• Korean Journal of Metals and Materials
• /
• v.49 no.6
• /
• pp.440-447
• /
• 2011

To improving the mechanical properties of Mg alloys at high temperature, we investigated the mechanical properties at high temperature and the change of microstructure of Mg-6 wt%Zn-0.4 wt%Mn and Mg-6 wt%Zn-0.4 wt%Mn-1 wt%Ag alloys on age treatment that have a stable MgZn phase at high temperature and $AgMg_4$ improving yield stress. In order to predict thermodynamic data of Mg alloys, a phase diagram and precipitation phase were calculated using a thermodynamic program, and it was confirmed that the MgZn and $AgMg_4$ phase existed as main precipitation in this alloys. The experimental data examined using DSC and XRD were comparable with the calculated data for reliability. In order to analysis the microstructure and precipitate phase during aging treatment, it was measured by SEM/EDS and TEM. Lastly, mechanical properties of the MgZn and $AgMg_4$ phase were measured by a tensile test at high temperature.

• 한국해양학회지
• /
• v.11 no.2
• /
• pp.64-70
• /
• 1976

Forty four dredged surface sediments from the bottom of the Hwajinpo Lake and its vicinity were investigated in terms of the sedimentary depositional environment. The characteristics of the sedimentary textures, chemistry and clay mineralogy of these sediments were analysed by X-ray diffraction, chemical (EDTA titration and atomic absorption), sieving and pipette techniques. The lake sediments were chiefly mud and the beach sediments were sand. However, the lake sediments from its seaward zone were sand or muddy sand. The textural parameters that is, mean size, sorting value and their pair diagram seems to be characteristic in the area studied. Based on these data it seems to be reasonable thatthe Hwajinpo Lake was developed by the accretion and growth of a barrier spit along the shore investigated. The chief clay minerals identified were kaolinite, muscovite and the presence of vermiculite was believed as minor composition. The major chemical compositions of these sediments, that is, SiO$\sub$2/, Al$\sub$2/O$\sub$3/, Fe$\sub$2/O$\sub$3/, CaO, Na$\sub$2/O and K$\sub$2/O were contained in unit sample. The ratio of alumina to sodium oxide as a chemical index seems to indicate that the inner lake sediments are more mature than the outer one.

• Journal of Conservation Science
• /
• v.9 no.1
• /
• pp.11-20
• /
• 2000

The body composition of an ancient roofing tiles excavated from Chonnam province has been investigated by X-ray diffraction, and inductively coupled plasma spectroscopy. Ancient roofing tiles were excavated at ancient mountain fortress and kiln sites. The body composition of roofing tiles was different according to the excavated sites. The mineral component of roofing tiles were grouped in the five types and chemical composition was different according to the excavated areas. It is presumed that the body of roofing tiles used low-grade raw materials containing $Fe_2O_3$ 4-10%. The trace element composition of the roofing tiles were different, and it might be all ret1ection of different geological characteristics. The characteristic element of rooting tiles was vanadium element of the analyzed 20 trace elements. By $SiO_2-V$ distribution diagram types, roofing tiles excavated from the Geomdan mountain fortress at Sunchon, kiln site in Yeochon, Gorak and Cheoksan mountain fortress at Yeosu were grouped into the same excavated site.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.161-169
• /
• 2002

high pressure and temperature conditions. However, those results are not consistent with one another, and phase boundary between ilmenite and perovskite phases determined only from the quenching method may be not so reliable at all. Therefore, in-situ high pressure-temperature (hP-T) X-ray diffraction measurements were performed up to 19 GPa and $700^{\circ}C$ in a large volume press apparatus using synchrotron radiation. Experimental results show that perovskite phase is stable at pressures above 16 GPa, and transforms back to $LiNbO_3$phase near 15 CPa at room temperature, and that the perovskite-ilmenite transition is back and forth near 15 CPa at $500^{\circ}C$. LiNbO$_3$phase transforms to ilmenite at 13 CPa and $300^{\circ}C$ and at 10.8 CPa and $400^{\circ}C$, respectively. These data indicate that $LiNbO_3$phase may have a stability region in the hP-T phase diagram and that the perovskite-ilmenite phase boundary would be quite different from that previously reported.

• Journal of Aerospace System Engineering
• /
• v.10 no.4
• /
• pp.17-25
• /
• 2016

In this study, an optical system for a lens-shifting method that compensates for microvibration of a high-agility small satellite has been designed. The lens-shifting method is an image-stabilization technique that can be applied to compensate for the optical path disturbed by microvibration. The target optical system is designed by using Code-V, a commercial optical-design code. The specifications for real satellite cameras have established the requirements for optical design. The Ray aberration curve, spot diagram, and MTF curve were carried out to verify if the designed optical system meets the requirements or not. The designed Schmidt-Cassegrain optical system with field flattener and a vibration-reduction lens has been verified to meet the optical requirements, 33% of MTF at Nyquist frequency, GSD of 2.87 m, and vibration coefficient of 0.95~1.0.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.112-124
• /
• 1989

In order to evaluate imaging performance of newly developed digital radiography system which requires scanning time as short as 0.7 sec and patient exposure as low as 3 mR, we have investigated its imaging and physical properties such as sensitivity characteristic, scatter fraction, detective quantum efficiency, modulation transfer function, and contrast detail diagram. The results show that the digital radiography system has linear sensitivity to the incident energy, and superior contrast resolving power with less X-ray exposure than conventional film-screen system. These performances are resulted from excellent scatter rejection capability and high detective quantum efficiency of digital radiography system.

