• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.475-487
• /
• 2003

This study developed an analysis model of estimating fatigue damage using the linear elastic fracture mechanics method. Stress history occurring to an element when a truck passed over a bridge was defined as block loading and crack closure theory explaining load interaction effect was applied. Stress range frequency analysis considering dead load stress and crack opening was done. Probability of stress range frequency distribution was applied and the probability distribution parameters were estimated. The Monte Carlo simulation of generating the probability various of distribution was performed. The probability distribution of failure block numbers was obtained. With this the fatigue reliability of an element not occurring in failure could be calculated. The failure block number divided by average daily truck traffic remains the life of a day. Fatigue reliability analysis model was carried out for the welding member of cross beam flange and vertical stiffener of steel box bridge using the proposed model. Consequently, a 3.8% difference was observed between the remaining life in the peak analysis method and in the proposed analysis model. The proposed analysis model considered crack closure phase and crack retard.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.113-122
• /
• 2010

The ripple within the quiet zone in the CATR(Compact Antenna Test Range) would be increased due to the diffraction at the edge of the reflector. Therefore, the reflector equipped with the serrations is generally used to reduce the ripple within the quiet zone. In this paper, the modified asymmetric triangular serrations are proposed, and the diffraction of the proposed serrations is analyzed using the Fresnel diffraction formula. The ripple of amplitude and phase between the conventional triangular and the proposed serrations are compared to confirm the ripple of the proposed serrations. As the result of the modulated the reflector size, height of the serrations and numbers of serrations, it is confirmed that the ripple of the proposed serrations is less than the conventional triangular serrations. Accordingly, proposed serrations are expected to reduce the ripple within quiet zone.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.58-64
• /
• 2000

Assuming that the performance of holographic storage media is ideal, we estimate the area storage density of disk-type holographic memories, when the method of either angle multiplexing, or rotational multiplexing, or both are used. The area storage density is strongly dependent on the f numbers (ratio of focal length to diameter) of both the Fourier transform lens in the signal arm, denoted by $F/#_2$, and the angle range over which the reference beam is incident (or, the equivalent f number corresponding to the angle range denoted by $F/#_1$). The area storage density is largely independent of the pixel pitch of the spatial light modulator when the Fourier plane holograms are recorded, while it is sensitive to the pixel pitch when the image plane holograms are recorded. In general, to obtain high area storage density, the Fourier or at least near Fourier plane holograms rather than the image plane holograms should be recorded. In addition, when the thickness of the recording materials are less than approximately $500\mu\extrm{m}$, rotational multiplexing gives higher area storage densities than angle multiplexing does. To increase the storage density further, however, it is desirable to use both of the two multiplexing methods in combination.nation.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.282-289
• /
• 2011

GHz electromagnetic interference (EMI) characteristics are analyzed for a 3dimensional (3D) stacked chip power distribution network (PDN) with through silicon via (TSV) connections. The EMI problem is mostly raised by P/G (power/ground) noise due to high switching current magnitudes and high PDN impedances. The 3D stacked chip PDN is decomposed into P/G TSVs and vertically stacked capacitive chip PDNs. The TSV inductances combine with the chip PDN capacitances produce resonances and increase the PDN impedance level in the GHz frequency range. These effects depend on stacking configurations and P/G TSV designs and are analyzed using the P/G TSV model and chip PDN model. When a small size chip PDN and a large size chip PDN are stacked, the small one's impedance is more seriously affected by TSV effects and shows higher levels. As a P/G TSV location is moved to a corner of the chip PDNs, larger PDN impedances appear. When P/G TSV numbers are enlarged, the TSV effects push the resonances to a higher frequency range. As a small size chip PDN is located closer to the center of a large size chip PDN, the TSV effects are enhanced.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.1019-1030
• /
• 1994

Natural convection heat transfer from a horizontal ice cylinder immersed in quiescent cold pure water was studied experimentally. The experiment was conducted for the ambient water temperatures ranging from $2.0^{\cric}C$ to $10.0^{\circ}C$. The flow fields around an ice cylinder and its melting shapes were visualized and local Nusselt numbers obtained. Especially, its attention was focused on the density maximum effects and stagnation point Nusselt number. From the visualized photographs of flow fields, three distinct flow patterns were observed with the ambient water temperature variation. The melting shapes of ice cylinder are various in shape with flow patterns. Steady state upflow was occured at the range of $2.0^{\circ}C \leq T_{\infty} \leq 4.6^{\circ}C$ and steady state downflow was occured at $T_{\infty} \geq 6.0^{\circ}C$. In the range of $4.7^{\circ}C < T_{\infty} < 6.0^{\circ}C$, three-dimensional unsteady state flow was observed. Especially, the melting shapes of ice cylinder have formed the several spiral flutes for the temperatures ranging from $5.5^{\circ}C$ to $5.8^{\circ}C$. For upflow regime, the maximum stagnation point Nusselt number exists at $T_{\infty} = 2.5^{\circ}C$ and as the ambient water temperature increases the Nusselt number decreases. At ambient water temperature of about $5.7^{\circ}C$, Nusselt number shows its minimum value.

• Applied Biological Chemistry
• /
• v.30 no.2
• /
• pp.133-140
• /
• 1987

The physicochemical properties and characteristics of potato starches which were isolated from the six varieties were investigated. The ash content of starch prepared from the Arkula showed lower than that of the other five samples. The shapes of starch granules were oval and round, and the average diameters were in the range of $25{\sim}26.9$ microns. The main constituents of the inorganic components of each starch sample were found to be phosphorus and potassium. The amylose contents of starches were between $27.2{\sim}32%$, and blue value, alkali numbers were in the range of $0.42{\sim}0.45$ and $5.8{\sim}7.7$, respectively. Amylograph data revealed that Nook Sack had the highest viscosity at all reference points. The swelling power and solubility patterns were negligible until $50^{\circ}C$, thereafter it increased rapidly.

