• Title/Summary/Keyword: radio unit

Search Result 252, Processing Time 0.028 seconds

The Study of an Automatic Tracking and Pointing Method and the Regarding System for Facing Two Antennas (상호 대국의 안테나 간 자동 추적 지향 기법 및 장치 연구)

  • Gimm, Hak In;Cho, Sung Hoon;Lee, Chong Hyo
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.18 no.5
    • /
    • pp.498-509
    • /
    • 2015
  • The existing mobile antenna networks in the military use have been operated by the manual pointing between two antennas. The work presented here describes the study of ATPC(Automatic Tracking and Pointing Control) system between facing antennas and the related tracking and pointing performances. This system is able to automatically track the maximum RSSI(Received Signal Strength Indication) value from the source's RF(Radio Frequency) signal and then control for maintaining the LOS(Line of Sight) between two antennas. The system has three major units; the driving unit consisting of motors, harmonic drives and encoders, the sensor unit with a GPS(Global Positioning System) and AHRS(Attitude and Heading Reference System) and the control unit regulating all the tracking and pointing events. By using PI(Proportional and Integral) controller, this system is able to properly track and point the other antenna under the external disturbance like the wind load. Both the simulation and the experimental works have been successively carried out to prove the performances of the system.

The Design and Implementation of TDD-OFDMA Feedback Signal Cancellation(FSC) Digital RF Repeater (TDD-OFDMA 방식의 귀환 신호 제거 디지털 RF 중계기 설계 및 구현)

  • Ryoo Gyoo-Tae;Kim Dae-Yen;Park Se-Jun
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2006.08a
    • /
    • pp.57-61
    • /
    • 2006
  • As high speed internet users are tremendously increasing, three are keenly in need of development of high speed portable internet technology which can provide high quality wireless internet service cheaply even in the mobile. Unlike the FDD-CDMA, TDD-OFDMA has relatively poor wave environment with inducing interference, fading and delay because it agrees to multi-carrier modulation method and time-division radio telecommunication system. To solve this problem, it is necessary to develop repeater operating by digital signal processing method which have more strict wireless channel control and wave signal processing technology over TDD telecommunication equipments. This thesis is dealing with design and implementation of Digital RF Repeater which implemented 'Synchronization Acquisition Unit', 'TDD signal switching Unit', 'Feedback Signal Cancellation Unit'. Over this argument, we will develop digital RF repeater with more cheap, more adaptive in wave environment like oscillation control, adaptive wave monitoring and output increasing and having control function as a result it will be helpful for success in high speed portable internet service business.

  • PDF

The Research about a Control Data Duplication Transmission Technique (제어데이터 중복전송기법에 관한 연구)

  • Lee, Young-Ju;Kang, Soon-Duk
    • The Journal of Information Technology
    • /
    • v.9 no.4
    • /
    • pp.57-63
    • /
    • 2006
  • The intelligent elder brother groove network robot service the new broadband presence line is conversionce application service. Robot control data transmission hazard UDP packet of the remote control data which stands duplication necessary to transmit. TCP the error ratio to be high qualitative recording transmission pattern it of the transmission unit and is irregular the distance is distant to show and also the transmission lag is visible increases. The recording packet drop whose UDP degree error ratio will be high is frequent and does not arrive packet little by little increases is a possibility of knowing in the transmission unit. The technique which it proposes with traffic pattern of the transmission unit is visible the transfer characteristic of the same shape from 1% packet error ratio degree. The effective transmission technique of the robot control data which puts a base in UDP protocols was proposed from the present paper. Following research it leads and it follows the duplication transmission number of time in error rate of radio link and it was thought all that controls petty the research of the mechanism which progresses is necessary.

