• The Journal of Internal Korean Medicine
• /
• v.28 no.3
• /
• pp.453-463
• /
• 2007

Backgrounds : Glutathione-s-transferase (GST) is a kind of phase II metabolism enzyme and plays an important role in the detoxification of various toxic chemicals. It was reported that the genetic polymorphism of GSTM1 and GSTT1 genes may be responsible for asthma development and susceptibility to allergy. Traditional oriental medicine uses a unique diagnostic technique. differentiation-syndrome. to analyze signs and symptoms of patients synthetically. Through differentiation-syndrome. asthma patients can be divided into two groups: the deficiency syndrome group (DSG) and the excess syndrome group (ESG). Objectives : The purpose of this study was to investigate the possible association of GST gene polymorphism with clinical phenotype by differentiation-syndrome of bronchial asthma patients. Materials and Methods : One hundred and ten participants were evaluated by pulmonary function test. Patients with 53 DSG and 31 ESG by differentiation-syndrome were assessed for genetic analysis. GSTM1 and GSTT1 deletion polymorphism was performed by polymerase chain reaction (PCR). Results : GSTM1 gene deletion was detected in 43.4% of individuals in the DSG and in 38.71 % in the ESG. The distribution of GSTM1 polymorphism between DSG and ESG was not significantly different [$x^2$=0.1767, p=0.6742; OR(95% CI)=1.2139(0.4915-2.9979)]. The proportion of GSTT1 null genotypes was 41.51% in the DGS and 45.16% in the ESG. The distribution of GSTT1 polymorphism between DSG and ESG was also not significantly different [$x^2$=0.1065, p=0.7442; OR(95% CI)=0.8618(0.3525-2.1065)]. In the combined analysis of GSTM1 and GSTT1 genes, the frequency of both null type of GSTM1/GSTT1 genes was not significantly different from both positive type of GSTM1/GSTT1 genes[$x^2$=0.0768, p=0.7817; OR(95% CI)=1.2000(0.3303-4.3602)] Conclusions : These results indicate that polymorphism of the GST gene might not be associated with the symptomatic classification of DSG and ESG by differentiation-syndrome in Korean asthmatics.

• Biomolecules & Therapeutics
• /
• v.20 no.6
• /
• pp.538-543
• /
• 2012

The Maillard Reaction Products (MRPs) are chemical compounds which have been known to be effective in chemoprevention. Death receptors (DR) play a central role in directing apoptosis in several cancer cells. In our previous study, we demonstrated that (E)-2,4-bis(p-hydroxyphenyl)-2-butenal, a MRP product, inhibited human colon cancer cell growth by inducing apoptosis via nuclear factor-${\kappa}B$ (NF-${\kappa}B$) inactivation and $G_2$/M phase cell cycle arrest. In this study, (E)-2,4-bis(p-hydroxyphenyl)-2-butenal diacetate, a new (E)-2,4-bis(p-hydroxyphenyl)-2-butenal derivative, was synthesized to improve their solubility and stability in water and then evaluated against NCI-H460 and A549 human lung cancer cells. (E)-2,4-bis(p-hydroxyphenyl)-2-butenal diacetate reduced the viability in both cell lines in a time and dose-dependent manner. We also found that (E)-2,4-bis(p-hydroxyphenyl)-2-butenal diacetate increased apoptotic cell death through the upregulation of the expression of death receptor (DR)-3 and DR6 in both lung cancer cell lines. In addition to this, the transfection of DR3 siRNA diminished the growth inhibitory and apoptosis inducing effect of (E)-2,4-bis(p-hydroxyphenyl)-2-butenal diacetate on lung cancer cells, however these effects of (E)-2,4-bis(p-hydroxyphenyl)-2-butenal diacetate was not changed by DR6 siRNA. These results indicated that (E)-2,4-bis(p-hydroxyphenyl)-2-butenal diacetate inhibits human lung cancer cell growth via increasing apoptotic cell death by upregulation of the expression of DR3.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.250-250
• /
• 2012

