• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.492-500
• /
• 2004

The purpose of this study is localization of safety relief valves fur Nuclear Service through technical development with overall design, fabrication, inspection, capacity certification test and functional qualification test of safety relief valves in accordance with KEPIC MN Code(or ASME Sec.III ). The safely relief valve is the important equipment used to protect the pressure vessel, the steam generator and the other pressure facility from overpressure by discharging the operating medium when the pressure of system is reaching the design pressure of the system. But we're depending on technology of the other country up to the present time. Because we don't have our own technologies, we have been spent the great time and money on installing and repairing safety relief valve at nuclear power plant. Therefore we have to achieve the development of safety relief valves for Nuclear Service with our own technologies.

• Journal of Powder Materials
• /
• v.6 no.1
• /
• pp.49-55
• /
• 1999

Al-Cr-Zr nanocomposite metal powders were prepared by mechnical alloying (MA) in order to develop aircraft structure materials with lighter weight and lower cost than the conventional Ti and Ni alloys. The morphological changes and microstrutural evolution of Al-6wt.%Cr-3wt.%Zr nanocomposite metal powders during MA were investigated by SEM, XRD and TEM. The approximately 50$\mu$m sized Al-Cr-Zr nanocomposite metal powders has been formed after 20 h of MA. The individual X-ray diffraction peaks of Al, Cr and Zr were broadened and peak intensitied were decreased as a function of MA time. The observed Al crystallite size by TEM was in the range of 20 nm, which is a simliar value calculated by Scherrer equation. The microhardness of Al-Cr-Zr nanocomposite metal powders increases alomost linearly with increase of the processing time, reaching a saturation hardness value of 127 kg/$mm^2$ after 20 h of processing. The intermetallic compound phase of $Al_3Zr_4$ in the matrix was identifed by XRD and TEM.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.44-45
• /
• 2014

On this study, initial crack index was evaluated by performing FEM analysis to crack propagation from hydration heat for development of precast concrete. On the result, as increased the usage of hardening accelerator, initial compressive strength were improved and setting time also was shortened. Additionally, central temperature of concrete was increased, the reaching time for the highest temperature could be shortened. By the result to assess crack index, there was no problem about crack despite of growth of initial high hydration heating. This result guessed because of small size element when analyzed trough FEM, realization for mass concrete's crack index should be performed.

• Journal of East-Asian Urban History
• /
• v.1
• /
• pp.55-80
• /
• 2019

The New Culture Movement marked the dawning of a turbulent era in China. By the time of May Fourth Movement, the cultural contradiction and confliction grew into an extensive and enduring social movement extending deep and far-reaching influence on the Chinese society. The huge difference and contradiction existing between the Beijing and Shanghai cultures contributed to the outbreak of this social movement. To be specific, there was an active human and information exchange involving the two leading Chinese cities and at the same time the old and new cultures, thoughts and moralities constantly acted upon each other.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.61.4-61.4
• /
• 2019

The key science goal of the KMTNet Supernova Program (KSP) is to detect and study the early explosions of supernovae using one fifth of the KMTNet time. The BVI-band observations of the nearby target fields mostly closer than 30 Mpc distance and the follow-up spectroscopy provide valuable information on the early phase of the supernovae. These data can also be used for the studies of optical transients such as novae, dwarf novae, variable stars, and active galactic nuclei. Stacked images of several hundred images obtained from the time domain observations can be used for the search of low surface brightness galaxies reaching $28mag\;arcsec^{-2}$. Results and status of the KSP including ${\geq}20$ infant supernovae and ${\geq}100$ faint dwarf galaxies will be presented in this talk.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.142-142
• /
• 1998

This study has been undertaken to examine the effect of biphenyl dimethyl dicarboxylate (DDB) on rat liver drug metabolizing enzyme in order to understand the mechanism of DDB on improving hepatic toxicity in rat liver. After DDB was administered into male rats for different periods of time, mRNA level of CYP1A1 and CYP2B1 was measured by polymerase chain reaction (PCR). DDB treatment resulted in increase in CYP2B1 mRNA level whereas there was no change in CYP1A1 mRNA level. This effect of DDB was time dependent reaching maximal level by 2-day treatment. DDB dose response study showed that 50mg/kg DDB induced CYP2B1 mRNA to maximal level and DDB icreased CYP2B1 gene expression with dose-dependent manner. Based on studies of lipid peroxidation, serum ALT and AST levels and histopathologic examination showed DDB protection on CCl4 induced hepatotoxiccity.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.1055-1063
• /
• 1990

