• The korean journal of orthodontics
• /
• v.51 no.4
• /
• pp.241-249
• /
• 2021

Objective: This study aimed to evaluate the volume, amount, and localization of root resorption in the maxillary first premolars using micro-computed tomography (micro-CT) after expansion with four different rapid maxillary expansion (RME) appliances. Methods: In total, 20 patients who required RME and extraction of the maxillary first premolars were recruited for this study. The patients were divided into four groups according to the appliance used: mini-implant-supported hybrid RME appliance, hyrax RME appliance, acrylic-bonded RME appliance, and full-coverage RME appliance. The same activation protocol (one activation daily) was implemented in all groups. For each group, the left and right maxillary first premolars were scanned using micro-CT, and each root were divided into six regions. Resorption craters in the six regions were analyzed using special CTAn software for direct volumetric measurements. Data were statistically analyzed using Kruskal-Wallis one-way analysis of variance and Mann-Whitney U test with Bonferroni adjustment. Results: The hybrid expansion appliance resulted in the lowest volume of root resorption and the smallest number of craters (p < 0.001). In terms of overall root resorption, no significant difference was found among the other groups (p > 0.05). Resorption was greater on the buccal surface than on the lingual surface in all groups except the hybrid appliance group (p < 0.05). Conclusions: The findings of this study suggest that all expansion appliances cause root resorption, with resorption craters generally concentrated on the buccal surface. However, the mini-implant-supported hybrid RME appliance causes lesser root resorption than do other conventional appliances.

• Imaging Science in Dentistry
• /
• v.32 no.1
• /
• pp.27-33
• /
• 2002

Purpose: To evaluate the influence of threshold value of computed tomography on the accuracy of rapid prototyping (RP) medical model Material and Methods : CT datas of a human dry skull were transferred from CT scanner via compact disk to a personal computer (PC). 3-dimensional image reconstruction on PC by V-works/sup TM/ 3.0 (CyberMed. Inc.) software and RP models fabrication were followed. 2-RP models were produced by threshold value of 500 and 800 selected in surface rendering process. Linear measurements between arbitrary 12 anatomical landmarks on dry skull, 3-D image model, and 2-RP models were done and compared. Thus, the accuracy of 500 RP and 800RP models was respectively evaluated. Results: There was mean difference (% difference) in absolute value of 2.27 mm (2.73%) between linear measurements of dry skull and 500 RP model. There was mean difference (% difference) in absolute value of 1.94 mm (2.52%) between linear measurements of dry skull and 800 RP model. Conclusion: Slight difference of threshold value in rendering process of 3-D modelling made a influence on the accuracy of RP medical model.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.6
• /
• pp.505-509
• /
• 2005

For the purpose of developing a direct label-free electrochemical detection system, we have systematically investigated the electrochemical signatures of each step in the preparation procedure, from a bare gold electrode to the hybridization of label-free complementary DNA, for the streptavidin-modified electrode. For the purpose of this investigation, we obtained the following pertinent data; cyclic voltammogram measurements, electrochemical impedance spectra and square wave voltammogram measurements, in $Fe(CN)_6^{3-}/Fe(CN)_6^{4-}$ solution (which was utilized as the electron transfer redox mediator). The oligonucleotide molecules on the streptavidin-modified electrodes exhibited intrinsic redox activity in the ferrocyanide-mediated electrochemical measurements. Furthermore, the investigation of electrochemical electron transfer, according to the sequence of oligonucleotide molecules, was also undertaken. This work demonstrates that direct label-free oligonucleotide electrical recognition, based on biofunctional streptavidin-modified gold electrodes, could lead to the development of a new biosensor protocol for the expansion of rapid, cost-effective detection systems.

• Journal of the Ergonomics Society of Korea
• /
• v.14 no.2
• /
• pp.51-61
• /
• 1995

The purpose of the study was to provide good fitting of ready-to-wear pants for adult women. To pursue this purpose, the anthropometric data of Korean in 1992 (ADaM(R) 1.0) were analyze. The subjects were 1,580 women aged from 18 to 50 years. The body measurements of six age groups were compared. The results of data analysis showed that the height measurements( waist height, trochanter height, glutial height, perinneum height) of the late 40's were about 3cm shorter than those of the early 20's. The waist circumference of old subject group was 14.1cm larger than those of the young subject group. With rapid growing of waist circumference, the difference of hip and waist circumference was getting smaller with aging. The average difference between hip and waist circumferences of young adult group (18 to 24 yrs) was 24.3cm (SD 3.6cm) and the meaurement of old adult group (45 to 50 yrs) was 15.0cm (SD 5.6cm). The size of the women's pants which were manufactured by the top 50 manufacturers in Korea were compared. The difference between hip circumference and waist circumference listed on the size tag ranged from 12cm to 32cm. The body measurements of subjects and the standard size categories for pants were compared. The results showed that larger size categorise needed to be added to give better fits for older adult group.

