• 대한환경공학회지
• /
• 제29권9호
• /
• pp.989-996
• /
• 2007

본 연구에서는 망간산화물 존재 하에서의 1-naphthol(1-NP)의 산화-결합반응을 통한 변환반응과 반응산물을 조사하였다. 변환 반응에 의해 생성된 반응산물을 대상으로 한 용매 추출과 HPLC, GC/MS, LC/MS 및 UV-Vis. 흡광특성 분석 등을 통해 반응산물의 분자 구조특성을 규명하였다. 반응 상등액에서 검출된 반응산물은 모두 1-NP에 비하여 높은 극성을 보였다. 주요 반응산물로는 1,4-naphthoquinon(1,4-NPQ)와 dimer, trimer 등의 소 중합체(oligomers)를 포함하며 특히, 용매추출$(CH_2Cl_2)$ 후 수용액에 잔류하는 친수성 형태의 반응산물은 다양한 분자량의(m/z=$400\sim2000$) 중합체로서 토양 휴믹물질(풀빅산)과 유사한 형태의 UV-Vis 흡광특성을 보였다. 또한, 비 반응성 생성물인 1,4-NPQ는 1-NP 존재 하에서 망간산화물에 의한 교차-결합(cross-coupling)을 통해 중합체로 변환될 수 있음을 확인하였다. 본 실험조건(20.5 mg/L, 1-NP, 2.5 g/L $MnO_2$, pH 5)에서 산화-결합 반응에 의한 중합체 형성으로 제거되는 1-NP의 양(mg/L)은 초기농도 대비 약 83%에 해당하며, 이들 중 약 30% 정도는 침전층에서 중류수와 메탄올$(CH_3OH)$에 의해 추출되지 않는 안정화된 형태의 불용성 중합체 생성물로 존재하였다. 이상의 결과는 망간산화물에 의한 산화-결합반응이 naphthol 오염토양의 처리에 있어서 소 중합체와 중합체 침전물로의 변환을 통한 오염 저감 및 제거 효과를 나타냄을 제시한다.

• 시멘트 심포지엄
• /
• 1호
• /
• pp.23-30
• /
• 1973

In this paper, the reaction of the formation of portland cement clinker is reviewed. 1. When the specimen is heat-treated, the glassy phase melt with increasing temperature, and the starting materials are dissolved into the melt. After the melt is saturat

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1551-1554
• /
• 2013

• Journal of Welding and Joining
• /
• 제25권3호
• /
• pp.64-71
• /
• 2007

The dissolution phenomenon of the solid phase powder and base metal by liquid phase insert metal during Transient Liquid Phase bonding using the mixed powder composed of the modified GTD111(base metal) powder and the GNi3 (Ni-l4Cr-9.5Co-3.5Al-2.5B) powder was investigated. In case of the mixed powder contains modified GTD111 powder 50wt%, all of the powder was melted by liquid phase at 1423K. At the temperature between solidus and liquidus of GNi3, liquid phase penetrated into the boundary of the modified GTD111 powder and solid particle separated from powder was melted easily because area of reaction was increased. With increasing mixing ratio of the modified GTD111, it needed the higher temperature to melt all of the modified GTD111 powder. During Transient Liquid Phase bonding using the mixed powder composed of the modified GTD111 50wt% and GNi3 50wt% as insert metal, width of the bonded interlayer was increased with increasing bonding temperature by reaction of the base metal and liquid phase in insert metal. Dissolution of the base metal and modified powder by liquid phase progressed all together and after all of the powder was melted nearly, the dissolution of the base metal occurred quickly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1873-1878
• /
• 1991

An high-speed isothermal calorimeter which can trace the progress of a liquid phase reversible reaction was constructed using analog and digital computer. By means of a set point change of the calorimeter, the thermal energy capacity and the heat of reaction in reversible reaction mixture can be measured. The heat of reaction between 2-methyl furan and maleic anhydride and the heat capacities of the adduct were 61,200 J/mol and 2.38 J/ g K, respectively. Also reaction equilibrium constant and reaction rate constants can be estimated from the response curves of the calorimeter.

• 대한금속재료학회지
• /
• 제49권10호
• /
• pp.790-796
• /
• 2011

To reduce the heat released during intermetallic reaction, Ni-50at%Al powder compact has been previously annealed at several conditions before the reaction. The effects of the pre-annealing conditions on the reaction synthesis process have been investigated. Experimental results show that the heat released during the reaction synthesis decreased proportionally with increase of the pre-annealing temperature and duration time. The reaction duration period was significantly increased when the intermetallics were formed in the powder compact during the pre-annealing. This was attributed to the fact that the reaction occurred by solid-state diffusion between the un-reacted elemental atoms and that the $NiAl_3$ phase formed predominantly during pre-annealing.