• Clinics in Shoulder and Elbow
• /
• v.23 no.4
• /
• pp.169-177
• /
• 2020

Background: We evaluated the need for arthroscopic capsular release (ACR) in refractory primary frozen shoulder (FS) by comparing clinical outcomes of patients treated with ACR and manipulation under anesthesia (MUA). Methods: We assessed patients with refractory primary FS, 57 patients (group A) who were treated with MUA and 22 patients (group B) who were treated with ACR. In group A, manipulation including a backside arm-curl maneuver was performed under interscalene brachial block. In group B, manipulation was performed only to release the inferior capsule before arthroscopic circumferential capsular release, which was carried out for the unreleased capsule after manipulation. Pain, range of shoulder motion, and American Shoulder and Elbow Surgeons score were recorded at 1 week, 3 months, 6 months, and 1 year after surgery. We compared outcome variables between treatment groups and between diabetics and non-diabetics and also evaluated the numbers of patients receiving additional intra-articular steroid injection. Results: Outcome variables at 3 months after surgery and improvements in outcome variables did not differ between groups. Group A showed significantly better results than group B in the evaluation of pain and range of motion at 1 week. Diabetics showed comparable outcomes to non-diabetics for most variables. Eleven patients required additional steroid injections between 8 to 16 weeks after surgery: 12.2% in group A, 18.2% in group B. Additional injections were given three times more often in diabetics compared to non-diabetics. Conclusions: MUA alone can yield similar clinical outcomes to ACR in refractory FS.

• Korean Journal of Environment and Ecology
• /
• v.21 no.2
• /
• pp.186-191
• /
• 2007

To provide some ecological information on protection and management of the mixed heronries, their distribution, breeding species and individual numbers, and site characteristics, which may be important to heron ecology, were investigated in Jeollanam-do during the 2005 breeding season. As a result of this census, 17 mixed heronries, containing a total of six ardeid species were found. Among those species, Great Egret (Egretta alba) and Grey Heron (Ardea cinerea) were found to breed in most sites (both 92%) and were most numerous (36.3%, 31.0% respectively). Many of the heronries (53.3%) were located within the bamboo forest. Other site characteristics were as follows: the mean area dimension of heronry was $2,346m^2$ with the range of $500{\sim}7,000m^2$ the mean distance between the two nearest heronries was 18.1km with the range of $5.6{\sim}40.4km$ the mean distance to the nearest village was 297m with the range of $10{\sim}2,000m$ the mean gradient of the topography was $18^{\circ}$ with the range of $2^{\circ}{\sim}40^{\circ}$, and 40.0% of the heronries were located in the eastern slopes.

• Proceedings of the Ginseng society Conference
• /
• 1974.09a
• /
• pp.137-146
• /
• 1974

This experiment was on the purpose to study the effects of different shading of Mulching treatments on the quality and yield of ginseng root. This experiment were conducted at Mei-Feng for one year, from July, 1972 to July, 1973. The variety been used was introduced Korea Panax ginsvng. Three different Shading of Mulching treatments have been studied. The results were summerized as follows: 1. The growth of ginseng plant is good under around 4,300 Lux of light intensity. Fig . showed the shadow treatment of straw had a better effect than that of black or grey plastic film. The differences between treatments were significant. 2. The adequate soil temperature for ginseng culture was in the range of $16-18^{\circ}C$. Fig 2. showed that there were significant differences among treatments, of which the straw shadow treatment had the best effect. 3. The growth of ginseng plant was greatly affected wth various shadow treatments. Fig 1. showed both straw and black plastic film treatments had a better effects on growth of stem, leaf area and leaf numbers. 4. Fig. 2. 3. 4. 5 indicated there were distingished differences among all treatments. The straw and black plastics film mulching treatments had a better effects on root length, root diameter, root weight and leaf weight than the grey plastic film. 5. The amount of plant alkaloids and panacene content had related to the shadow treatment, as showed in Fig. 6 and 7 that straw shadow treatment had greatly increased the procuction of plant alkaloids and panacene content. 6. The quality and yield of roots of ginseng greatly affected by different shading of mulching treatments.

• Imaging Science in Dentistry
• /
• v.30 no.2
• /
• pp.101-108
• /
• 2000

Purpose : The effects of step numbers of copper wedge and exposure on the coefficient of determination (r²) of the conversion equation to Cu-equivalent image and on the Cu-equivalent value (mmCu) and it's coefficient of variation measured at each copper step and the mandibular premolar area were evaluated. Method: Digital image analyzing system consisted of scanner, personal computer, and a stepwedge with 10 steps of 0.03 mm copper in thickness as reference material was prepared for quantitative assessment of the bone mineral density. NIH image program was used for analyzing images. Results : The film having moderately high film density showed the discrepancy between the real thickness and the measured Cu-equivalent value of each copper step. The Cu-equivalent image was dependent on the determinational coefficient of the conversion equation than the coefficient of variance of the measured value. Conclusion : Obtaining conversion equation with high coefficient of determination and proper film exposure are supposed to be neccessary for quantitative assessment of bone density. Multiple steps in the range of the corresponding copper thickness to the bone density of the area to be measured should be prepared.