Recently, multiferroic materials have attracted much attention due to their fascinating fundamental physical properties and potential technological applications in magnetic/ferroelectric data storage systems, quantum electromagnets, spintronics, and sensor devices. Among single-phase multiferroic materials, $BiFeO_3$, in particular, has received considerable attention because of its very interesting magnetoelectric properties for application to spintronics. Enhanced ferromagnetism was found by Fe-site ion substitution with magnetic ions. In this study, $BiFe_{1-x}Ni_xO_3$ (x=0 and 0.05) bulk ceramic compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Fe_3O_4$ and NiO powders were mixed with the stoichiometric proportions, and calcined at $450^{\circ}C$ for 24 h to produce $BiFe_{1-x}Ni_xO_3$. Then, the samples were directly put into the oven, which was heated up to $800^{\circ}C$ and sintered in air for 20 min. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The Raman measurements were carried out with a Raman spectrometer with 514.5-nm-excitation Ar+-laser source under air ambient condition on a focused area of $1-{\mu}m$ diameter. The field-dependent magnetization and the temperature-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The x-ray diffraction study demonstrates the compressive stress due to Ni substitution at the Fe site. $BiFe_{0.95}Ni_{0.05}O_3$ exhibits the rhombohedral perovskite structure R3c, similar to $BiFeO_3$. The lattice constant of $BiFe_{0.95}Ni_{0.05}O_3$ is smaller than of $BiFeO_3$ because of the smaller ionic radius of Ni3+ than that of Fe3+. The field-dependent magnetization of $BiFe_{0.95}Ni_{0.05}O_3$ exhibits a clear hysteresis loop at 300 K. The magnetic properties of $BiFe_{0.95}Ni_{0.05}O_3$ were improved at room temperature because of the existence of structurally compressive stress.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.319-328
• /
• 1994

Aluminium and titanium precursors containing $\beta$-diketonate ligands were used for the synthesis of polymeric sols of alumina and titania by sol-gel methods. To prepare polymeric sols by solgel processing, we synthesized modified precursors having chelating organic ligands. With these precursors it was found to be possible to control both hydrolysis and polycondensation reaction rates which resulted in ultrafine particles few nms of average size. The optimum molar ratio of acid to alkoxide for alumina sol was 0.3-0.4 and that of water to alkoxide &as 1. On the other hand, the corresponding ratios for titania sol were found be 0.25-0.20 and 1 respectively. Dynamic light scattering measurements indicated that the average particle size in both sols was in the order of few nms. SEM photographs were taken to observe crack-free and smooth surfaces of coated membranes after sintering at $450^{\circ}C$. Alumina coated membrane on a slide glass had about 4-4.5$\mu \textrm{m}$, thickness and titania coated one had 2-2.5$\mu \textrm{m}$, thickness. And according to TEM photographs, the grain size of titania was smaller than 30nm and that of alumina was in the range of few $\AA$s to 2nms. An X-ray diffraction study revealed that alumina was $\gamma$ phase and titania was anatase crystal.

• Korean Journal of Materials Research
• /
• v.10 no.2
• /
• pp.111-116
• /
• 2000

Fracture mode and carbide reactions of cast alloy 738LC during thermal exposure and creep at 816$^{\circ}C$/440MPa and 982$^{\circ}C$/152MPa were investigated. Crystallographic transgranular failure was observed in the specimen crept at 816$^{\circ}C$ due to shearing on the slip plane. Because selective oxidation at the grainboundaries which was exposed at the surface leads reduction in surface energy, however, early initiation of crack at the grainboundaries and intergranular failure were observed in the specimen crept at 982$^{\circ}C$/152MPa. As a result of decomposition of MC carbide at the tested temperatures, M(sub)23C(sub)6 carbide precipitated either on the grainboundaries or on the deformation band. The applied stress enhanced decomposition of MC. $\sigma$phase nucleated from Cr(sub)23C(sub)6 then grew to the ${\gamma}$+${\gamma}$\\` matrix. Precipitation of $\sigma$was accelerated by increasing temperature and applied stress.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.165-172
• /
• 2008

