• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.681-688
• /
• 2000

This study presented the new method for evaluating the coefficient of consolidation by using inflection point method which was based on the fact that time factor, T corresponding to the inflection point of a semilogarithmic plot of a time curve is fixed and equals to T ＝ 0.405 at 70% consolidation. In the proposed method, the next load increment is applied as soon as the necessary time required to identify the inflection point. Thus, the coefficient of consolidation may be easily evaluated. The time required to complete the testing using this rapid consolidation method could be as low as 1.5-3 hours compared with 1 or 2 weeks in the case of the conventional consolidation test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.91-96
• /
• 2000

Glass fiber reinforced thermoplastic composites were manufactured by Rapid Press Consolidation Technique(RPCT) as functions of temperature, pressure and time in pre-heating, consolidation and solidification sections during the manufacturing processing. It was found that the material property is greatly affected by pre-heating temperature under vacuum, mold temperature and molding pressure. Among them, the temperature In the mold was the most critical factor in determining the mechanical properties and the molded conditions of specimen. The crystallinity of PET matrix was also investigated by differential scanning calorimetry(DSC) measurements for various processing conditions. The level of crystallinity($X_c$) depended strongly on the mold temperature, cooling rate and the type of composite. The difference in $X_c$ is believed to be one of important factors in characterizing the mechanical properties.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.85-93
• /
• 2002

본 연구에서는 Cour(1971)가 제안한 변곡점법(Inflection Point Method)을 이용하여 압밀계수를 예측하기 위한 새로운 방법을 소개하였다. 여기서, 변곡점은 압밀도(U)와 시간계수(log T) 관계곡선의 변곡점 중에서 압밀도($U_i$)가 70.03% 일 때의 시간계수 $T_i$=0.405에 상응하는 점이다. 제안된 변곡점법에 의한 신속한 압밀시험 방법에서 각 단계별 하중재하는 변곡점을 확인한 직후에 이루어지므로 압밀시험에 소요되는 시간을 단축시킬 수 있으며, 압밀계수를 빠른 시간 내에 쉽게 구할 수 있다. 이 신속한 압밀시험법에 소요되는 시간은 기존의 압밀시험의 경우 1주 또는, 2주의 기간이 소요되는데 비하여 0.5시간~9시간이 소요되므로 압밀시험을 보다 신속히 완료할 수 있다. 본 연구에서는 보다 정규화된 결과를 얻고자 침강장치를 고안하였으며, 그 결과의 분석에서 비 교란시료의 압밀정수들과 잘 부합하는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.813-821
• /
• 2002

Glass fiber reinforced PET matrix composite was manufactured by rapid press consolidation technique as functions of temperature, pressure and time in pre-heating, consolidation and solidification stages. The optimal manufacturing conditions for this composite were discussed based on the void content, tensile, interlaminar shear and impact properties. In addition, the levels of crystallinity with various manufacturing conditions were measured using differential scanning calorimetry to investigate the mechanical properties of this composite material as a function of crystallinity. Among many processing parameters, the mold temperature and the cooling rate after forming were found to be the most critical factors in determining the level of crystallinity and mechanical properties. The level of crystallinity affects the tensile properties to some degree. However, impact properties are affected much more. It also affects the degree of ductility, which determines the impact energy of this material.

• 한국지반공학회지:지반
• /
• 제4권4호
• /
• pp.5-18
• /
• 1988

본 연구는 인공연약점토를 시료로 하여 미려밀점토의 비배수 전단강도가 압밀과정에서 어떻게 변 이되는가를 고색하고 그 결과를 점토련자가 상당한 속도를 가지고 지적적으로 퇴적하고 있는 해천 모면에 적용하여 사면의 안정성을 검토하였다. 비배수 삼동려축 전단강도는 여밀도가 증가함에 따라 포물선을 그리며 증가하였고 유효응력과는 불 가분의 관계가 있음이 고찰되었다. 사면안정 검토에는 실험결과치들이 유한요소 프로그램에 입력되 감으며 흙의 여축성과 투수계수도 여밀도에 따라 변화시켰다. 퇴적률, 여밀도간의 관계와 사면붕괴시점과 이동토최예측도가 제시되었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.504-507
• /
• 2002

Glass fiber reinforced PET (Poly-Ethylene-Terephthalate) matrix composite was manufactured by rapid press consolidation technique as functions of temperature, pressure and time in pre-heating, consolidation and solidification stages. The optimal manufacturing conditions for this composite were discussed based on the void content, tensile, interlaminar shear, and impact properties. A tensile test was attempted to investigate the mechanical properties of the composite. It is found that the level of crystallinity and microstructure affects on the tensile properties substantially.