• 한국환경과학회지
• /
• 제18권2호
• /
• pp.231-238
• /
• 2009

Characteristics of the transesterification reaction between triglycerides in soy bean oil and methanol were investigated in the presence of acid catalysts. such as sulfuric acid and PTS (p-toluene sulfonic acid). Concentrations of diglyceride and monoglyceride which were intermediates in the reaction mixtures, were far below 10% of triglyceride under any reaction conditions. Thus, conversion of the reaction could be determined from the concentration of triglyceride. Dried PTS had more superior catalytic power than sulfuric acid for transesterification reaction between soy bean oil and methanol. When transesterification reaction of soy bean oil was catalyzed by 1 wt% of PTS at methanol stoichiometric mole ratio of 2 and $65^{\circ}C$, final conversion reached 95% within 48 hours. If FAME (fatty acid methyl ester) was added into reaction mixture of soy bean oil, methanol and PTS catalyst, it converted reaction mixture into homogeneous phase, and substantially increased reaction rate. When reaction mixture was freely boiling which had equal volumetric amount of FAME to soy bean oil, methanol stoichiometric mole ratio of 2 and 1 wt% of PTS, final conversion achieved value of 94% and temperature approached to $110^{\circ}C$ within 2 hours.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.873-877
• /
• 2007

In order to apply a complex multilayer chip LC filter, this study has estimated the interfacial reaction and coupling properties of dielectric materials $Pb(Fe_{1/2}Nb_{1/2})O_3$ and Ni-Zn-Cu ferrite materials through low-temperature co-sintering (LTCS). PFN powders were fabricated using double calcinated at $700^{\circ}C$ and then $850^{\circ}C$. While the perovskite phase rate was found to be 91 %, after heat treatment at $900^{\circ}C$ for 6h, the perovskite phase rate and density exhibited a value of 100 % and 7.46$g/cm^3$, respectively. The PFN/Ni-Zn-Cu ferrite, PFN/CUO (or $Pb_2Fe_2O_5$) and ferrite/CuO (or $Pb_2Fe_2O_5$) were mechanically coupled through interfacial reactions after the specimen was co-sintered at $900^{\circ}C$ for 6 h. No intermediate layer exists for the mutual coupling reaction. This result indicates the possibility of low-temperature co-sintering without any interfacial reaction layer for a multilayer chip LC filter.

• 공업화학
• /
• 제8권6호
• /
• pp.901-906
• /
• 1997

유기금속화합물인 Tetraethylorthosilicate(TEOS)를 출발원료로 기상열분해법을 이용하여 초미립 실리카분말을 제조하였다. 반응온도, 가스유량, 반응물질의 농도, 및 반응물질의 예비가열온도가 초미립 실리카분말의 입자크기 특성에 미치는 영향을 조사하였다. 반응온도가 증가할수록 또한 체류시간이 감소할수록 생성분말의 입자크기가 작아지는 것을 알 수 있었다. 반응물농도가 증가할수록 입자크기가 증가하였고, 또한 반응물질의 예비가열온도가 증가하여도 입자크기는 큰 변화가 없음을 알 수 있었다. 본 연구조건에서 제조된 초미립 실리카분말의 평균 입자크기는 30~58 nm이었다.

• 자원환경지질
• /
• 제25권3호
• /
• pp.225-232
• /
• 1992

The hydrothermal alteration is evaluated using multicomponent equilibrium calculations with the program CHILLER for the reactions between hydrothermal water and rhyolite at the temperature of $300^{\circ}C$ and pressure of 500 bars. The chemical-reaction model on the depositional processes of the sericitite confirms that the hydrothermal water-rock interaction(hydrothermal alteration) is the main mechanism of the sericitite formation. The principal change in the aqueous phase during the reaction is the pH increase. Overall trends for the major species are the increase in total molalities of K, Ca, $SiO_2$, Al, Mg, Fe, Na, and sulfide in solid phase with hydrothermal water-rhyolite reaction and the decrease of them in aqeous solution by precipitation of hydrothermal products. Quartz and sericite are the first minerals to form. The sequence of minerals to precipitate following them is chlorite, epidote, pyrite and microcline as water/rock ratio decreases. Although calculated results cannot duplicate the complexities of natural hydrothermal alteration, the calculation provides thermodynamic constraints on the natural process. The calculation results resemble those of experimental studies. Sericitite forms where pH decreases and water/rock ratio increases.