• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3488-3493
• /
• 2022

Accelerator driven subcritical systems have long been discussed as facilities which can be used for solving the nuclear waste problem. The physics of these systems is very different from conventional reactors and new techniques had to be developed for reactivity monitoring. One such technique is the Area Ratio Method which studies the response of a subcritical system upon insertion of a large number of neutron pulses. An issue associated with this technique is the spatial dependence of measured reactivity which is intrinsic to the sub criticality of the system since the reactor does not operate on the fundamental mode and measured reactivity depends on the detector position. This is generally addressed by defining Bell-Glasstone spatial correction factor. This factor upon multiplication with measured reactivity gives the correct reactivity which is independent of detector location. Monte Carlo Methods are used for evaluating these factors. This paper presents a complete three dimensional map of spatial correction factors for BRAHMMA subcritical system. In addition, the dataset obtained also helps in identifying detector locations where the correction factor is close to unity, thereby implying no correction if the detector is used at those locations.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4491-4503
• /
• 2023

This study aimed to verify and validate the transient simulation capability of the hybrid code system RAST-F for fast reactor analysis. For this purpose, control rod (CR) drop experiments involving eight separate CRs and six CR groups in the China Experimental Fast Reactor (CEFR) start-up tests were utilized to simulate the CR drop transient. The RAST-F numerical solution, including the neutron population, time-dependent reactivity, and CR worth, was compared against the measurement values obtained from two out-of-core detectors. Moreover, the time-dependent reactivity and CR worth from RAST-F were verified against the results obtained by the Monte Carlo code Serpent using continuous energy nuclear data. A code-to-code comparison between Serpent and RAST-F showed good agreement in terms of time-dependent reactivity and CR worth. The discrepancy was less than 160 pcm for reactivity and less than 110 pcm for CR worth. RAST-F solution was almost identical to the measurement data in terms of neutron population and reactivity. All the calculated CR worth results agreed with experimental results within two standard deviations of experimental uncertainty for all CRs and CR groups. This work demonstrates that the RAST-F code system can be a potential tool for analyzing time-dependent phenomena in fast reactors.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1989.10a
• /
• pp.1-4
• /
• 1989

Recently, as the natural aggregates are exhausted, using the crashed stones bring the possibility of the alkali-aggregate reactivity. In this study, the samples are collected from the stony moutains chosen by using a geoligical survey map and analyzed in terms of the amount and the shape of the reaction minerals by a polarization microscope and X-ray diffraction which beling to the petrographic examination of aggregates for concrete. From this study, most samples of the sedimentary rocks and the granitte of the ignious rocks show the possibility of the alkali-aggregate reactivity.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.3
• /
• pp.194-196
• /
• 1997

Using the polyclonal antibody for Xanthomonas citri ampicillin acylase raised in Pseudomonas-free Balb/c mice, the immunochemical similarity of several types of penicillin acylases including Erwinia aroideae penicillin V acylase, Escherichia coli penicillin G acylase, Pseudomonas melanogenum and Acetobacter turbidans ampicillin acylases, and Pseudomonas cephalosporin acylase was examined. Among tested, only P. melanogenum ampicillin acylase showed the cross-reactivity with the antibody.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.1020-1028
• /
• 2012

This work compares various models for geminate reversible diffusion influenced reactions. The commonly utilized contact reactivity model (an extension of the Collins-Kimball radiation boundary condition) is augmented here by a volume reactivity model, which extends the celebrated Feynman-Kac equation for irreversible depletion within a reaction sphere. We obtain the exact analytic solution in Laplace space for an initially bound pair, which can dissociate, diffuse or undergo "sticky" recombination. We show that the same expression for the binding probability holds also for "mixed" reaction products. Two different derivations are pursued, yielding seemingly different expressions, which nevertheless coincide numerically. These binding probabilities and their Laplace transforms are compared graphically with those from the contact reactivity model and a previously suggested coarse grained approximation. Mathematically, all these Laplace transforms conform to a single generic equation, in which different reactionless Green's functions, g(s), are incorporated. In most of parameter space the sensitivity to g(s) is not large, so that the binding probabilities for the volume and contact reactivity models are rather similar.

