• Journal of Korea Multimedia Society
• /
• v.6 no.4
• /
• pp.714-722
• /
• 2003

Men's clothing has been recently giving higher market shares to the ready-made clothes rather than the custom-tailored clothes. With many active studies on the human body and design, the ready-made clothes win popularity due to their rapid repairing, various design, and cheap prices, though they are not perfect suitable for some people. Therefore the ready-made has a weak point unable to consider all of the individual physical characteristics. However the custom-tailored clothes ate able to make clothing perfectly suitable lot their customers, though they require longer time-taking and expensive costs. In this context, this paper is design and implementation an automatic design edit system to provide a rapid and cheap service for customers on the ground of the custom-tailored clothes. In other words, this paper intended to use computer systems lot rapidly and precisely providing design dependent on the individual physical characteristics including a distorted bodies, types of the leg, and a height of the shoulder. To do so, the paper using not only studies on the human body and the custom-tailored clothes but also technical know-hows planned design for each individual body by LISP language and automatically process the design through CAD system. Consequently, the rapid and precise processing has reduced inventories and production costs, leading to supplying high quality clothes at lower prices.

• Journal of the Korean Ceramic Society
• /
• v.32 no.8
• /
• pp.881-892
• /
• 1995

Sol-Gel derived ferroelectric PZT thin films were fabricated on ITO/Glass substrate. Two kinds of rapid thermal annealing methods, R-I (six times of intermediate and final annealing) and R-II (one final annealing after six times of intermediate annealing) were used for preparation of multi-coated PZT thin films. 2500$\AA$-thick PZT thin films were obtained by the R-I and R-II methods and characterized by microstructure and dielectric properties. In case of using R-II, the microstructure was finer than that of R-I and there was no distinguishable difference in dielectric properties of PZT thin films between the R-I and R-II methods. But dielectric properties were enhanced by increasing perovskite phase fraction with increasing annealing temperature. Measured dielectric constant of PZT thin film annealed at 62$0^{\circ}C$ using the R-I method was 256 at 1kHz. Its remanant polarization (Pr) and coercive field (Ec) were 14.4$\mu$C/$\textrm{cm}^2$ and 64kV/cm, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.410-414
• /
• 2013

Rapid thermal processing (RTP) abruptly decreases the time required to perform solar cell processes. RTP were used to form emitter of crystalline silicon solar cells. The emitter sheet resistance is studied as a function of time and temperature. The objective of this study is reduction of doping process time with same performance. Emitter difRapid thermal dfusion was carried out by using a spin on doping and a RTP. iffusion was performed in the temperature range of $700{\sim}750^{\circ}C$ for 1m 30s~15 m. Thermal budgets yielded a $50{\Omega}/sq$ emitter using a P509 source. To reduce process time and get high efficiency, rapid thermal diffusion by IR lamp was employed in air atmosphere at $700^{\circ}C$ for 15 m.

• Applied Science and Convergence Technology
• /
• v.26 no.5
• /
• pp.133-138
• /
• 2017

We investigated the interface defect engineering and reaction mechanism of reduced transition layer and nitride layer in the active plasma process on 4H-SiC by the plasma reaction with the rapid processing time at the room temperature. Through the combination of experiment and theoretical studies, we clearly observed that advanced active plasma process on 4H-SiC of oxidation and nitridation have improved electrical properties by the stable bond structure and decrease of the interfacial defects. In the plasma oxidation system, we showed that plasma oxide on SiC has enhanced electrical characteristics than the thermally oxidation and suppressed generation of the interface trap density. The decrease of the defect states in transition layer and stress induced leakage current (SILC) clearly showed that plasma process enhances quality of $SiO_2$ by the reduction of transition layer due to the controlled interstitial C atoms. And in another processes, the Plasma Nitridation (PN) system, we investigated the modification in bond structure in the nitride SiC surface by the rapid PN process. We observed that converted N reacted through spontaneous incorporation the SiC sub-surface, resulting in N atoms converted to C-site by the low bond energy. In particular, electrical properties exhibited that the generated trap states was suppressed with the nitrided layer. The results of active plasma oxidation and nitridation system suggest plasma processes on SiC of rapid and low temperature process, compare with the traditional gas annealing process with high temperature and long process time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.69-72
• /
• 1999

A Well oriented Bi$_2$re$_2$CaCu$_2$O$\sub$8/(Bi2212) superconductor thick films were formed successfully on a copper substrate by liquid reaction between a Cu-free precursor and Cu tape using method in which Cu-free BSCO powder mixture was printed on copper plate and heat-treated. And we examined the mechanism for the rapid formation of Bi2212 superconducting films from observing the surface microstructure with heat-treatment time. At heat-treatment temperature, the printing layer partially melt by reacting with CuO of the oxidizing copper plate, and the nonsuperconducting phases present in the melt are typically Bi-free phases and Cu-free phases. Following the partial melting, the Bi$_2$Sr$_2$CaCu$_2$O$\sub$8/ superconducting phase is formed at Bi-free phase/liquid interface by nucleation and grows. It was confirmed that the phase colony from the phase diagram of Bi$_2$O$_3$-(SrO+CaO)/2-CuO system is similar to the observed result.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.4
• /
• pp.189-203
• /
• 2018

