• Journal of Ocean Engineering and Technology
• /
• v.12 no.2 s.28
• /
• pp.139-146
• /
• 1998

This paper introduces a network system for monitoring coastal oceanographic data. The network system consists of three parts such as the buoy to observe oceanographic data, the local site to collect data transferred from buoys, and the host site to construct the oceanographic data-base and to share the information for monitoring coastal oceanographic data. The buoy has a one-board microcomputer to manage and to acquire coastal environment data in real-time. A wireless and wire communication technique is employed in order to transfer data measured by buoys and to link local and host sites, respectively. In measuring coastal environment data, this system shows more cost-effective way than the presents conventional. In addition, the realtime monitoring system continuously from various sites with the network systems.

• Journal of International Society for Simulation Surgery
• /
• v.4 no.1
• /
• pp.17-20
• /
• 2017

Purpose Interactive 3D visualization system through remote data transmission over heterogeneous network is growing due to the improvement of internet based real time streaming technology. Materials and Methods The current internet's IP layer has several weaknesses against IP spoofing or IP sniffing type of network attacks since it was developed for reliable packet exchange. In order to compensate the security issues with normal IP layer, we designed a remote medical visualization system, based on Virtual Private Network. Results Particularly in hospital, if there are many surgeons that need to receive the streaming information, too much load on the gateway can results in deficit of processing power and cause the delay. Conclusion End to end security through the network method would be required.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.60-66
• /
• 2009

The acceleration noise is valuable index to monitor traffic stability. However, the previous study was performed for the acceleration noise of individual vehicle. The consideration of the acceleration noise for vehicle in the network has not been studied yet. This paper proposes a new macroscopic traffic flow monitoring method based on applying network acceleration noise.

• Laser Solutions
• /
• v.2 no.3
• /
• pp.19-31
• /
• 1999

This paper introduces the monitoring scheme of laser welding quality using neural network. The developed monitoring scheme detects light signal emitting from plasma formed above the weld pool with optic sensor and DSP-based signal processor, and analyzes to give a guidance about the weld quality. It can automatically detect defects of laser weld and further give an information about what kind of defects it is, specially partial penetration and porosity among the interior defects. Those could be detected only by naked eyes or X-ray after welding, which needs more processes and costs in mass production. The monitoring scheme extracts four feature vectors from signal processing results of optical measuring data. In order to classify pattern for extracted feature vectors and to decide defects, it uses single-layer neural network with perceptron learning. The monitoring result using only the first feature vector shows confidence rate in recognition of 90%($\pm$5) and decides whether normal status or defects status in real time.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2008

The ubiquitous sensor network technique is widely applied to variety of information fields such as home automations, logistics, traffic controls, public administrations, health and environment monitoring and etc. It is particularly useful in the areas where energy consumption is minimal and where continuous monitoring of the surrounding environments, which generates streams of data, are required. In this study, we have designed and implemented a living environment automatic control system which collects the streams of temperature, humidity, light and noise data of a simulated house setting in real-time fashion, then controls the home environment based on the collected data according to the users favorites. In order to differentiate the proposed system from the currently existing similar system, we have demonstrated not only the feasibility of collecting data using sensor network in the controlled environment but also the ability to control the various household equipments through wireless communications.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.1
• /
• pp.41-52
• /
• 2012

Recently, FlexRay was developed to replace controller area network (CAN) protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. FlexRay network systems require correct synchronization and complex scheduling parameters. However, because platform configuration register (PCR) setting and message scheduling is complex and bothersome task, FlexRay is more difficult to implement in applications than CAN protocol. To assist a network designer for implementing FlexRay cluster, this paper presents an analysis of FlexRay platform configuration register and automatic generation program of PCR. To demonstrate the feasibility of the automatic generation program, we evaluated its performance using experimental testbed.

• Journal of Information Processing Systems
• /
• v.5 no.1
• /
• pp.25-32
• /
• 2009

It is absolutely essential to implement advanced IP network technologies such as QoS, Multicast, High Availability, and Security in order to provide real-time services like IPTV via IP backbone network. In reality, the existing commercial networks of internet service providers are subject to certain technical difficulties and limitations in embodying those technologies. On-going research efforts involve the experimental engineering works and implementation experience to trigger IPTV service on the premium-level IP backbone which has recently been developed. This paper introduces the core network technologies that will enable the deployment of a high-quality IPTV service, and then proposes a suitable methodology for application and deployment policies on each technology to lead the establishment and globalization of the IPTV service.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.107-107
• /
• 2000

This paper focuses on a method to connect mobile devices such as mobile robot, ACV and UTC with Profibus network. In this paper, the IEEE 802.11 wireless LAN is used for wireless extension of Frofibus, and four major issues are introduced to implement the wireless extended Profibus; First, the integration method between Profibus and IEEE 802.11 is introduced. Second, the implementation method of gateway is proposed. Three, the virtual polling mode algorithm is developed for satisfaction of real-time characteristics required in industrial network. Finally, we implement a experimental model, and carried out the performance analysis of wireless extended Profibus. This results show that wireless extended Profibus is suitable to industrial network such as automated container terminal.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.61-62
• /
• 2006

A new neural network classifier is proposed for the automatic real-time surface inspection of high-speed cold steel strips having 11 different types of defects. 46 geometrical and gray-level features are extracted for the defect classification. 3241 samples of Posco's Kwangyang steel factory are used for training and testing the neural network classifier. The developed classifier produces plausible 15% error rate which is much better than 20-30% error rate of human vision inspection adopted in most of domestic steel factories.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1006-1025
• /
• 2012

Improving the quality of service in IP networks is a major challenge for real-time voice communications. In particular, packet arrival-delay variation, so-called "jitter," is one of the main factors that degrade the quality of voice in mobile devices with the voice-over Internet protocol (VoIP). To resolve this issue, a receiver-based enhanced timing recovery algorithm combined with active jitter estimation is proposed. The proposed algorithm copes with the effect of transmission jitter by expanding or compressing each packet according to the predicted network delay and variations. Additionally, the active network jitter estimation incorporates rapid detection of delay spikes and reacts to changes in network conditions. Extensive simulations have shown that the proposed algorithm delivers high voice quality by pursuing an optimal trade-off between average buffering delay and packet loss rate.