와 깊이 영상에서 감지하고 추출한다. 둘째, Convolutional Neural Network(CNN) Classifier는 오른손과 왼손을 구별하는데 사용된다. CNN Classifier 는 3개의 convolution layer와 2개의 Fully-Connected Layer로 구성되어 있으며, 추출된 깊이 영상을 입력으로 사용한다. 셋째, 학습된 CNN regressor는 추출된 왼쪽 및 오른쪽 손의 깊이 영상에서 손 관절을 추정하기 위해 다수의 Convolutional Layers, Pooling Layers, Fully Connected Layers로 구성된다. CNN classifier와 regressor는 22,000개 깊이 영상 데이터셋으로 학습된다. 마지막으로, 각 손의 3D 손 자세는 추정된 손 관절 정보로부터 재구성된다. 테스트 결과, CNN classifier는 오른쪽 손과 왼쪽 손을 96.9%의 정확도로 구별할 수 있으며, CNN regressor는 형균 8.48mm의 오차 범위로 3D 손 관절 정보를 추정할 수 있다. 본 연구에서 제안하는 손 포즈 추정 시스템은 가상 현실(virtual reality, VR), 증강 현실(Augmented Reality, AR) 및 융합 현실 (Mixed Reality, MR) 응용 프로그램을 포함한 다양한 응용 분야에서 사용할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2032-2033
• /
• 2007

There has been increasing interests of condition monitoring and diagnosis for electric equipment, which lead to the development of this system domestic and abroad. In the past, operators' interest was how to quickly repair and restore the electric equipments after failure. But, due to the North American Blackout in 2003 and the aging of equipments, users have paid attention to the condition based monitoring of electric equipment to prevent a fault like outrage. GIS-PDS("GIS Preventive and Diagnosis System") requiresa large amount of measurement data with timeliness for monitoring and analysis of real-time state of GIS(Gas Insulated Switchgear). We developed the timeliness-guaranteed communication device for GIS-PDS.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.72-80
• /
• 2010

This study suggests ubiquitous railway disaster prevention system that gearing Ubiquitous Sensor Network system information take to the subway fire accident information which emergency response procedure as occurring subway fire accident scenario. Also it is proposed that emergency response system though fire scenario. collected Information was analyzed each system over providing information and it is designed to exchanging information structure though relation system. The ubiquitous railway disaster prevention system basically consists by four unit stages as prevention, preparedness, response and recovery system. Especially, in this system can supply real time accident information to the relevant government offices and public through forecasting and warning system by utilizing recognition of the five senses in case of accident. also, it is build that to make decisions as linking 2-dimension and 3-dimension space information interface of ubiquitous sensor networks and expected scenarios.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.1
• /
• pp.27-34
• /
• 2002

There is much interest on information communications owing to the rapid development of network and IT(Information Technology). Analog signals are converted into digital signals for information communications. However, it is very difficult to completely erase the distortion induced during the conversion of analog signals such as voices and images into digital signals. Existing audio graphic equalizer requires very complex processes to calculate the gain and coefficients of the higher-order filter which is required to generate natural sound and to satisfy the need of each person. Unfortunately it is uneconomical and very difficult to embed the existing digital audio equalizer in the system because of the complexity of the existing digital audio equalizer for high quality sound. This paper discusses the design of a new digital audio graphic equalizer(DAGEQ) which can improve system performance and the quality of audio sound, and can be embedded in the system. This new DAGEQ is designed so that the gain can be controlled automatically. The automatic control of coefficients and gain empowers real time processing and the improvement of audio quality.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.621-632
• /
• 2004

Recent measurement studies of real teletraffic data in modern telecommunication networks have shown that self-similar (or fractal) processes may provide better models of teletraffic in modern telecommunication networks than Poisson processes. If this is not taken into account, it can lead to inaccurate conclusions about performance of telecommunication networks. Thus, an important requirement for conducting simulation studies of telecommunication networks is the ability to generate long synthetic stochastic self-similar sequences. A new generator of pseu-do-random self-similar sequences, based on the fractional Gaussian nois and a wavelet transform, is proposed and analysed in this paper. Specifically, this generator uses Daubechies wavelets. The motivation behind this selection of wavelets is that Daubechies wavelets lead to more accurate results by better matching the self-similar structure of long range dependent processes, than other types of wavelets. The statistical accuracy and time required to produce sequences of a given (long) length are experimentally studied. This generator shows a high level of accuracy of the output data (in the sense of the Hurst parameter) and is fast. Its theoretical algorithmic complexity is 0(n).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.791-799
• /
• 2008