• Smart Structures and Systems
• /
• v.17 no.1
• /
• pp.31-43
• /
• 2016

Applications of ultrasonic tomography to concrete structures have been reported for many years. However, practical and effective application of this tool for nondestructive assessment of internal concrete condition is hampered by time consuming transducer coupling that limits the amount of ultrasonic data that can be collected. This research aims to deploy recent developments in air-coupled ultrasonic measurements of solids, described in Part 1 of this paper set, to concrete in order to image internal inclusions. Ultrasonic signals are collected from concrete samples using a fully air-coupled (contactless) test configuration. These air coupled data are compared to those collected using partial semi-contact and full-contact test configurations. Two samples are considered: a 150 mm diameter cylinder with an internal circular void and a prism with $300mm{\times}300mm$ square cross-section that contains internal damaged regions and embedded reinforcement. The heterogeneous nature of concrete material structure complicates the application and interpretation of ultrasonic measurements and imaging. Volumetric inclusions within the concrete specimens are identified in the constructed velocity tomograms, but wave scattering at internal interfaces of the concrete disrupts the images. This disruption reduces defect detection accuracy as compared with tomograms built up of data collected from homogeneous solid samples (PVC) that are described in Part 1 of this paper set. Semi-contact measurements provide some improvement in accuracy through higher signal-to-noise ratio while still allowing for reasonably rapid data collection.

• Advances in environmental research
• /
• v.11 no.1
• /
• pp.17-30
• /
• 2022

Road transport allows all forms of land conditions to be met at less cost. Because of this function, despite numerous disadvantages, it becomes the most frequently used method of transport, especially in underdeveloped or developing countries. One of the most significant factors used in evaluating the atmosphere's air quality is the amount of CO₂, increasing people's density in indoor spaces. The amount of CO₂ indoors is, therefore, vital to determine. In this study, CO₂ and temperature measurements made on nine different bus journey was made in Turkey. The minimum and maximum values were recorded as 555 ppm and 3000 ppm CO₂, respectively, in the measurements. On all journeys, the average concentration is 1088.72 ppm. The minimum and maximum values were measured as 17.4℃ and 32.7℃ in the temperature measurements, and the average of all trips was calculated to be 25.76℃. In this study conducted before the Covid-19 pandemic, it was determined that the amount of CO₂ increased with the density and insufficient ventilation in the buses. The risk of infection increases in places with high human density and low clean air. For situations such as pandemics, CO₂ measurement is a rapid indicator of determining human density.

• Journal of the Korean Society of Costume
• /
• v.64 no.4
• /
• pp.106-117
• /
• 2014

The purpose of this study is to provide basic information for the development of well-fitting and comfortable brassieres for women in their 30s, based on the classification of breast shapes by utilizing 3D body measurement data of women in the age group. The result of processing the measurements from the 3D body scan data through RapidForm 2006 shows that while the vertical body measurements decrease, the horizontal measurements, which indicates the degree of obesity, increase proportionally with age. Also, the relevant measurements for upper breasts increase proportionally with age, while the measurements for lower part of the breasts decrease as the degree of sagging increases. Four composition factors of the breasts were identified through the factor analysis: Factor 1 is the level of volume in the breasts and the surrounding area; Factor 2 is the position of nipples and the shape of upper part of breasts; Factor 3 is the position and vertical length of the breasts; Factor 4 is the shape of lower part of breasts; and Factor 5 is the shape of inner part of breasts and degree of width between both breasts. The breasts have been categorized into three distinctive shapes: Breast Shape 1, Breast Shape 2 and Breast Shape 3. According to the results of the cluster analysis, the largest percentage (36.68%) of women in their 30s falls into the category of Breast Shape 2 with small volume and flat upper breasts, followed by Breast Shape 1 (32.66%) with large volume in the upper and lower parts of breasts, and large side to side area, and Breast Shape 3 (30.65%) with average volume and width between breasts.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.6
• /
• pp.407-412
• /
• 2000

Environmental biosensors and related techniques for monitoring organochlorines, endocrine disrupting chemicals and cyanobacterial toxins are described. The practical requirements for an ideal environmental biosensor are analyzed. Specific case studies for environmental applications are reported for triazines, chlorinated phenols, PCBs, microcystins, and endocrine disrupting chemicals. A new promising approach is reported for microcystins and alkylphenols that utilize electrooptical detection.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.33-36
• /
• 2000

The purpose of this study investigated underground oil storage(USTs) and Landfill using the envi-cone penetrometer system. The electrical resistivity sensor, pH sensor, ORP sensor, and thermometer are installed in envi-cone penetrometer system. This envi-cone penetrometer system provides a continuous profile of measurements, and it is rapid, repeatable, reliable and cost effective for investigation of contaminated ground.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.665-668
• /
• 2006

Sodium is a serious contamination in LTPS TFT process. It causes the abnormal characteristics of TFT in operation. Contaminated areas can be seen in SEM images, but EDX measurements do not have adequate sensitivity to confirm the presence of superficial sodium residues. We employed SIMS as a fast analysis method to map the non-uniform distribution of sodium on the surface. SIMS can also indicate the thickness of the contamination.