• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.140-144
• /
• 2003

To investigate failure analysis of surface acoustic wave (SAW) filter for radio frequency, high temperature storage test was carried out. The failure criteria were insertion loss at passband and rejection level at stopband. As a result, the insertion loss at passband increase about 4 dB was due to damages of interdigital transducer (IDT). That is caused by poor adhesion between metal electrode(AI) and piezoelectric substrate and defects on a manufacturing process. This result indicates that good adhesion between electrode and ceramic substrate is important factor And also we investigated the demage factors of electrode. Screen possible of saw filter using high temperature storage test(HTOL) in the manufacturing phase be presented.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.90-95
• /
• 2021

In this paper, the design method for a high-sensitivity compact resonator for chipless RFID tags is proposed. Proposed high-sensitivity compact resonator uses an interdigital-capacitor structure instead of a capacitor-shaped strip structure in a conventional ELC resonator. The length of the electrode plate of the IDC structure is longer than that of the conventional capacitor-shaped structure, resulting in a larger equivalent capacitance of the resonator. This can lower the resonant peak frequency of the RCS characteristic. Two resonators with the same length of the square loop and the width of the strip are fabricated on an RF-301 substrate with a thickness of 0.8 mm. The experiment results show that the resonant peak frequency and value of the bistatic RCS for the ELC resonator were 4.305 GHz and -30.39 dBsm, whereas those of the proposed IDC resonator were 3.295 GHz and -36.91 dBsm. Therefore, the size of the resonator is reduced by 23.5% based on the measured resonant peak frequency of the RCS characteristic.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.631-639
• /
• 1996

Electrosurgical technique have been used in dentistry as an aid to soft tissue management for nearly 60 years. However, it was not until the late 1960s that the principles of electrosurgery were understood and improved equipment became available. Electrosurgery is a surgical procedure performed on soft tissue utilizing controlled high frequency electricaI(radio-frequency) currents in the range of 1,500,000 to 7,500,000 cyclesper second. The radio-frequency energy used in electrosurgery is able to cut and coagulate tissue because it focuses the energy at the small, active electrode. Advantages of electrosurgery for soft-tissue management during dental procedures include improved hemostasis, ease of tissue modification, improved visibility and so on, but adverse healing responses-including necrosis of soft tissue and sequestration of alveolar bone-have been reported. The present report provides examples of treatment of soft tissue and pulp tissue of primary teeth by electrosurgery. The results are as follows; 1. Electrosurgical techniques can be used for various procedures in pedodontics. 2. Electrosurgical procedures provide improved hemostasis and visibility in the operating field, which enable to remove, reshape, and contour soft tissues easily. 3. In pulpotomy technique, it was difficult to expect the variable pulpal response based on the degree of heat accumulation and the conditions of pulp tissues. Therefore, electrosurgical pulpotomy could not be considered as a method superior to formocresol pulpotomy. 4. A greater degree of dexterity and experiences in manipulation of the electrode is required compared with the conventional scalpel surgery.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1649-1651
• /
• 2002

Ultra-wide bandwidth (UWB) detection method has been widely used as a front end detection scheme for the ultra-high frequency (UHF) partial discharge (PD) monitoring systems. A broad-band video detector module was developed and characterized for the UHF UWB PD detection systems. The useable bandwidth of the module is more than 2 GHz and it is optimized for 50-ohm systems. The detection sensitivity and dynamic range of the module were characterized by using a known ns-width RF pulses of GHz range. The dynamic range is more than 6-decades and the module can detect pulsed RF signals down to 1 nW. The detector module can eliminate expensive equipment such as high speed oscilloscopes and radio frequency (RF) spectrum analyzers. Therefore, it enables one to use slow speed data acquisition systems for the PD monitoring at the UHF range. The detector module was used to detect real PDs of about <3 pC. The module converts the UWB PD signals into a low-bandwidth video signal with a high signal-to-noise ratio.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.42-47
• /
• 1999

This paper presents the information transmission between on-board and ground-site in MAGLEV. considering safety and high speed operation and density operation, information transmission between them is necessary. Therefore it is necessary for transmission system to ensure high speed transmission, low error rate, massive information, and reliability of information. To provide above conditions, 1.1km signal line assembly was constructed and Frequency Shift Keying(FSK) modulation and Open System Interconnection(OSI) based high-level data link control(HDLC) protocol are applied. To modulate digital signal for transmission from ground-site to on-board, carrier frequency of 70kHz is used and 90khz is used for transmission from on-board to ground-site. Transmission speed is 2400bps for consideration of train speed, quantity of information, and data error rate. And this paper introduces information monitoring considering user interface and presents the method for an effective data transmission in MAGLEV which is now being tested and intends to provide for an intelligent train operation system in future.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.1
• /
• pp.280-294
• /
• 2023

