Current Optics and Photonics

Optical Society of Korea (한국광학회)
권호 표지
DOI QR코드

DOI QR Code

A Miniaturized Catadioptric Laser-Irradiation-Precision Test System

  • Liu, Huan (College of Optoelectronic Engineering, Changchun University of Science and Technology) ;
  • Sun, Hao (College of Optoelectronic Engineering, Changchun University of Science and Technology) ;
  • Wang, Chunyan (College of Optoelectronic Engineering, Changchun University of Science and Technology)
  • Received : 2020.10.27
  • Accepted : 2020.12.11
  • Published : 2021.04.25
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper a catadioptric laser-irradiation-precision test system is designed, to achieve a high-precision laser-irradiation-accuracy test. In this system, we adopt the method of imaging the entire target surface at a certain distance to realize the measurement of laser-irradiation precision. The method possesses the advantages of convenient operation, high sensitivity, and good stability. To meet the test accuracy requirement of 100 mm/km (0.01%), the coma, field curvature, and distortion over the entire field of view should be eliminated from the optical system's design. Taking into account the whole length of the tube and the influence of stray light on the structure type, a catadioptric system with a hood added near the primary imaging surface is designed. After optimization using the ZEMAX software, the modulation transfer function (MTF) of the designed optical system is 0.6 at 30 lp/mm, the full-field-of-view distortion is better than 0.18%, and the energy concentration in the 10-㎛-radius surrounding circle reaches about 90%. The illumination-accuracy test results show that the measurement accuracy of the radiation hit rate is better than 50 mm when the test distance is 1 km, which is better than the requirement of 100 mm/km for the laser-irradiation-accuracy test.

Keywords

References

  1. X. Zhuang and Z. Chen, "Current status and its developing trend of semiactive laser guided weapon," Ship Electron. Eng. 31, 6-10 (2011).
  2. D. Jeong, J. H. Lee, H. Jeong, C. M. Ok, and H.-W. Park, "Infrared dual-field-of-view optical system design with electrooptic/laser common-aperture optics," Curr. Opt. Photon. 2, 241-249 (2018). https://doi.org/10.3807/COPP.2018.2.3.241
  3. X. Li, L. Zhang, H. Zhang, and L. Hu, "Technology of high precision test for laser spot based on double CCD detection in the outfield," Infrared. Laser Eng. 44, 59-64 (2015).
  4. X. Y. Zhang, "Design of visible, infrared dual-channel optical system for space target detection," in Proc. International Conference on Electronics and Optoelectronics (Dalian, China, July. 2011). pp. V2-163-V2-165.
  5. Z. Liu and F. Yu, "Aberration correction method for the catadioptric imaging system design," Appl. Opt. 55, 2943-2950 (2016). https://doi.org/10.1364/AO.55.002943
  6. Y. Kang and W. Liu, "A refract-reflect telescope with Cooke as compensated lens," Opt. Precision Eng. 3 (2007).
  7. D. Ma, "Recommended conceptual optical system design for China's Large Optical-infrared Telescope (LOT)," Opt. Express 26, 108-119 (2018). https://doi.org/10.1364/OE.26.000108
  8. D.-Q. Su, M. Liang, X. Yuan, H. Bai, and X. Cui, "The optical system of the proposed Chinese 12-m optical/infrared telescope," Mon. Not. R. Astron. Soc. 469, 3792-3801 (2017). https://doi.org/10.1093/mnras/stx956
  9. Q. Xue, "Optical design and stray light analysis for large aperture catadioptric star sensor," Acta Opt. Sin. 36, 0222 001 (2016). https://doi.org/10.3788/AOS201636.0222001
  10. W. Wang and X. Yang, "Stray light analysis of catadioptric infrared optical system with large field," Infrared Laser Eng. 42, 138-142 (2013).
  11. C. Wang, M. Wang, Q.-C. Zhou, L. Wang, and Z.-K. Bao, "Real-time test system for long range moving targets," J. Appl. Opt. 32, 709-713 (2011). https://doi.org/10.3969/j.issn.1002-2082.2011.04.023