Kaolinite [$Al_2Si_2O_5(OH)_4$] used in these experiments was synthesized at 250$^{\circ}C$ for 36 hrs by a hydrothermal process from amorphous $Al(OH)_3$ and $SiO_2$. The change of the mineralogical properties of the phase synthesized were observed in the pH range 2 to 9. The synthetic kaolinite were characterized by the analytical methods of XRD, IR, DIA, and FE-SEM. Kaolinite was obtained in a wide range of pH. The phases with high- to midium- defect kaolinite with high thermal stability were obtained from the acidic conditions and high-defect kaolinite with low thermal stability from the basic conditions. These variations of kaolinite properties appears to be related to the pH dependence of kaolinite surface speciation. The peaks intensity and resolution of the kaolinite decrease according to the alkalinity of the solution by the results of the IR testing. And the peak intensity increases in the 60 to 70$^{\circ}C$ range due to dehydration reaction observed by TG-DTA. Such phenomena was the result of increase of unreacted amorphous materials in the high pH condition, which could be identified by FE-SEM.

• Applied Microscopy
• /
• v.15 no.1
• /
• pp.31-58
• /
• 1985

The morphological study on different types of cells of reproductive organ including spermatogenesis in the adult planaria was performed to observe their cytochemical and ultrastructural characteristics. 1. Spermatogenesis The circular luminated material appears immediately inside the nuclear envelope of early spermatid and is found also in the nucleus of sperm, but typical acrosomal structures cannot be observed. Approximately ten of small-sized mitochondria occur around the nucleus in the transitional phase from primary spermatocyte to secondary spermatocyte, but in sperm a long mitochondrion is closely associated with nucleus, parellel to long axis of it. The sperm has a relatively long head connected with two tails via hollow neck. 2. Reproductive organ The penis bulb and the bursa stalk were observed. (1) Penis bulb The cells constituted penis bulb are classified into six types on the basis of ultrastructure of the cells and cytochemistry of the cytoplasmic granules. 1) A-type cells: These cells exhibiting low electron density are mainly occupied by large nucleus. These cells possess two different types of granules: highly electron-dense round granules with an average size of $0.9{\mu}m$, and electron-dense granules exhibit PAS-positive reaction. 2) B-type cells contain PAS-positive granules with the size of about $0.4{\mu}m$. They are rich in free ribosomes and mitochondria. 3) C-type cells are found to be dark cells due to high electron-density. These cells are largely occupied by large nucleus. 4) D-type cells: These cells are seen as light cells which have poorly developed cell organelles. 5) E-type tells: These cells contain a large number of glycogen granules which occupy most of cell. 6) F-type cells: These arc parietal epidermal cells surrounding the genital antrum. These cells are characterized by their finger-like shapes and the presence of a number of electron-dense, irregularly-shaped structures inside cells. The relatively large electron-lucent granules can be also found. The F-type cells possess numerous microvilli on their free surfaces. (2) Bursa stalk The cells constituted bursa stalk are classified into 3 types on the basis of cell shapes and presences of electron-dense or electron-lucent granules. 7) G-type cells with a long cytoplasmic process. They have large nuclei and poorly developed cell organelles. 8) H-type cells: These cells are characterized by the presence of a long cytoplasmic process and relatively highly electron-dense cytoplasmic profile. They have poorly developed cell organelles. 9) I-type cells contain large electron-lucent granules which exhibit negative reactions with three kinds of cytochemical staining methods used in this experiment. The fine electron-dense structures can be found inside these granules.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.235-242
• /
• 2006