• Applied Chemistry for Engineering
• /
• v.2 no.2
• /
• pp.185-191
• /
• 1991

The chemical composition and characteristics of the source rock collected from Dolgorae-1 well in Korea continental shelf block VI( $35^{\circ}$ 18'N.L., $130^{\circ}$ 28'E) have been investigated. An oil show analyzer(OSA) has been used to determine the contents of gas, oil and total organic carbon(TOC). The average TOC value for the sample is found to be 0.59%. The OSA has also provided hydrogen index and $T_{max}$, the maximum temperature which generate maximum hydrocarbons from kerogen. From a $T_{max}$-hydrogen index diagram the type of organic matter in the source rock was estimated to be type III kerogen. The content of bitumen and its molecular weight have been determined by means of extraction method and gel permeation chromatograph, respectively. The physicochemical properties has been studied using X-ray diffraction spectrometer, IR spectrometer and thermogravimetric method. On the basis of the results obtained in the present work, the samples collected from Dolgorae-1 well are evaluated to be poor source rocks.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.560-567
• /
• 1995

Interfacial reactions, phase equilibria and elecrrical properties of Co films on (001) oreinted GaAs substrate, in the temperature range 300-$700^{\circ}C$ for 30min. have been investigated using x-ray diffraction and Augger electron spectropcopy. Cobalt started to react with GaAs at 38$0^{\circ}C$ by formation of Co$_{2}$GaAs phase. At 42$0^{\circ}C$, CoGa and CpAs nucleated at the Co and Co$_{2}$GaAs interface and grew with Co$_{2}$GaAs upto 46$0^{\circ}C$. contacts produced in this annealing regime were rectifying and Schottky varrier heights increased from 0.688eV(as-deposite state) up to 0.72eV(42$0^{\circ}C$). In the subsequent reation, the ternary phase started to decompose and lost stoichiometry at 50$0^{\circ}C$. At higher temperature, Co$_{2}$GaAs disappered and CoGa/CoAs/GaAs layer structures were formed. Contacts produced at higher temperature regime(>50$0^{\circ}C$) showed very low effective barriers. The results of interfacial reactions can be understood from the Co-Ga-As ternary phase diagram.

• Journal of Magnetics
• /
• v.6 no.4
• /
• pp.122-125
• /
• 2001

Phase relationships of the HDDR (hydrogenation, disproportionation, desorption and recombination)-treated Sm$_3$(Fe,M)$_{29}$-type alloy with chemical composition of Sm$_{9}$Fe$_{65}$ $Co_{20}$V$_{6}$ were studied by X-ray diffraction (XRD) and by thermomagnetic analysis (TMA). The alloy was disproportionated into a mixture of $SmH_{x}$ and $\alpha$-Fe at high temperature under hydrogen gas. The disproportionated material was recombined into a mixture of Sm-(Fe,M) (M = Co and/or V) and $\alpha$-Fe phases. The structure of the Sm-(Fe,M) phase was dependent upon the recombination conditions, and a detailed phase diagram showing the phase relationships in the HDDR-treated alloy has been established. The Sm-(Fe,M) phase in material recombined above $900^{\circ}C$ had the $Sm_2Fe_{17}$-type structure, and it exhibited the $SmFe_{7}$-type structure when recombined at temperatures ranging from $700^{\circ}C$ to $850^{\circ}C$. Recombination below $650^{\circ}C$ led to the $SmFe_3$-type structure of the Sm-(Fe,M) phase. Curie temperatures of the Sm-(Fe,M) phases in the recombined material were significantly higher than those of the corresponding stoichiometric phases. It was suggested that the chemical composition of the Sm-(Fe,M) phases may be significantly different from that of the corresponding stoichiometric phases. All the HDDR-treated $Sm_{9}Fe_{65}Co_{20}V_{6}$ materials showed the soft magnetic features regardless of the phase constitution.n.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.113-119
• /
• 2006

We need a good image of the retina of the human eye in order to inspect or cure it. In this work, an optical system design for a retinal camera is studied and the finite schematic eye model made by Sang Gee Kim and Sung Chan Park is used. The optical system is composed of four lens groups. The rays of the entire object field are collected on the center by the 1st group and the objective is imaged by all the other groups. The image is detected by the CCD array and displayed by a monitor The 1st lens group is employed singlet and other groups are employed triplets. Ray aberrations, spot diagrams, diffraction line spread functions and MTFs are calculated for optical performance assessment. This design may be very useful for the development of a retinal camera with high performance.