• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.5
• /
• pp.297-304
• /
• 2015

A multilayer gaseous detector has been developed for fast dose-verification measurements of raster-scan-mode therapeutic beams in particle therapy. The detector, which was constructed with eight thin parallel-plate ionization chambers (PPICs) and polymethyl methacrylate (PMMA) absorber plates, is closely tissue-equivalent in a beam's eye view. The gas-electron signals, collected on the strips and pad arrays of each PPIC, were amplified and processed with a continuous charge.integration mode. The detector was tested with 190-MeV raster-scan-mode beams that were provided by the Proton Therapy Facility at Samsung Medical Center, Seoul, South Korea. The detector responses of the PPICs for a 190-MeV raster-scan-mode proton beam agreed well with the dose data, measured using a 2D ionization chamber array (Octavius model, PTW). Furthermore, in this study it was confirmed that the detector simultaneously tracked the doses induced at the PPICs by the fast-oscillating beam, with a scanning speed of 2 m s-1. Thus, it is anticipated that the present detector, composed of thin PPICs and operating in charge.integration mode, will allow medical scientists to perform reliable fast dose-verification measurements for typical dynamic mode therapeutic beams.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5C
• /
• pp.490-496
• /
• 2006

H.264 is the most recent video coding standard, containing improved error resilience tools than previous video compression schemes. This paper shows an analysis of the dependency of error concealment (EC) performance on the expected number of correctly received neighboring macroblock(MB)s for a lost MB, applying error concealment schemes to the raster scan mode that is used in the previous video coding standard and the flexible macroblock ordering (FMO) which is one of error-resilience tools in H.264. We also present simulation results and performance evaluation with various packet loss rates. Simulation results show that the FMO mode provides better EC performances of $1{\sim}9dB$ PSNR improvements compared to the raster scan mode because of larger expected number of correctly received neighboring MBs. The PSNR improvement by FMO mode becomes higher as the intra-frame period is larger and the packet loss rate is higher.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.365-366
• /
• 2008

• Journal of Biomedical Engineering Research
• /
• v.17 no.4
• /
• pp.469-478
• /
• 1996

In the conventional digital ultrasound scanner, the reflected signal is sampled either in polar coordinates of R-$\theta$ method, or in Cartesian coordinates of uniform ladder algorithm (ULA). The R-$\theta$ scan method necessitates a coordinate transform process which makes hardware complex in comparison with ULA scan mrthoA In spite of this complexity, R-$\theta$ method has a good resolution in ultrasonographic (US) image, since scan direction of the US imaging is a radial direction. In this paper, a new digital scan converter is proposed, which is named the radius uniform ladder algorithm (RULA). The RULA has the rome scan direction as the US scanning in the radial direction and as the display space in the $\theta$ direction. In tllis new approach, sampled points we uniformly distributed in each horizontal line i.n well as in each radial ray so that the data are displayed in the Cartesian coordinates by the 1-D interpolation process. The propped algorithm has an uniform resolution in the periphery and the center field in comparison with equi-angle ULA and equi-interval ULA. To extend the scan angle, concentric square raster sampling (CSRS) is adopted with reduction of discontinuities on the junctions between horizontal scan and vertical scan. The discontinuities are reduced by using the hmction filtering along the $\theta$ direction.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1492-1494
• /
• 1987

This paper describes a hardware architecture called Edge Painting Machine for real time generation of scan line images for raster scan graphics display. The Edge Painting Machine consists of Scanline Processor which converts polygon data sorted in their depth priority into a set of scan line commands for each scan line, and Edge Painting Tree which converts the scanline commands set into a raster line image. Edge painting tree has been designed using combinational logic circuit. The designed circuit has been simulated to verify the proper functioning. A salient feature of the EPT is that hardware composition is simple, because each processor is constituted by only combinational logic circuit.

• Proceedings of the KIEE Conference
• /
• 1979.08a
• /
• pp.76-79
• /
• 1979

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.10 no.2
• /
• pp.37-44
• /
• 1992

Although scanners are much more expensive than other input devices expect for some low quality devices, raster scanner and vectorizing softwares have been used and will be used as a means for the data entry in GIS. In this study, the accuracy of raster data and vectorizing in data entry by scanning technology, the coverage generation are investigated. As a result, the deterioration of spatial resolution can be improved by using the histogram analysis and the line enhancement when we scan a map at a lower dpi. It is to be desired that a raster scanner dpi is selected 150 dpi or 200 dpi among five densities (75 dpi, 150, dpi, 200 dpi, 300 dpi, 400 dpi) in view of the storage of raster data and the RMSE of coverage generation. Also, it was very important role of the choice of trace parameters to trace raster data in the vectorizing procedure.

• Journal of Broadcast Engineering
• /
• v.11 no.3 s.32
• /
• pp.320-325
• /
• 2006

An image is partitioned into non-overlapping $8{\times}8$ blocks fer JPEG compression. A scan order converter is placed before the JPEG encoder to provide $8{\times}8$ blocks from the pixels in raster scan order. In general, its architecture requires two line memories for storing eight lines separately to allow the concurrent memory access by both the camera and JPEG processors. Although such architecture is simple to be implemented, it can be inefficient due to too excessive memory requirement as the image resolution increases. However, no deterministic addressing equation has been developed for scan conversion. In this paper, an effective memory addressing algorithm is proposed that can be devised only by adders and subtracters to implement a scan converter based on the single line memory.

• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.55-61
• /
• 2023

With femtosecond (fs) laser pulse irradiation on metals, various types of nano- and micro-scale structures can be naturally induced at the surface through laser-matter interaction. Two notable structures are laser-induced periodic surface structures (LIPSSs) and cone/spike structures, which are known to significantly modify the optical and physical properties of metal surfaces. In this work, we irradiate fs laser pulses onto various types of metals, cold-rolled steel, pickled & oiled steel, Fe-18Cr-8Ni alloy, Zn-Mg-Al alloy coated steel, and pure Cu which can be useful for precise molding and imprinting processes, and adjust the morphological profiles of LIPSSs and cone/spike structures for clear structural coloration and a larger range of surface wettability control, respectively, by changing the fluence of laser and the speed of raster scan. The periods of LIPSSs on metals used in our experiments are nearly independent of laser fluence. Accordingly, the structural coloration of the surface with LIPSSs can be optimized with the morphological profile of LIPSSs, controlled only by the speed of the raster scan once the laser fluence is determined for each metal sample. However, different from LIPSSs, we demonstrate that the morphological profiles of the cone/spike structures, including their size, shape, and density, can be manipulated with both the laser fluence and the raster scan speed to increase a change in the contact angle. By injection molding and imprinting processes, it is expected that fs laser-induced surface structures on metals can be replicated to the plastic surfaces and potentially beneficial to control the optical and wetting properties of the surface of injection molded and imprinted products.

• Journal of Broadcast Engineering
• /
• v.2 no.1
• /
• pp.36-44
• /
• 1997

We propose 3D perspective display using elevation matrix data with 2D information overlay. This algorithm is based on ID scan-line method and we used color index of the newly developed raster map, VRRG(Vector Restored Raster Graphics). The proposed method allows the fast generation of perspective view of 3D data with 2D overlay and the fast selective display of the features of 2D overlay.