An image recognition for surrounding conditions is very important in image transmission. In recently rears, as the information infrastructure is more general, the user-centered demands in which they want to identify by object's states image using wire or wireless environment have increased. However, existing mobile solution could be hard to expect high quality mage, because limitation of software processing according as network based on mobile terminal which has low band width supports software codec. To solve this weak point, this paper describes on hardware codec design based on MPEG-4 which is international video compression standard. Implemented system contains the embedded CPU for optimized design and it works high quality service as transmission speed and resolution in mobile circumstance.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.473-480
• /
• 2019

The smart home is a technology that can monitor and control by connecting everything to a communication network in various fields such as home appliances, energy consumers, and security devices. The Smart home is developing not only automatic control but also learning situation and user's taste and providing the result accordingly. This paper proposes a model that can provide a comfortable indoor environment control service for the user's characteristics by detecting the user's behavior as well as the automatic remote control service. The whole system consists of ESP 8266 with sensor and Wi-Fi, Firebase as a real-time database, and a smartphone application. This model is divided into functions such as learning mode when the home appliance is operated, learning control through learning results, and automatic ventilation using indoor and outdoor sensor values. The study used moving averages for temperature and humidity in the control of home appliances such as air conditioners, humidifiers and air purifiers. This system can provide higher quality service by analyzing and predicting user's characteristics through various machine learning and deep learning.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.158-158
• /
• 2015

대부분의 대규모 배수지는 고지대에 위치함으로써 자연유하를 통해 배, 급수지역으로 용수를 공급한다. 이를 위해 배수지 전단에는 가압장이 위치하여 정수장에서 처리된 용수를 고지대에 위치한 배수지로 송수한다. 이때 가압장에서 발생하는 전력소비량이 매우 높은 것으로 알려져 있으며, 효율적인 펌프운영을 통해 상당한 전력비용 절감이 가능할 것으로 판단된다. 일반적인 가압장의 운영은 시스템 운영자의 경험을 토대로 해당 가압장에 연결된 배수지의 수위에 따라 펌프의 작동여부를 결정하는 방법이 주로 사용되고 있다. 이러한 운영방법은 용수공급의 안전성을 우선시함으로써 배수지의 수위를 일정하게 유지하고자 빈번하게 펌프를 작동하게 되고 따라서 가압장에서 소모되는 전력량이 커서 운영효율 측면에서는 바람직하지 않다고 할 수 있다. 또한 빈번한 펌프의 작동으로 인해 펌프의 수명이 단축될 뿐만 아니라, 배수지내 용수의 수질저하 문제도 발생할 수 있다. 본 연구에서는 효율적인 펌프장 운영을 위해 급수지역의 24시간 용수사용량을 예측하고, 그에 따른 펌프장의 가압 유량 및 양정을 파악하여 적정용량의 펌프를 선정하고 운영함으로써 펌프의 운영비용의 최소화 및 안정적인 용수공급을 동시에 달성하고자 한다. 이를 위해, 실시간 최적화 모형을 개발하였다. 개발된 최적화 모형은 상수관망해석 프로그램(EPAENT)을 연계하여 수요절점의 수압조건 및 운영상황을 모의하였다. 최적화 기법으로는 유전자알고리즘을 사용하였으며, 실제 시스템의 운영상황를 반영하기 위한 다양한 제약조건(operational constraints)을 적용하였다. 개발된 모형은 정속펌프(혹은 On/Off 펌프) 뿐만 아니라, 최근 실무에서 널리 사용되고 있는 변속펌프(variable speed pump)를 추가적으로 고려하였다. 개발된 모형은 국내에서 실제 운영되고 있는 송, 배수 시스템에 적용하여 모형의 실무 적용가능성을 검증하였다.