• Journal of Mechanical Science and Technology
• /
• v.20 no.2
• /
• pp.242-250
• /
• 2006

Detailed structures of the counterflow flames formed for different inlet fluid temperatures and different amount of additives are studied numerically. The detailed chemical reactions are modeled by using the CHEMKIN-II code. The discrete ordinates method and the narrow band based WSGGM with a gray gas regrouping technique (WSGGM-RG) are applied for modeling the radiative transfer through non-homogeneous and non-isothermal combustion gas mixtures generated by the counterflow flames. The results compared with those obtained by using the SNB model show that the WSGGM-RG is very successful in modeling the counterflow flames with non-gray gas mixture. The numerical results also show that the addition of $CO_2\;or\;H_2O$ to the oxidant lowers the peak temperature and the NO concentration in flame. But preheat of fuel or oxidant raises the flame temperature and the NO production rates. $O_2$ enrichment also causes to raise the temperature distribution and the NO production in flame. And it is found that the $O_2$ enrichment and the fuel preheat were the major parameters in affecting the flame width.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.103-109
• /
• 2013

Estimating the high tuber solids needs a simulation system on potato growth, and its development should be obtained by using agricultural elements which analyze the relationship between crop growth and agricultural factors. An accurate simulation to predict solids level against climatic change employs a calculation of in vivo energy consumption and bias for growth and induction shape in a slight environmental adaptation. So, to calculate in vivo energy consumption, this study took a concept of estimate of the amount of basal metabolism in each tuber. In the validation experiments, the results of measuring solid accumulation of potatoes harvested at dates suggested by simulation agreed with the actual measured values in each regional field during the growth period of years from 2006 till 2010. The mean values of tuber solids level and inter-annual level variation in validation experiments were predicted well by the simulation model. And also, the results of validation experiments represent that concentration of tuber solids were due mainly to the duration of sunshine, above 190 hours per a month, and the cumulative amount of radiation, above 2,200 $MJ{\cdot}m^{-2}$, of the effective growth period.

• Food Science and Biotechnology
• /
• v.15 no.3
• /
• pp.341-346
• /
• 2006

This study was performed to examine the effects of ${\gamma}$-irradiation on the volatile flavor compounds of dried leeks (Alliums tuberosum R.). Volatile compounds of dried leeks were extracted using simultaneous steam distillation and extraction (SDE), and analyzed by gas chromatography/mass spectrometry (GC/MS). Forty-one, 51, 45, and 42 compounds were tentatively identified in control, 1, 3, and 10 kGy irradiated samples, respectively. The constituents of flavor compounds in irradiated dried leeks were similar to non-irradiated samples. However, the intensities of the peaks were clearly different between them. Sulfur-containing compounds were detected as dominant compounds in all samples and their amounts decreased after ${\gamma}$-irradiation. ${\gamma}$-Irradiation reduced the total concentration of volatile compounds from leeks by 23.19, 15.09, and 30.23% at 1, 3, and 10 kGy doses, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.458-461
• /
• 2019

The facile synthesis of shape-controlled Pd nanoparticles (PdNPs) with ascorbic acid as a reducing agent and cetyltrimethylammonium bromide (CTAB) as a capping agent is presented in this study. The synthesized PdNPs were characterized by UV-vis spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman Spectroscopy. The prepared PdNPs show efficient surface-enhanced Raman scattering (SERS) properties. SERS studies on the adsorption characteristics of 1,4-phenylene diisocyanide (1,4-PDI) on colloidal PdNPs have revealed that the relative peak intensity of the $(NC)_{free}$ and $(NC)_{bound}$ modes distinctly depends on the 1,4-PDI concentration as well as the shape of the PdNPs. Furthermore, we found that the PdNPs are also efficient photoelectron emitters such that the SERS spectrum of 4-nitrobenzenethiol (4-NBT) on PdNPs is readily converted to that of 4-aminobenzenethiol (4-ABT) under 632.8 nm radiation.

• Solar Energy
• /
• v.20 no.1
• /
• pp.91-96
• /
• 2000

This study was performed to find out how much experimental factors influence on regeneration performance in a solar air conditioning system. The experimental apparatus was set up in a climate-controlled chamber where temperature and humidity could be kept constant. In order. to investigate factors' influence on the regeneration performance of the solar air conditioning system, the model experiment was done using the 600mm $\times$ 600mm black painted aluminum regenerator. The design and analysis of experiment were done by the design of experiments, especially the table of orthogonal arrays. In order to find out how much experimental factors influence on regeneration performance, the table of orthogonal arrays $L_8(2^7)$ was used. According to the results, it was found that the most influential factor to affect regeneration performance was the concentration of LiCl solution. The next influential factors were a solar radiation, an air velocity, and the temperature of LiCl solution in order.

