• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.413-413
• /
• 2020

Godunov형 모형을 이용한 홍수모델링에서는 일반적으로 구조적 사각격자나 비구조적 삼각격자가 주로 적용된다. 2차원 수치모형을 이용한 홍수모델링에서 연구유역의 정보가 격자의 노드나 중심에 입력되므로 적용격자의 유형과 생성방법에 따라 모형의 입력자료 오차에 영항을 줄 수 있다. 따라서, 연구유역이 지형 변동성이 심한 지역이거나 흐름형상이나 흐름변동이 심한 구간이라면, 고해상도 격자를 통해 모형의 입력자료 오차를 최소화할 할 수 있다. 본 연구에서는 2가지 유형에 대한 연구를 수행하였다, 첫 번째는 홍수해석을 위한 2차원 모형의 격자형상과 해상도에 따른 홍수위 및 홍수범람범위를 비교·분석하는 연구를 수행하였다. 연구유역은 2000년 10월 29일부터 11월 19일까지 홍수가 발생한 영국의 Severn 강 유역이다. 연구유역의 홍수 모델링을 위한 지형자료는 3m 해상도의 LiDAR(Light Detection And Ranging)를 이용하여 구축하였으며, 격자유형 및 해상도에 따른 2차원 홍수위 및 홍수범람범위를 비교·분석하기 위해서 홍수 발생기간 동안 촬영된 4개(2000년 8월 11, 14, 15, 17일)의 ASAR(Advanced Synthetic Aperture Radar) 영상자료를 활용하였다. 즉, ASAR 영상으로 촬용된 최대범람시기 및 홍수류의 배수기를 활용하여 최대범람범위뿐만 아니라 홍수가 증가하는 시기와 하류단 배수로 인해 홍수가 감소하는 시기를 모두 포함하는 홍수범람범위에 대한 격자유형별 2차원 홍수범람모형의 계산 결과에 대해 비교하였다. 두 번째는 아마존 강 중류유역의 2,500K㎡ 면적에 해당하는 대규모 유역에 대해 SRTM(Shuttle Radar Topography Mission) 지형자료를 이용하여 홍수기와 갈수기에 대해 2차원 모델링을 수행하고 그 결과를 위성자료와 비교하였다.

• Journal of Environmental Science International
• /
• v.19 no.12
• /
• pp.1361-1374
• /
• 2010

The impact of urbanization on local meteorology (e.g., surface temperature, PBL height, wind speed, etc.) in the Greater Seoul Area (GSA) was quantitatively evaluated based on a numerical modeling approach during a 1-month period of 2001 (9 Sep. through 8 Oct. 2001). The analysis was carried out by two sets of simulation scenarios: (1) with the global land use and topographic data from the U.S. Geological Survey (USGS) in 1990s (i.e., LU-USGS case) and (2) with the land use data from the Environmental Geographic Information System (EGIS) along with the 3 sec elevation data from the Shuttle Radar Topography Mission (SRTM) in 2000s (i.e., LU-EGIS case). The extension of urban areas in the GSA (especially, the southern parts of Seoul) accounted for 1.8% in the LU-USGS case and 6.2% in the LU-EGIS case. For the simulations, the surface temperature and PBL height due to urbanization in the LU-EGIS case was higher (the differences of up to $0.1^{\circ}C$ and 36 m, respectively) than those in the LU-USGS case, whereas the wind speed (up to 0.3 $ms^{-1}$) in the former was lower than that in the latter at 1500 LST. The increase in surface temperature due to urbanization in the GSA (especially, the southern parts of Seoul) was led to the strong convergence of air masses, causing the early sea breeze and its rapid propagation to inland locations. In addition, the vertical mixing motion in the extended urban areas for the LU-EGIS case was predicted to be stronger than that for the LU-USGS case and vice versa for the original urban areas.

• Journal of Environmental Science International
• /
• v.23 no.11
• /
• pp.1919-1927
• /
• 2014

In order to decide the location of appropriate onshore wind farm with higher potential wind energy, several decision processes using Geographic Information System (GIS) including Digital Elevation Map (DEM) were proposed and we also estimated the wind resources through the proposed decision process. Decision process consists with three steps. First step is excluding inappropriate location geographically using DEM data including SRTM (Shuttle Radar Topography Mission) terrain data, landslide, land-use, roadway, and forest road data. And the second step of decision process is consideration of the difficulty caused by the natural environmental problem. This step is carried out using ECVAM (Environmental Conservation Value Assessment Map) data. And final step is determination of the most suitable location through the Moving Suitability Identification Method (MSIM) based on the moving potentially estimated wind resources area. Proposed decision process was applied over the Korean Peninsula. Wind resource potential estimated by the first and the second step is cases shows 35.09 GW and 7.17 GW, respectively, and the total evaluated energy from the all proposed step were 0.43 GW and 1.87 GW for the 3 km and 1.5 km geographical grid size, respectively.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.449-451
• /
• 2007

