• Korean Journal of Metals and Materials
• /
• v.48 no.2
• /
• pp.109-115
• /
• 2010

In the present study, a Zr-based amorphous alloy matrix composite reinforced with tungsten porous foam was fabricated without pores or defects by liquid pressing process, and its microstructures and mechanical properties were investigated. About 69 vol.% of tungsten foam was homogeneously distributed inside the amorphous matrix, although the matrix of the composite contained a small amount of crystalline phases. The compressive test results indicate that the composite was not fractured at one time after reaching the maximum compressive strength, but showed considerable plastic strain as the compressive load was sustained by tungsten foam. The tungsten foam greatly improved the strength (2764 MPa) and ductility (39.4%) of the composite by homogeneously dispersing the stress applied to the matrix. This was because the tungsten foam and matrix were simultaneously deformed without showing anisotropic deformation due to the excellent bonding of tungsten/matrix interfaces. These findings suggest that the liquid pressing process is useful for the development of amorphous matrix composites with improved strength and ductility.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.177-184
• /
• 2021

This paper proposes an assessment method using probability-based index for safe and successful underwater docking of autonomous underwater vehicles(AUVs) to the docking stations(DSs). The proposed method assesses the probability of docking according to the degree to which the state of the AUV is consistent with the state criteria for docking. The assessment is performed within a specific area considering the kinematic constraints and docking plans of the AUV. The assessment process is defining probability density function, calculating probabilities for reaching the docking station according to the difference to position and heading criteria, and computing the probability-based index in real-time. We verify the validity of the proposed method through analyzing the data acquired on operation test.

• Journal of Preventive Medicine and Public Health
• /
• v.54 no.1
• /
• pp.17-21
• /
• 2021

In 2020, the coronavirus disease 2019 (COVID-19) pandemic has caused unprecedented disruptions to global health systems. The Korea has taken full-fledged actions against this novel infectious disease, swiftly implementing a testing-tracing-treatment strategy. New obligations have therefore been given to the Health Insurance Review and Assessment Service (HIRA) to devote the utmost effort towards tackling this global health crisis. Thanks to the universal national health insurance and state-of-the-art information communications technology (ICT) of the Korea, HIRA has conducted far-reaching countermeasures to detect and treat cases early, prevent the spread of COVID-19, respond quickly to surging demand for the healthcare services, and translate evidence into policy. Three main factors have enabled HIRA to undertake pandemic control preemptively and systematically: nationwide data aggregated from all healthcare providers and patients, pre-existing ICT network systems, and real-time data exchanges. HIRA has maximized the use of data and pre-existing network systems to conduct rapid and responsive measures in a centralized way, both of which have been the most critical tactics and strategies used by the Korean healthcare system. In the face of new obligations, our promise is to strive for a more responsive and resilient health system during this prolonged crisis.

• Journal of Preventive Medicine and Public Health
• /
• v.54 no.2
• /
• pp.119-128
• /
• 2021

Objectives: Ongoing, proactive, planned, and patient-centered diabetes education is the cornerstone of care for all persons with diabetes. Thus, the aim of this study was to explore the information needs of type 2 diabetes mellitus patients receiving insulin treatment in North-East Ethiopia. Methods: The study was conducted from July 2019 to January 2020 using a qualitative enquiry (phenomenological approach) with purposive sampling. Face-to-face in-depth interviews were used to collect data until reaching theoretical saturation. The participants were type 2 diabetes patients receiving insulin treatment. They were identified from the diabetes patients' registration book at the diabetes clinic and interviewed at their appointment time, and were selected to include wide variations in terms of socio-demographic characteristics. Twenty-four participants (11 men and 13 women), with a median age of 57 years, were interviewed. The data were organized using QDA Miner Lite version 2.0.7 and analyzed thematically using narrative strategies. Results: Most participants had not heard of diabetes before their diagnosis. They had limited knowledge of diabetes, but ascribed different connotations for it in the local language (Amharic). The needs reflections of patients were categorized into diabetes education and participants' recommendations. Diabetes education was totally absent at hospitals, and patients received education primarily from the Ethiopian Diabetes Association and broadcast and digital media. Thus, the major concern of patients was the availability of diabetes education programs at health institutions. Conclusions: Patients' main concern was the absence of routine diabetes education, which necessitates urgent action to implement diabetes education programs, especially at health institutions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.4
• /
• pp.487-494
• /
• 2022