Unmanned aerial vehicles (UAVs) and millimeter-wave frequencies play key roles in supporting 5G wireless communication systems. They expand the field of wireless communication by increasing the data capacities of communication systems and supporting high data rates. However, short wavelengths, owing to the high millimeter-wave frequencies can cause problems, such as signal attenuation and path loss. To address these limitations, research on high directional beamforming technologies continue to garner interest. Furthermore, owing to the mobility of the UAVs, it is essential to track the beam angle accurately to obtain full beamforming gain. This study presents a beam tracking method based on the unscented Kalman filter using hybrid beamforming. The simulation results reveal that the proposed beam tracking scheme improves the overall performance in terms of the mean-squared error and spectral efficiency. In addition, by expanding analog beamforming to hybrid beamforming, the proposed algorithm can be used even in multi-user and multi-stream environments to increase data capacity, thereby increasing utilization in new-radio multiple-input multiple-output orthogonal frequency-division multiplexing systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.283-288
• /
• 2018

In this paper, it is required that the next generation wireless transmission system can support a large number of users without distortion of transmission signal with high data rate in various different propagation environment while using limited resources as efficiently as possible, and therefore an efficient transmission system is continuously required. Because of the large amount of data to be handled in a limited frequency band, a very complex digital modulation scheme is adopted. the linearity of the power amplifier determines the linearity of the entire communication system, and thus a linear amplifier is required. In cognitive radion systems, there is a power control issue in the relationship between primary and secondary users. This problem is solved by simulating the communication system so as to select the cognitive radio power while power control while overcoming linearity by using feed-forward PA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.1
• /
• pp.19-27
• /
• 2014

As frequency resource has taken on greater importance, Cognitive Radio(CR) technology has been considered as the solution to improve spectrum utilization by allowing a secondary user to utilize a licensed band when the primary user is absent. So spectrum sensing is significant part of CR for high performance. Recently, cooperative spectrum sensing that secondary users share each sensing results is proposed to improve spectrum sensing accuracy. In this paper, OR rule based cooperative spectrum sensing scheme using reporting error probability which occurs in user to fusion center(FC) channel The simulation results show that proposed scheme mitigates false alarm probability limitation which appears in existing cooperative spectrum sensing scheme by restricting the number of cooperating users using reporting error probability.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.1
• /
• pp.95-102
• /
• 2018

Only the habitat characteristics and breeding status of Paridae have been studied, in addition to the lack of research on Parus varius varius, there is no study on the home-range in the post fledging period. This study was analyzed the home-range size of Parus varius varius in the post fledging period. The survey was conducted in the site located in Dankook Univ. Cheonan Campus(Middle Chungcheong Province). We captured five newborn Parus varius varius using artificial nest was installed before. Radio-tracking was carried out for analysis of home-range, and MCP (Minimum Convex Polygon) was used for analysis. We analyzed 1 individual tracked 15 days (VT5) and 4 individuals which missing radio-tracking transmitter within 3 days (VT1~VT4). Home-range of VT5 gradually increased to 1,38ha, 1.42ha, 2.14ha in the order of early, middle, late period. On the other hand, moving distance was decreased to 174.558m 125.129m, 120.180m. Home-range of V1~VT4 was estimated as 0.81ha which was 75.3% share of home-range of VT5 in early period. As the result it was found that home-range is formed far apart from artificial nest that has been influenced by human being interference, thereafter gradually adapting to interference and spreading close to artificial nest. through this research, we can construct basic ecological data for protecting habitat of Parus varius varius and increasing life rate. As first radio-tracking study of Parus varius varius home-range in the post fledging period, it is expected to be useful for the future study of home-range.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1075-1083
• /
• 2016

Nowadays, the use of wireless input devices has been increasing on the basis of high convenience and portability. In particular the most widely used wireless keyboard and the mouse to use the 2.4 GHz frequency band, but due to the third party receives the electromagnetic wave from leaking when the radio equipment it is easy to obtain the personal information and the vulnerability is also being reported consistently. In this paper, implement a system to analyze and manipulate the packets of 2.4 GHz wireless keyboard and mouse using USRP device and GNU Radio package for verify the vulnerability of 2.4 GHz wireless keyboard and mouse. Using the construction system has attained a equipment specific address and key information by analyzing the communication protocol and the packet structure of the device was proved that a user can operate the PC to send the random key from long distance.