• Nuclear Engineering and Technology
• /
• v.42 no.4
• /
• pp.434-441
• /
• 2010

The activation products of aluminum and argon are key radionuclides for operational and environmental radiological safety during the normal operation of open-tank-in-pool type research reactors using aluminum-clad fuels. Their activities measured in the primary coolant and pool surface water of HANARO have been consistent. We estimated their sources from the measured activities and then compared these values with their production rates obtained by a core calculation. For each aluminum activation product, an equivalent aluminum thickness (EAT) in which its production rate is identical to its release rate into the coolant is determined. For the argon activation calculation, the saturated argon concentration in the water at the temperature of the pool surface is assumed. The EATs are 5680, 266 and 1.2 nm, respectively, for Na-24, Mg-27 and Al-28, which are much larger than the flight lengths of the respective recoil nuclides. These values coincide with the water solubility levels and with the half-lives. The EAT for Na-24 is similar to the average oxide layer thickness (OLT) of fuel cladding as well; hence, the majority of them in the oxide layer may be released to the coolant. However, while the average OLT clearly increases with the fuel burn-up during an operation cycle, its effect on the pool-top radiation is not distinguishable. The source of Ar-41 is in good agreement with the calculated reaction rate of Ar-40 dissolved in the coolant.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.3
• /
• pp.251-268
• /
• 1986

Selecting a site for the safe disposal of radioactive waste requires the evaluation of a wide range of geologic, mineralogic, hydrologic, and physicochemical properties. Although highly diverse, these properties are in fact interrelated. Site requirements are also diverse because they are influenced by the nature of the radionuclides in the waste, for example, their half-lives, specific energy, and chemistry. A fundamental consideration in site selection is the mineralogy of the host rock, and one of the most ubiquitous mineral groups is clay minerals. Clays and clay minerals as in situ lithologic components and engineered barriers may playa significant role in retarding the migration of radionuclides. Their high sorptivity, longevity (stability), low permeability, and other physical factors should make them a very effective retainer of most radionuclides in nuclear wastes. There are, however, some unanswered questions. For example, how will their longevity and physicochemical properties be influenced by such factors as radionuclide concentration, radiation intensity, elevated temperatures, changes in redox condition, pH, and formation fluids for extended periods of time? Understanding of mechanisms affecting clay mineral-radionuclide interactions under prevailing geochemical conditions is important; however, the utilization of experimental geochemical information related to physicochemical properties of clays and clay-bearing materials with geohydrologic models presents a uniquely challenging problem in that many assessments have to be based on model predictions rather than on experiments. These are high-priority research investigations that need to be addressed before complete reliance for disposal area performance is made on clays and clay minerals.

• Natural Product Sciences
• /
• v.27 no.3
• /
• pp.161-168
• /
• 2021

The chemical investigation of the 90% EtOH extract from Cicadidae Periostracum led to the isolation and identification of seven known N-acetyldopamine dimers (1-7). These compounds were identified by comparing mass spectrometry data and NMR spectroscopic data with those previously reported. In this study, complete interpretation of 1D and 2D NMR data of 1 and 2 were reported for the first time. In addition, compounds 3 and 4 were isolated from this material for the first time. All isolates were obtained as racemic mixtures, as confirmed by chiral HPLC. Furthermore, we evaluated the neuroprotective activities of compounds 1-7 and found that compounds 1, 5, and 6 significantly attenuated rotenone-induced death of SH-SY5Y neuroblastoma cells at a concentration of 100 μM. Parallel to this result, compounds 3 and 6 displayed antioxidant effects in the cytoplasm, as determined by CM-H2DCFDA fluorescence intensity, while compounds 1 and 5 showed antioxidant effects in the mitochondria, as assessed by MitoSox fluorescence intensity. Overall, these results suggest that some of these compounds protect neuroblastoma cells by ameliorating the release of reactive oxygen species. Further studies are warranted to elucidate the underlying mechanisms by which these compounds exhibit antioxidant and neuroprotective actions.

• Current Optics and Photonics
• /
• v.5 no.2
• /
• pp.164-172
• /
• 2021

In this paper a catadioptric laser-irradiation-precision test system is designed, to achieve a high-precision laser-irradiation-accuracy test. In this system, we adopt the method of imaging the entire target surface at a certain distance to realize the measurement of laser-irradiation precision. The method possesses the advantages of convenient operation, high sensitivity, and good stability. To meet the test accuracy requirement of 100 mm/km (0.01%), the coma, field curvature, and distortion over the entire field of view should be eliminated from the optical system's design. Taking into account the whole length of the tube and the influence of stray light on the structure type, a catadioptric system with a hood added near the primary imaging surface is designed. After optimization using the ZEMAX software, the modulation transfer function (MTF) of the designed optical system is 0.6 at 30 lp/mm, the full-field-of-view distortion is better than 0.18%, and the energy concentration in the 10-㎛-radius surrounding circle reaches about 90%. The illumination-accuracy test results show that the measurement accuracy of the radiation hit rate is better than 50 mm when the test distance is 1 km, which is better than the requirement of 100 mm/km for the laser-irradiation-accuracy test.

• Journal of Sensor Science and Technology
• /
• v.28 no.5
• /
• pp.305-310
• /
• 2019

The purpose of this study is to classify the concentration of HbA1c (glycosylated hemoglobin), which is an indicator in the management of accurate blood glucose level in diabetic patients, using a non-invasive optical property measurement method. To measure the optical properties of HbA1c, the optical source uses LEDs and laser diodes of 400 nm in the visible region and 1450 nm in the nearinfrared region using thermopile to detect the Raman scattering intensity. An HbA1c control solution was used. As a result, the optical properties of 5% (normal) and 9% (abnormal) HbA1c control solutions showed specificity in which the output values were reversed at 850 nm and 950 nm, respectively. This property was applied to distinguish between normal and abnormal values in diabetes. In addition, considering tissue penetration depths for non-invasive measurements, two wavelengths were determined to be effective in distinguishing the concentrations of HbA1c control solutions at 5%, 7%, and 9%.