Liquid phase alkylation of biphenyl (BP) was studied over large pore zeolites. Selective formation of the least bulky products, 4,4'-diisopropylbiphenyl (4,4'-DIPB) occurred only in the isopropylation of BP over some large pore molecular sieves. H-mordenites (MOR) gave the highest selectivity among them. The dealumination of MOR enhanced catalytic activity and the selectivity of 4,4'-DIPB because of the decrease of coke-deposition. Non-selective catalysis occurs on external acid sites over MOR with the low $SiO_2/Al_2O_3$ ratio because severe coke-deposition deactivates the acid sites inside the pores by blocking pore openings. The selectivity of DIPB isomers was changed with reaction temperature. Selective formation of 4,4'-DIPB was observed at moderate temperatures such as $250^{\circ}C$, whereas the decrease of the selectivity of 4,4'-DIPB occurred at higher temperatures as $300^{\circ}C$. However, 4,4'-DIPB was almost exclusive isomer in the encapsulated DIPB isomers inside the pores even at high temperatures. These decreases of the selectivity of 4,4'-DIPB are due to the isomerization of 4,4'-DIPB on the external acid sites. Some 12-membered molecular sieves, such as SSZ-24, MAPO-5 (M:Mg, Zn, Si), SSZ-31, and ZSM-12, which have straight channels, gave 4,4'-DIPB with moderate to high selectivity; however; SSZ-55, SSZ-42, and MAPO-36 (M: Mg, Zn) gave lower selectivity because of cages in 12-membered one dimensional channels. Three dimensional H-Y and Beta zeolites also yield 4,4'-DIPB in low yield because of their wide circumstances for the isopropylation of BP. The increasing the size of alkylating agent enhanced the shape-selective alkylaiton even for the zeolites, such as UTD-1. The ethylation of BP to ethylbiphenyls (EBPs) and diethylbiphenyls (DEBPs) over MOR was non-selective. The ethylation of BP to EBPs was controlled kinetically. However, there was difference in reactivity of EBPs and DEBPs for their further ethylation. 4-EBP was ethylated preferentially among the isomers, although the formation of 4,4'-DEBP was less selective. The least bulky 4-EBP and 4,4'-DEBP have the highest reactivity among EBPs and DEBPs for the ethylation to polyethylbiphenyls (PEBPs). These results show that the environments of MOR pores are too loose for shape selective formation of the least bulky isomers, 4-EBP and 4,4'-DEBP in the ethylation of BP, and that MOR pores have enough space for the further ethylation of 4,4'-DEBP.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.252-258
• /
• 1999

Tetramethyl orthosilicate (TMOS) was obtained by the direct synthesis of methanol with metallic silicon including copper compound as a catalyst and zinc compound as a promoter. The effects of the preheating temperature and the preparation method of the contact mass on TMOS synthesis were investigated. The composition effects of the contact mass which was composed of metallic silicon with copper catalyst and various metallic halide promoters including Zn, Sn or Cd compound were studied also. The best performance on TMOS synthesis was observed on a mixed bed reactor containing metallic silicon preheated with CuCl as a catalyst and $ZnCl_2$ as a promoter. When Cu/Si = 7 wt %, Zn/Cu = 7 wt % was mixed in a slurry phase and activated into contact mass at $380^{\circ}C$, the average selectivity was 87.2% in the silicon consumption of 69.2% at $220^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.46 no.6
• /
• pp.716-722
• /
• 2014

Aminopeptidase-active fractions from crude extract of the hepatopancreas of a common squid (Todarodes pacificus) were obtained using acetone (AC; 30-40%) and ammonium sulfate precipitation (AS; 60-70% saturation), anion exchange (AE-II; 0.2 M NaCl) and gel filtration chromatography (GF-I; 30-50 kDa), respectively. The debittering capacity of GF-I fraction based on the aminopeptidase activity (89.2 U/mg), recovery (56.6%) and sensory evaluation (1.0) was better than that of other fractions. Release of amino acids increased as incubation time was increased, and the bitterness of the enzyme reaction mixtures decreased. Incubation with the GF-I fraction for 24 h resulted in the hydrolysis of several peptides, as revealed by reverse-phase HPLC profiles. Peaks 3, 5 and 6 showed the decreased area (%), whereas peaks 1, 2 and 4 showed the increased area. The GF-I fractions were found to be suitable for reducing bitterness in protein hydrolysates by catalyzing the hydrolysis of bitter peptides.