• Journal of the Korean Ceramic Society
• /
• v.16 no.4
• /
• pp.237-242
• /
• 1979

In order to improve hydration reactivity of blast furnace slag, it's composition was changed by adding of CaO. The slags were quenched in water at 1,400℃. Hydration reactivityof modified slags was studied by x-ray diffractometer, conduction calorimeter and so on. Experimental results were summarized as follows. 1. Glass content and hydration reactivity of slag depend significantly on quenching temperature of the slag melt. To enhance the reactivity, slag melts which belongs to Frenkel-type liquid, must be quenched above 1,300℃. 2. Vitrification of slag melts was confirmed as CaO/SiO2 ratio increased up to 1.57 with flux, 1.51 without flux, also their hydration reactivity was improved.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.542-547
• /
• 1997

In the SSC(Super System Code), the reactivity feedback models of the Doppler effect and fuel axial expansion were modified to evaluate the safety performance of the metal-fueled core. The core radial expansion model was developed and implemented into the code as well. The transient analyses have been performed by the modified SSC for UTOP, ULOHS, ULOF/LOHS, and UTOP/LOF/LOHS events for one of the core design options being considered. Analysis results shows that the reactivity feedbacks can provide an inherent shutdown capability in response to key anticipated events without scram. Development of other reactivity feedback models and validation of these models against experimental data would make the SSC suitable for the assessment of the metal-fueled core safety performance.

• Journal of ILASS-Korea
• /
• v.16 no.1
• /
• pp.51-57
• /
• 2011

An experimental study was performed to explore characteristics of combustion and exhaust emissions in the compression ignition engine of RCCI (reactivity controlled compression ignition) using diesel-gasoline dual fuel. A dual-fuel reactivity controlled compression ignition concepts is demonstrated as a promising method to achieve high thermal efficiency and low emissions. For investigating combustion characteristics, engine experiments were performed in a light-duty diesel engine over a range of SOIs (start of injection) and gasoline percents. The experimental results showed that cases of diesel-gasoline dual fuel combustion is capable of operating over a middle range of engine loads with lower levels of NOx and soot, acceptable pressure rise rate, low ISFC (indicated specific fuel consumption), and high indicated thermal efficiency.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1340-1346
• /
• 2020

The aim of this paper is to explore the 8th-order Adams-Bashforth-Moulton (ABM8) method in the solution of the point reactor kinetics equations. The numerical experiment considers feedback reactivity by Doppler effects, and insertions of reactivity. The Doppler effects is approximated with an adiabatic nuclear reactor that is a typical approximation. The numerical results were compared and discussed with several solution methods. The CATS method was used as a benchmark method. According with the numerical experiments results, the ABM8 method can be considered as one of the main solution method for changes reactivity relatively large.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.122-124
• /
• 2002

The removal capacity of zero-valent iron for Cr(Ⅵ) was evaluated using batch kinetic tests. The rate constants for zero-valent iron dramatically increased as initial Cr(Ⅵ) concentration decreased. Generally, the reaction rates of Cr(Ⅵ) with zero-valent iron were faster than that of a biotic degradation of Cr(Ⅵ), and furthermore the reaction rates were inversely proportional to the initial Cr(Ⅵ) concentrations. After certain reaction time elapsed. no further decrease of Cr(Ⅵ) was observed, indicating a loss of iron reactivity. The loss of iron reactivity was primarily due to the passivation of iron surfaces with iron-Cr precipitates, but the reactivity of iron was recovered by adding iron-reducing bacteria. Even though the addition of bacteria itself removed Cr(Ⅵ), the combination of iron-reducing bactera and oxidized iron significantly enhanced the reaction rate for Cr(Ⅵ) removal. The results from column tests also confirmed that the innoculation of iron-reducing bacteria to the column containing completely oxidized iron partially enhanced the recovery of the iron reactivity.