• Advances in materials Research
• /
• 제1권1호
• /
• pp.51-74
• /
• 2012

A powder metallurgy-based rapid consolidation technique, Plasma Pressure Compaction ($P^2C^{(R)}$), was utilized to produce near-net shape parts of gamma titanium aluminides (${\gamma}$-TiAl). Micron-sized ${\gamma}$-TiAl powders, composed of Ti-50%Al and Ti-48%Al-2%Cr-2%Nb (at%), were rapidly consolidated to form near-net shape ${\gamma}$-TiAl parts in the form of 1.0" (25.4 mm) diameter discs, as well as $3"{\times}2.25"$ ($76.2mm{\times}57.2mm$) tiles, having a thickness of 0.25" (6.35 mm). The ${\gamma}$-TiAl parts were consolidated to near theoretical density. The microstructural morphology of the consolidated parts was found to vary with consolidation conditions. Mechanical properties exhibited a strong dependence on microstructural morphology and grain size. Because of the rapid consolidation process used here, grain growth during consolidation was minimal, which in turn led to enhanced mechanical properties. Consolidated ${\gamma}$-TiAl samples corresponding to Ti-48%Al-2%Cr-2%Nb composition with a duplex microstructure (with an average grain size of $5{\mu}m$) exhibited superior mechanical properties. Flexural strength, ductility, elastic modulus and fracture toughness for these samples were as high as 1238 MPa, 2.3%, 154.58 GPa and 17.95 MPa $m^{1/2}$, respectively. The high temperature mechanical properties of the consolidated ${\gamma}$-TiAl samples were characterized in air and vacuum and were found to retain flexural strength and elastic modulus for temperatures up to $700^{\circ}C$. At high temperatures, the flexural strength of ${\gamma}$-TiAl samples with Ti-50%Al composition deteriorated in air by 10% as compared to that in vacuum. ${\gamma}$-TiAl samples with Ti-48%Al-2%Nb-2%Cr composition exhibited better if not equal flexural strength in air than in vacuum at high temperatures.

• 한국지반공학회지:지반
• /
• 제13권1호
• /
• pp.137-146
• /
• 1997

A Study on the 본 연구에서는 플라스틱드레인을 이용하여 진공수평배수에 의해 개량된 준설 점토 지반의 압밀거동을 파악하기 위하여 대형 압밀시험을 실시하였으며, 실험 결과가 포텐결중공원주의 압밀이론을 이용한 수치해석에 의해 비교 검토되었다. 본 연구 실험결과에 의하면 수평배수진공압밀시험은 점토층 내부의 함수비 및 간극수압과 드레인 배수 속도 등이 진공압밀 시간 경과에 따라 감소되어 압밀이 급속하게 진행되고 있음이 확인되었다. 점토층 중공원주의 방사류에 대한 선형포텐샬압밀이론을 이용하여 수치 압밀해석 결과 간극수압은 확산 형태보다 흙의 변형과 투수에 의해 크게 좌우되고 있으므로, 지표면 부근에서의 실측 침하량은 압밀응력증가율 a가 -0.5정도에서 수치해석과 일치하며 또한 드레인 설치 부근에서의 점토층 침하량은 Baryon 압밀이론과 유사한 거동을 나타내고 있다. 최종적으로 수평 배수에 대한 적당한 선택과정을 포함한 설계 및 시공관리가 시험결과에 의하여 설명 되었으며 포텐셜압밀이론은 진공배수시 수평드레인에 의한 압밀거동을 정확하게 예측할 수 있다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.309-312
• /
• 2002

This paper reviews depositional environments, consolidation characteristic of marine deposits along the Nam-Yang river mouth and then analytical solution of self-weight consolidation is made to find consolidated state. This area has been deposited through the short geological age(22year). It's deposition rate is as high as 70cm/year and the height of deposition may be $3{\sim}12m$. It's known that this area is in the under-consolidated state from OCR and analytical solution. It is conclude that the under-consolidated state should be considered in prediction of consolidation settlement.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권8호
• /
• pp.1825-1842
• /
• 2013

Rapid growth of the IT industry has led to significant energy consumption in the last decade. Data centers swallow an enormous amount of electrical energy and have high operating costs and carbon dioxide excretions. In response to this, the dynamic consolidation of virtual machines (VMs) allows for efficient resource management and reduces power consumption through the live migration of VMs in the hosts. Moreover, each client typically has a service level agreement (SLA), this leads to stipulations in dealing with energy-performance trade-offs, as aggressive consolidation may lead to performance degradation beyond the negotiation. In this paper we propose a heuristic based resource allocation of VM selection and a VM allocation approach that aims to minimize the total energy consumption and operating costs while meeting the client-level SLA. Our experiment results demonstrate significant enhancements in cloud providers' profit and energy savings while improving the SLA at a certain level.