In this paper, a Software Defined Radio (SDR) architecture was designed and implemented for rapid prototyping of GNSS receiver. The proposed SDR can receive various GNSS and direct sequence spread spectrum (DSSS) signals without software modification by expanded input parameters containing information of the desired signal. Input parameters include code information, center frequency, message format, etc. To receive various signal by parameter controlling, a correlator, a data bit extractor and a receiver channel were designed considering the expanded input parameters. In navigation signal processing, pseudorange was measured based on Coordinated Universal Time (UTC) and appropriate navigation message decoder was selected by message format of input parameter so that receiver position can be calculated even if SDR is set up various GNSS combination. To validate the proposed SDR, the software was implemented using C++, CUDA C based on GPU and USRP. Experimentation has confirmed that changing the input parameters allows GPS, GLONASS, and BDS satellite signals to be received. The precision of the position from implemented SDR were measured below 5 m (Circular Error Probability; CEP) for all scenarios. This means that the implemented SDR operated normally. The implemented SDR will be used in a variety of fields by allowing prototyping of various GNSS signal only by changing input parameters.

• Journal of KIISE
• /
• v.42 no.12
• /
• pp.1474-1479
• /
• 2015

With mobile devices showing marked improvement in performance in the age of the Internet of Things (IoT), there is demand for rapid processing of the extensive amount of multimedia big data. However, because research on image searching is focused mainly on increasing accuracy despite environmental changes, the development of fast processing of high-resolution multimedia data queries is slow and inefficient. Hence, we suggest a new distributed image search algorithm that ensures both high accuracy and rapid response by using feature extraction of distributed images based on MapReduce, and solves the problem of memory scalability based on BIRCH indexing. In addition, we conducted an experiment on the accuracy, processing time, and scalability of this algorithm to confirm its excellent performance.

• Journal of Powder Materials
• /
• v.17 no.3
• /
• pp.190-196
• /
• 2010

In this paper, rapid solidified Mg-4.3Zn-0.7Y (at.%) alloy powders were prepared using an inert gas atomizer, followed by a severe plastic deformation technique of high pressure torsion (HPT) for consolidation of the powders. The gas atomized powders were almost spherical in shape, and grain size was as fine as less than $5\;{\mu}m$ due to rapid solidification. Plastic deformation responses during HPT were simulated using the finite element method, which shows in good agreement with the analytical solutions of a strain expression in torsion. Varying the HPT processing temperature from ambient to 473 K, the behavior of powder consolidation, matrix microstructural evolution and mechanical properties of the compacts was investigated. The gas atomized powders were deformed plastically as well as fully densified, resulting in effective grain size refinements and enhanced microhardness values.

• The KIPS Transactions:PartD
• /
• v.14D no.5
• /
• pp.459-470
• /
• 2007

A data stream is a massive unbounded sequence of data elements continuously generated at a rapid rate. Query processing for such a data stream should also be continuous and rapid, which requires strict time and space constraints. In most DSMS(Data Stream Management System), the selection predicates of continuous queries are grouped or indexed to guarantee these constraints. This paper proposes a new scheme tailed an ASC(Attribute Selection Construct) that collectively evaluates selection predicates containing the same attribute in multiple continuous queries. An ASC contains valuable information, such as attribute usage status, partially pre calculated matching results and selectivity statistics for its multiple selection predicates. The processing order of those ASC's that are corresponding to the attributes of a base data stream can significantly influence the overall performance of multiple query evaluation. Consequently, a method of establishing an efficient evaluation order of multiple ASC's is also proposed. Finally, the performance of the proposed method is analyzed by a series of experiments to identify its various characteristics.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1753-1765
• /
• 2000

As the areas of computer application are expanded, real-time application environments that must process as many transactions as possible within their deadlines, such as a stock transaction systems, ATM switching systems etc, have been increased recently. The reason why the conventional database systems can't process soft real-time applications is the lack of prediction and poor performance on processing transaction's deadline. If transactions want to access data stored at the secondary storage, they can not satisfy requirements of real-time applications because of the disk delay time. This paper designs a main-memory database prototype systems to be suitable to real-time applications and then this system can produce rapid results without disk i/o as all of the information are loaded in main memory database. In thesis proposed the improved techniques with respect to logging, checkpointing, and recovering in our environment. In order to improve the performance of the system, a) the frequency of log analysis and redo processing is reduced by the proposed redo technique at system failure, b) database consistency is maintained by improved fuzzy checkpointing. The performance model is proposed which consists of two parts. The first part evaluates log processing time for recovery and compares with other research activities. The second part examines checkpointing behavior.