With the recent demand for analysis using data, the size of the knowledge graph, which is the data to be analyzed, gradually increased, reaching about 82 billion edges when extracted from the web as a knowledge graph. A lot of knowledge graphs are represented in the form of Resource Description Framework (RDF), which is a standard of W3C for representing metadata for web resources. Because of the characteristics of RDF, existing RDF storages have the limitations of processing time overhead when converting and storing large amounts of RDF data. To resolve these limitations, in this paper, we propose a method of compressing and converting large amounts of RDF data into integer IDs using MapReduce, and vertically partitioning and storing them. Our proposed method demonstrated a high performance improvement of up to 25.2 times compared to RDF-3X and up to 3.7 times compared to H2RDF+.

• 한국노년학
• /
• v.40 no.4
• /
• pp.761-779
• /
• 2020

This study is a qualitative study applied with in-depth interviews and phenomenological analysis. The objective of this study was finding out the function of the elder protection agency by interpreting the meaning developed from the experience of the workers about the role of the elder protective service agency. As a result of the analysis, the essential themes were 'Struggling and working hard', 'Obstacles that cannot be lifted', and 'Reaching the time to be reborn as an organization for the elderly human rights.' The common essence of these themes is 'The road to human rights orientation: a destination that must be reached, though not easy to go.' In order for the meanings to be settled and to fit in to the community, it was suggested it is a situation in which both internal and external renewal of the institution for the protection of the elderly is most needed. In addition, much as it turned out that legal and institutional support must be provided so that the elder protection agency can be reborn as human rights organizations with more professionalism, it was proposed to follow the institutional improvement plan derived from this study.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.2
• /
• pp.1-13
• /
• 2022

Agrivoltaic facility is the composite system that the solar panel is installed above the farmland, and it enables crop and electricity production simultaneously. Solar panels of the agrivoltaic facilities can block and reduce the amount of solar irradiance arriving at the farmland, but it can help the crop growth by preventing excessive solar irradiance. Therefore, to clarify how the agrivoltaic facilities affect the crop growth, precise solar irradiance distribution under the solar panel should be modeled. In this study, PAR (photosynthetically active radiation), radiation from 400 to 700 nm, which crops usually use to grow, was extracted from the total irradiance and its distribution model under various conditions was developed. Monthly irradiance distributions varied because the elevation of the sun was changed over time, which made the position changed that the local maximum and minimum irradiance appear. The higher panel height did not cause any significant difference in the amount of irradiance reaching below the solar panel, but its distribution became more uniform. Furthermore, the panel angles with the most irradiance arriving below the solar panel were different by month, but its difference was up to 2%p between the irradiance with 30° angle which is usually recommended in Korea. Finally, the interval between panels was adjusted; when the ratio of the length of the panel to the empty space was 1:2, the irradiance of 0.719 times was reached compared to when there was no panel, 0.579 times for 1:1 and 0.442 times for 2:1.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.68-68
• /
• 2001