  • PDF

Packet Transceiver on 2.4GHz for Whooper Swan

  • Nakada, Kaoru;Nakajima, Isao;Hata, Jun-ichi;Ta, Masuhisa
    • Journal of Multimedia Information System
    • /
    • v.5 no.2
    • /
    • pp.91-98
    • /
    • 2018
  • We devised a bird-borne transceiver unit for S-band packet radio communications based on the CC2500 transceiver, a device manufactured by Texas Instruments (TI). Our assessments determined the optimal parameters needed to achieve successful bird-to-center communication over a distance of 18 km and bird-to-bird communication over a distance of 200 m. These parameters included optimal modulation methods, transmission rates, and antennas. We equipped the transceiver unit with a modified dipole antenna (collinear antenna), which we tested in a 10 m anechoic chamber. Our experimental assessments and circuit design review identified the following parameters: 2FSK modulation method; 14.28 kHz frequency shift; 101.56 kHz IF reception bandwidth; and Manchester encoding (+). Our assessments showed bird-to-bird communications could be achieved over a distance of 200 m assuming MSK, FEC (+), and 500 kbps. Following tests by an official body, we obtained 28 sets of a type approval license for 2.4 GHz. In cooperation with the Yamashina Institute for Ornithology, we attempted to tag and release six or more swans. This unit gives us the ability to obtain vital data on swans. We expect this data to provide significant benefits, including clues on improving screening for infected individuals.

Novel Maritime Wireless Communication based on Mobile Technology for the Safety of Navigation: LTE-Maritime focusing on the Cell Planning and its Verification

  • Shim, Woo-Seong;Kim, Bu-Young;Park, Chan-Yong;Lee, Byeong-Hyeok
    • Journal of Navigation and Port Research
    • /
    • v.45 no.5
    • /
    • pp.231-237
    • /
    • 2021
  • Enhancing the performance of maritime wireless communication has been highlighted by the issue of cell planning in the sea area because of lack of an appropriate Propagation Loss Model (PLM). To resolve the cell planning issue in vast sea areas, it was essential to develop the (PLM) matching the intended sea area. However, there were considerable gaps between the prediction of legacy PLMs and field measurement in propagation loss and there was a need to develop the adjusted PLM (A-PLM). Therefore, cell planning was performed on this adjusted model, including modification of the base station's location, altitude, and antenna azimuth to meet the quality objectives. Furthermore, in order to verify the availability of the cell planning, Communication Service Quality Monitoring System (CS-QMS) was developed in the LTE-Maritime project to collect LTE signal quality information from the onboard equipment at regular intervals and to ensure that the service quality was high enough to satisfy the goals in each designated grid. As a result of verification, the success rate of RSRP was 95.7% for the intensive management zone (IMZ) and 96.4% for the interested zone (IZ), respectively.

Capacitively Loaded Loop Antenna Fed with Metamaterial Balun (Metamaterial 발룬으로 급전된 Capacitively Loaded 루프 안테나)

  • Jung, Youn-Kwon;Lee, Bom-Son
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.10
    • /
    • pp.1084-1090
    • /
    • 2009
  • This paper presents a balun consisting of a T-junction, a Right/Left Handed Transmission line(RLH-TL), and a conventional Right Handed(RH) line. It is assumed that the RLH-TL consists of N unit-cells. We provide closed-form solutions and design a very compact wideband(80 %) balun using CPW lines based on the obtained solutions. Then, we propose a capacitively loaded loop antenna designed for a uniform current distribution. The antenna resistance of the proposed antenna at resonance is about 204 ohms. The length of the unit cell is about $\lambda/12$(total length: $1\;\lambda$). The magnetic field generated from the proposed antenna is stronger than that of the conventional one by as much as 20 dB. We used a coplanar strip line(CPS) to combine the loop antenna and balun. The proposed antenna may be used as a near field UHF RFID reader antenna.

Situation of HPV16 E2 Gene Status During Radiotherapy Treatment of Cervical Carcinoma