In the commercially managed timber lands, the information such as height, age, stand density, canopy closure and leaf area index need to be collected periodically. Stand volume is the most fundamental information in the valuation of timber, however, stand age information is the primary element of forest inventory and these two are highly correlated. Conventional method of collecting stand age information by field surveys such as ring count method is accurate; however, it is expensive, labor-intensive and time consuming. In the present study it was aimed to collect stand age information using modem techniques in a commercially managed timberland situated in Tennessee, USA. The Landsat Thematic Mapper (TM), Enhanced Thematic Mapper (ETM+) of three different periods, Shuttle Radar Topography Mission (SRTM), National elevation dataset (NED) and field inventory data were used. Normalized difference vegetation index (NDVI) and Tasselled Cap (TC) transformation techniques were applied on the TM and ETM+ data. The regression analysis was carried out to identify the correlation between stand age and NDVI, TC. In the present study about 2,469 datasets were analyzed. The $R^{2}$ value for stand age estimation was 0.713. The NDVI, TC2 and TC3 were found to produce accurate timber age information.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.4
• /
• pp.15-27
• /
• 2015

The objectives of this study are to analyze the quantitative ecological principal components of Korean Peninsula using the multivariate spatial environmental datasets and to compare the ecological difference between South and North Korea. Ecological maps with GIS(Geographical Information System) are constructed by PCA(Principal Component Analysis) based on seventeen raster(cell based) variables at 1km resolution. Ecological differences between South and North Korea are extracted by Factor Analysis using ecosystem maps masked from Korean ones. Spatial data include SRTM(Shuttle Radar Topography Mission), Temperature, Precipitation, SWC(Soil Water Content), fPAR(Fraction of Photosynthetically Active Radiation) representing for a productivity, and SR(Solar Radiation), which all cover Korean peninsula. When it performed PCA, the first three scores were assigned to red, green, and blue color. This color triplet indicates the relative mixture of the seventeen environmental conditions inside each ecological region. The first red one represents for 'physiographic conditions' worked by high elevation and solar radiation and low temperature. The second green one stands for 'seasonality' caused by seasonal variations of temperature, precipitation, and productivity. The third blue one means 'wetness condition' worked by high value such as precipitation and soil water contents. FA extraction shows that South Korea has relatively warm and humid ecosystem affected by high temperature, precipitation, and soil water contents whereas North Korea has relatively cold and dry ecosystem due to the high elevation, low temperature and precipitation. Results would be useful at environmental planning on inaccessible land of North Korea.

• Korean Journal of Remote Sensing
• /
• v.21 no.1
• /
• pp.73-81
• /
• 2005

We construct improved geocentric digital elevation model (DEM), estimate tidal dynamics and ice stream velocity over Sulzberger Ice Shelf, West Antarctica employing differential interferograms from 12 ERS tandem mission Synthetic Aperture Radar (SAR) images acquired in austral fall of 1996. Ice, Cloud, and land Elevation Satellite (ICESat) laser altimetry profiles acquired in the same season as the SAR scenes in 2004 are used as ground control points (GCPs) for Interferometric SAR (InSAR) DEM generation. 20 additional ICESat profiles acquired in 2003-2004 are then used to assess the accuracy of the DEM. The vertical accuracy of the OEM is estimated by comparing elevations with laser altimetry data from ICESat. The mean height difference between all ICESat data and DEM is -0.57m with a standard deviation of 5.88m. We demonstrate that ICESat elevations can be successfully used as GCPs to improve the accuracy of an InSAR derived DEM. In addition, the magnitude and the direction of tidal changes estimated from interferogram are compared with those predicted tidal differences from four ocean tide models. Tidal deformation measured in InSAR is -16.7cm and it agrees well within 3cm with predicted ones from tide models. Lastly, ice surface velocity is estimated by combining speckle matching technique and InSAR line-of-sight measurement. This study shows that the maximum speed and mean speed are 509 m/yr and 131 m/yr, respectively. Our results can be useful for the mass balance study in this area and sea level change.