Thin films of polycrystalline silicon (poly-Si) is a promising material for use in large-area electronic devices. Especially, the poly-Si can be used in high resolution and integrated active-matrix liquid-crystal displays (AMLCDs) and active matrix organic light-emitting diodes (AMOLEDs) because of its high mobility compared to hydrogenated _amorphous silicon (a-Si:H). A number of techniques have been proposed during the past several years to achieve poly-Si on large-area glass substrate. However, the conventional method for fabrication of poly-Si could not apply for glass instead of wafer or quartz substrate. Because the conventional method, low pressure chemical vapor deposition (LPCVD) has a high deposition temperature ($600^{\circ}C-1000^{\circ}C$) and solid phase crystallization (SPC) has a high annealing temperature ($600^{\circ}C-700^{\circ}C$). And also these are required time-consuming processes, which are too long to prevent the thermal damage of corning glass such as bending and fracture. The deposition of silicon thin films on low-cost foreign substrates has recently become a major objective in the search for processes having energy consumption and reaching a better cost evaluation. Hence, combining inexpensive deposition techniques with the growth of crystalline silicon seems to be a straightforward way of ensuring reduced production costs of large-area electronic devices. We have deposited crystalline poly-Si thin films on soda -lime glass and SiOz glass substrate as deposited by PVD at low substrate temperature using high power, magnetron sputtering method. The epitaxial orientation, microstructual characteristics and surface properties of the films were analyzed by TEM, XRD, and AFM. For the electrical characterization of these films, its properties were obtained from the Hall effect measurement by the Van der Pauw measurement.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.110-110
• /
• 2003

The high incidence of polyspermic fertilization is one of the major causes lowering the overall efficiency of porcine IVF. The common procedure for IVF involves the co-culture of both gametes in the medium drop, which increases sperm concentration and incidence of polyspermy. Therefore, the present study was carried out to increase the efficiency of porcine IVF by reducing polyspermy using a modified swim-up method. This method modifies conventional swim-up washing by placing oocytes directly at the time of washing. Sperm pellet was prepared in the tube and mature oocytes were placed on cell strainer with $70 \mu m$ pore size (Falcon 2350) at the top of the tube. After insemination, the oocytes were stained for examination. Also, the developmental potential of fertilized embryos was measured to evaluate for the feasibility of this method. While having similar penetration rates in both methods ($86.67 \pm 2.36% to 83.33 \pm 1.36%$), there was a significant reduction of polyspermy in modified swim-up method ($17.50 \pm 1.60%$) compare to the control ($44.1 \pm 3.70%$ (p<0.05). Subsequent culture showed higher rate of blastocyst formation in modified swim-up method (20.44$\pm$0.99%) than the control ($15.73 \pm 3.26%$) (P<0.05), even though there was no significant difference. These results suggest that, by controlling the number of spermatozoa reaching the oocytes, porcine oocytes might be protected from polyspermy in vitro. Also, the developmental potential of the fertilized embryos using this method could be improved by increasing the pool of spermatozoa with better quality. Further optimization of the procedure required to implicate this method in routine porcine IVF.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.3
• /
• pp.207-221
• /
• 2023

The increasing demand for clean energy requires considerable effort to find alternative energy sources, such as briquettes. This research aims to develop a charcoal briquette with added pine resin (API) that has excellent combustion speed and distinctive aroma. Briquettes are composed of charcoal, pine resin (concentration: 0%-30%), and starch (up to 7%). They are produced in several stages, including coconut shell pyrolysis in conventional combustion, to obtain charcoal for the briquette precursor. Briquette compaction is conducted by mixing and densifying the charcoal, pine resin, and starch using a hydraulic press for 3 min. The hydraulic press has a total surface area and diameter of 57.7 cm² and 3.5 cm, respectively. The briquettes are dried at different temperatures, reaching 70℃ for 24 h. The study results show that the briquettes have a thickness and diameter of up to 2 and 3.5 cm, respectively; moisture of 2.18%-2.62%; ash of 11.61%-13.98%; volatile matter of 27.15%-51.74%; and fixed carbon content of 40.24%-59.46%. The compressive strength of the briquettes is 186-540 kg/cm². Their calorific value is 5,338-6,120 kcal/kg, combusting at a high speed of 0.15-0.40 s. The methoxy naphthalene, phenol, benzopyrrole, and lauryl alcohol; ocimene, valencene, and cembrene are found in the API. The API briquette has several chemical compounds, such as musk ambrette, ocimene, sabinene, limonene, 1-(p-cumenyl) adamantane, butane, and propanal, which improve aroma, drug application, and fuel production. Accordingly, API briquettes have considerable potential as an alternative energy source and a health improvement product.