  • Kahla, Saloua;Kochbati, Lotfi;Maalej, Mongi;Oueslati, Ridha
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.15 no.6
    • /
    • pp.2869-2873
    • /
    • 2014
  • Background: Human papillomavirus (HPV) integration within the E2 gene has been proposed as a critical event in cervical carcinogenesis. This study concerned whether HPV16 status and E2 gene intactness are predictive of radiation response in patients with cervical cancer. Materials and Methods: Biopsies of 44 patients with cervical cancer were collected before or after radiotherapy. The presence of HPV16 was assessed by polymerase chain reaction (PCR) using specific primers for the L1 region. E2 disruption was detected by amplifying the entire E2 gene. Results: HPV16 DNA was found in 54.5% of the clinical samples. Overall, 62.5% of the HPV16 positive tumors had integrated viral genome and 37.5% had episomal genome. There was a tendency of increase of HPV16 E2 negative tumors compared with HPV16 L1 ones in advanced stages (75% versus 20% in stage III respectively). Detection of E2 gene appeared influenced by the radiotherapy treatment, as the percentage of samples containing an intact HPV16 E2 was more frequent in pretreated patients compared to radiotherapy treated patients (66.6% versus 20%). The radiation therapy caused an eight-fold [OR= 8; CI=1.22-52.25; p=0.03] increase in the risk of HPV16 genome disruption. The integration status is influenced by the irradiation modalities, interestingly E2 disruption being found widely after radiotherapy treatment (75%) with a total fractioned dose of 50Gy. Conclusions: This study reveals that the status of the viral DNA may be used as a marker to optimize the radiation treatment.

Triplexer based on Filter Characteristics of CRLH Transmission Line and Triple-Band Amplifier Applications (CRLH 전송선로의 필터 특성을 이용한 트리플렉서와 삼중대역 증폭기에의 응용)

  • Yun, Jeong-Ho;Kim, Young;Yoon, Young-Chul
    • Journal of Advanced Navigation Technology
    • /
    • v.16 no.3
    • /
    • pp.433-439
    • /
    • 2012
  • In this paper, we proposed the triplexer using unit-cell of CRLH transmission line which has a bandpass characteristic to reduce adjacent channel interference. The input impedance of triplexer with each channel filter is operated open-circuit at the resonance frequencies of other channels. Such property is due to the combination a series and parallel resonance circuits of CRLH-TL unit-cell. The measured triplexer results are showed a measured insertion loss of each channel, less than 1.5 dB, matching at each port, less than 15dB and isolation between channel, better than 25 dB. Also, to validate the triplexer, a small signal amplifier with triple-band is designed and tested. the measured amplifier results show good agreements with prediction.

Wireless Access Network Architecture and Virtualization Scenarios for Next-Generation Mobile Communication Networks (차세대 이동통신 네트워크를 위한 무선 액세스 망 구조 및 가상화 시나리오)

  • Kim, Myunghwan;Kim, Su Min;Jung, Bang Chul;Park, Yeoun-Sik
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.10
    • /
    • pp.2150-2162
    • /
    • 2012
  • In accordance with evolution of next-generation mobile Internet, 2G, 3G, 4G, and B4G mobile communication wireless access networks will be co-existed and service providers will be merged as an integrated service provider. In addition, multiple virtual service operators will appear. In order to provide complicated unified-services, in the future Internet, wireless network virtualization where network resource is shared by various service operators is necessary. Therefore, in this paper, we investigate network architectures and virtualization scenarios for wireless access network virtualization where various wireless access technologies are flexibly operated by multiple service providers over next-generation wireless access networks. We expect that the virtualization scenario and network architecture yielded from this study can play a role as a basis for development of wireless access network virtualization algorithms.

Development of Real-time Blood Pressure Monitoring System using Radio Wave (전파를 이용한 실시간 혈압 모니터링 시스템 개발)

  • Jang, Dong-won;Eom, Sun-Yeong;Choe, Jae-Ik
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2015.05a
    • /
    • pp.308-311
    • /
    • 2015
  • Because worldwide interest in the health is increased, the real-time health monitoring system has been demanded to be more convenient non-contact and precise medical devices than conventional. Therefore we developed the blood pressure monitoring system using UWB(Ultra Wide Band) radio wave which contact to the human body through the radar and continuously collect a movement signal of the blood vessel. Then the collected data including pulse rate, systolic blood pressure, diastolic blood pressure is processed in real time. The system monitors and controls through a program-based embedded LCD(Liquid Crystal Display) using Qt GUI(Graphic User Interface) to be displayed in real time. We implement the system as a embedded system because of reducing the size of the limited resources. Existing PC GUI design mode is used relatively large memory, therefore it requires more CPU(Central Processing Unit) capacity and processing time.

  • PDF