The early hydration characteristics of the system $C_3S-C_3A-C_4AF$ according to the clinker composition variations, in order to establish the mutual interactionof clinker minerals during the portland cement hydration, have been studied. The early hydration rate of $C_3S$ was greatly effected by the change of $C_3S/C_3A$ ratio. The lower the $C_3S/C_3A$ ratio was, the faster the apex reaching time and the rate of heat liberation of the 2nd exothermic peak originating from the formation of $Ca(OH)_2$ were. The effect of $C_3S/C_3A$ ration on the amounts of $Ca(OH)_2$ formation was decreased, in process of hydration time, but the effect of $C_3S$ content was increased.

• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.141-147
• /
• 2016

Staphylococcus aureus cultures exposed to rotating magnetic field (RMF) were studied in order to analyse the possible induced changes in staphylococcal enterotoxin genes (se) expression. Liquid cultures of S. aureus strains carrying different se were exposed to the RMF of magnetic frequency 50 Hz and magnetic induction 34 mT for 10 h at $37^{\circ}C$. Three time points of bacterial growth cycle were considered for RNA extractions. Gene expression analyses were evaluated using real-time quantitative PCR method. The present study confirmed, that the RMF can stimulate the growth rate of S. aureus cultures in comparison to the unexposed controls, while the stimulation is not strain dependent. The studies have also shown, that the RMF, depending on the exposure time but regardless the bacterial strain, can influence on the expression of various se. In general, except for sea, as a result of bacterial exposure to the RMF through subsequent growth phases, the expression of se decreased, reaching the values below results recorded for unexposed controls. In the case of sea expression remained at a lower level as compared to the control, regardless the time of exposition.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.650-657
• /
• 2020

Purpose: In this study, the effectiveness of pilot project of PLSP (Priority Lane and Signal Preference) system, which was operated in Cheongju City, was analyzed. Method: The priority signal was operated by a police officer switching to a blue signal when approaching a fire truck through CCTV, and the priority lane of emergency vehicles was displayed on the road to enable preferential traffic. VISSIM simulation analysis was performed for the 1.2km section (3.8km) of the pilot project section and vehicle data was analyzed for some of the test operation sections. Result: Simulation analysis shows that the moving speed of the emergency vehicle can be increased by 42 km/h with the introduction of PLSP, which can be increased by approximately twice the speed. Travel time was reduced by about 3 minutes, and considerable improvements of 69% compared to cities that are not operating was analyzed. The pilot operation of Cheongju City showed a time-shortening effect of about two minutes on average, with the average time reaching 4 minutes and 14 seconds in the first period and the average time reaching 5 minutes and 40 seconds in the second period. Conclusion: The system has been shown to be effective in minimizing time-to-site arrival of emergency vehicles.

• Journal of Multimedia Information System
• /
• v.4 no.4
• /
• pp.179-188
• /
• 2017

The Internet Video Coding (IVC) standard is due to be published by Moving Picture Experts Group (MPEG) for various Internet applications such as internet broadcast streaming. IVC aims at three things fundamentally: 1) forming IVC patents under a free of charge license, 2) reaching comparable compression performance to AVC/H.264 constrained Baseline Profile (cBP), and 3) maintaining computational complexity for feasible implementation of real-time encoding and decoding. MPEG experts have worked diligently on the intellectual property rights issues for IVC, and they reported that IVC already achieved the second goal (compression performance) and even showed comparable performance to even AVC/H.264 High Profile (HP). For the complexity issue, however, there has not been thorough analysis on IVC decoder. In this paper, we analyze the IVC decoder in view of the time complexity by evaluating running time. Through the experimental results, IVC is 3.6 times and 3.1 times more complex than AVC/H.264 cBP under constrained set (CS) 1 and CS2, respectively. Compared to AVC/H.264 HP, IVC is 2.8 times and 2.9 times slower in decoding time under CS1 and CS2, respectively. The most critical tool to be improved for lightweight IVC decoder is motion compensation process containing a resolution-adaptive interpolation filtering process.