• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1270-1272
• /
• 2003

Smart card system is being used in many countries to improve access to their transportation systems. Especially for subway system that typically see high volumes of passengers at specific times of the days, it's critical to find a ray to collect fares without unnecessarily delaying passengers. The card consists of antenna, modulation and demodulation block, power supply module and memory. The antenna receives the power and data signal from reader. The FRAM is used as the inner memory. And it is a non-volatile memory and complements the problems, that is high consumption and low data processing speed, of using conventional EEPROM in the passive smart cart. In this paper, we analyze and design the RF passive smart card to apply to the fare collection for the subway gate system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.1
• /
• pp.9-16
• /
• 2009

In this paper, a method is proposed for the analysis of radiowave receiving characteristics of an ammunition with electric detonator. In this method, an ammunition with electric detonator is modelled as a receiving antenna with its gain obtained by computer simulation or measurement. The induced radiowave power is obtained by inserting the gain of the electric detonator in the antenna coupling formula. Radiowave receiving characteristics at very close distances are obtained by Treasuring the transmission coefficient between a half-wave dipole and the electric detonator model. Radiowave receiving characteristics of the electric detonator in a 105mm tank ammunition are obtained using the proposed method and the safety of the 900 MHz RFID reader on the detonator is assessed.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.23-30
• /
• 2007

RFID it reads information which is it writes, the semiconductor chip for and the radio frequency system which uses the hazard antenna it has built-in transmission of information it talks. Formation which is transmitted like this collection and America which it filtrates wey the RFID search service back to inform the location of the server which has commodity information which relates with an object past record server. The hazard where measurement analysis result the leader for electronic interference does not occur consequently together from with verification test the power level which is received from the antenna grade where it stands must maintain minimum -55dBm and the electronic interference will not occur with the fact that, antenna and reel his recognition distance the maximum 7m until the recognition which is possible but smooth hazard it must stand and and with the fact that it will do from within and and and 3-4m it must be used Jig it is thought.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.237-240
• /
• 2002

We have studied a RF energy transformation. In this paper, we introduced proximity sensor using RF energy transformation. We used 125kHz RF signal as carrier frequency and BPSK circuit, PNP proximity sensor and designed circuit to transmit to the reader through the antenna with data which sensor had acquired. Micro-controller, oscillator, power amp, FSK Modulation module are included in the circuit. Max 323 chip is applied to analog switch and used to HYP-30R10NA sensor chip.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.2
• /
• pp.133-138
• /
• 2011

RFID system can be used to improve object recognition, map building and localization for robot area. A novel method of indoor navigation system for a mobile robot is proposed using RFID technology. The mobile robot With a RFID reader and antenna is able to find what obstacles are located where in circumstance and can build the map similar to indoor circumstance by combining RFID information and distance data obtained from sensors. Using the map obtained, the mobile robot can avoid obstacles and finally reach the desired goal by $A^*$ algorithm. 3D map which has the advantage of robot navigation and manipulation is able to be built using z dimension of products. The proposed robot navigation system is proved to apply for SLAM and path planning in unknown circumstance through numerous experiments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.414-421
• /
• 2013

In this paper, a novel IFF(Identification of Friend and Foe) landmine system has been designed and fabricated using RFID(Radio Frequency Identification) wireless communication system. The IFF landmine system is composed of RECOMS(Remote Controlled Munition System), RFID reader and RFID tag. When the friendly forces have been identified by RFID wireless communication, the IFF landmine is unloaded automatically and indicates the warning message to the operator. Through the discussion, the detailed designs and the test results of identification distance have been described and antenna revision plans for improving the performance have been mentioned.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.263-268
• /
• 2010

This paper shows the key management system in a small metallic cabinet using a small UHF RFID tags. Each key chain with a key has a custom-designed small RFID tag antenna. There are 6 metallic racks in the small cabinet, and each rack can hold 60 key chains. Therefore, the small cabinet can hold 360 key chains with tags. The 360 key chains with RFID tags in a cabinet are recognized by RFID key chain management system. Even though it is hard to recognize 360 tags in the a cabinet, this RFID key management system with small custom designed RFID tags can recognize all the tags in the small cabinet. To read the all the tags, the locations of antennas and tag shapes are optimized. The reading rates based on the bios-version of the reader and the locations of the reader antennas are compared.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1130-1137
• /
• 2006

One of the important performance issues in large-scale RFID systems is to resolve collisions among responses from RFID tags. Considering two do facto anti-collision solutions, namely the binary-tree splitting algorithm and the Slotted-Aloha algorithm, we propose to use multi-packet reception (MPR) capability to enhance the RFID tag reading rate (i.e., throughput). MPR allows an RFID reader to receive multiple reponses transmitted by tags at the same time. We analyze the effect of MPR capability in the above anti-collision algorithms, which is also validated by simulation. The analysis and simulation results show that RFID reader antenna design and signal separation techniques play an important role in improving RFID system performance with MPR capability.

• Korean Journal of Ecology and Environment
• /
• v.55 no.4
• /
• pp.294-304
• /
• 2022

This study carried out from March 2021 to October 2021 in the upper part (St. 1) and middle part (St. 2) section of Yongsu stream, a branch of the Geum river, using PIT telemetry to understand the movement patterns and habitat characteristics of Odontobutis interrupta, a Korean endemic species. O. interrupta collection was used kick net (5×5 mm) and fish trap (5×5 mm). After collecting fish, PIT tag insertion was performed immediately in the site. Reader (HPR Plus Reader, biomark, USA) and portable Antenna (BP Plus Portable Antenna, biomark, USA) were used for detection of fish to monitoring the tagged O. interrupta. As a result of PIT telemetry applied to 70 individuals, mean movement distance was 36.5 (SE, ±6.6) m. There was a significant difference between total length and movement distance (P≤0.05). O. interrupta was mainly identified in average water depth, 36.2±1.9 cm, average water velocity, 0.03±0.07 m s^-1 and average distance from watershed, 4.4±0.3 m. Extent of rock used for habitat was varied from 32 to 4,000 cm². There was no statistical difference between the area of the first selected rock and the area of the after selected rock (P>0.05). but there was significant difference between total length and the area of the rock except for detection before 24 hours (P<0.01). Therefore, to restore the habitat, it is considered necessary to create various substrate structures by providing various habitat environments (water depth, flow rate, stone, etc.) for each individual size.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.287-295
• /
• 2010

RTLS used to track the location of object or person in real time. However, if there are a lot of tags and readers, the conventional single RTLS server may fail to estimate location of tags. And if the server cannot receive the tags signal due to pass-loss or NLOS from more than three readers, the server fail to estimate location of tags. In this paper, we propose a special reader which embeds RTLS location engine for distributed RTLS. And by using multi-directional antenna, alleviating multi-path effect and allowing estimate tag's location only using two readers. We also implement the system, we can reduce server packet 16times and get the all results of location estimate in single second. We achieved the location error within 1m.