• Korean Journal of Remote Sensing
• /
• v.34 no.3
• /
• pp.439-450
• /
• 2018

The lineament is a linear or curved terrain element to discriminate adjacent geological structures in each other. It has been widely used for analysis of geology, mineral exploration, natural disasters, and earthquake, etc. In the past, the lineament has been extracted using cartographic map or field survey. However, it is possible to extract more efficiently the lineament for a very wide area thanks to development of remote sensing technique. Remotely sensed observation by aircraft, satellite, or digital elevation model (DEM) has been used for visual recognition for manual lineament extraction. Automatic approaches using computer science have been proposed to extract lineament more objectively. In this study, we evaluate the characteristics of lineament which is automatically extracted with respect to difference of spatial resolution of DEM. We utilized two types of DEM: one is Shuttle Radar Topography Mission (SRTM) with spatial resolution of about 90 m (3 arc sec), and the other is the latest world DEM of TerraSAR-X add-on for Global DEM with 12 m spatial resolution. In addition, a global DEM was resampled to produce a DEM with a spatial resolution of 30 m (1 arc sec). The shaded relief map was constructed considering various sun elevation and solar azimuth angle. In order to extract lineament automatically, we used the LINE module in PCI Geomatica software. We found that predominant direction of the extracted lineament is about $N15-25^{\circ}E$ (NNE), regardless of spatial resolution of DEM. However, more fine and detailed lineament were extracted using higher spatial resolution of DEM. The result shows that the lineament density is proportional to the spatial resolution of DEM. Thus, the DEM with appropriate spatial resolution should be selected according to the purpose of the study.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.2
• /
• pp.34-43
• /
• 2018

DEM(Digital Elevation Model) being fundamental data in geospatial domain is produced from different data and using various methods. As they are derived their precision varies and altering derivative in application. In this work, we compare two widely used DEMs namely(Advanced Land Observing Satellite World 3D 30m and Shuttle Radar Topography Mission Global 30m) around coastal islands in Gyeongsangnam-do, South Korea. First statistics of each DEM were calculated and later overlapped in Landsat image for visual comparison of areas below and above zero-meter elevation. As a result, it was found that DEMs were highly correlated with each other and had similar statistics. Besides having few high differences in hilly land area, they were able to represent the coastal lines. It has also been noted that they have many negative values and should carefully select study area covering full watershed in coastal regions to avoid negative elevation even after filling the sinks.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.89-99
• /
• 2015

Recently, our construction industry is actively participating in numerous city planning projects in the third world countries. Considering the current depression of domestic real estate market, the emerging foreign demands could certainly provide substantial opportunities for the domestic industry to overcome the trough. For the field planners dealing with such foreign projects, though, the immediate problem is the lack of public statistics and geographic information to perform spatial analyses and/or prepare master plans. This study, in this context, tries to simulate a process to construct a digitized basemap of the case area, 'Bab Ezzouar,' in Algeria of Northern Africa. The area is a typical municipality that lacks the IT databases. To overcome the data shortage, the study uses the satellite map tiles so as to digitize the roads and building structures. It then estimates the block-wise populations based on the building image interpolation as well as the supplementary field survey data. The topographic TINs are also built by the SRTM (Shuttle Radar Topography Mission) digital elevation maps so that the three-dimensional configuration of the structures and terrains are rendered to check the urban scenery and skylines.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.3
• /
• pp.246-260
• /
• 2014

A 90-m horizontal-resolution numerical model was configured to study the micrometeorological features of local winds in the valley of Gwangneung KoFlux (Korea Flux network) Sites (GDK: Gwangneung Deciduous forest site in Korea, GCK: Gwangneung Coniferous forest site in Korea) during summer days. The U. S. Geological Survey (USGS) Shuttle Radar Topography Mission (SRTM) data were employed for high-resolution model terrain height. Model performance was evaluated by comparing observed and simulated near-surface temperature and winds. Detailed qualitative analysis of the model-simulated wind field was carried out for two selected cases which are a clear day (Case I) and a cloudy day (Case II). Observed winds exhibited that GDK and GCK, as well as Case I and Case II, had differences in timing, duration and strength of daytime and nighttime wind direction and speeds. The model simulation results strongly supported the existence of the drainage flow in the valley of the KoFlux tower sites. Overall, the simulated model fields realistically presented the diurnal cycle of local winds in and around the valley, including the morning drainage-upslope transition and the evening reversal of upslope wind. Also, they indicated the complexity of local winds interactions by presenting that daytime westerly winds in the valley were not always pure mountain winds and were often coupled with larger-scale wind systems, such as synoptic-scale winds or mesoscale sea breezes blowing from the west coast of the peninsula.