• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.247-250
• /
• 2004

Tracking systems for launch vehicle consist mainly of radar transponder (beacon), RF switch or power divider, antennas as onboard system, and single or multiple radars as ground one. In this paper, tracking systems, which are applicable to KSLV (Korea Space Launch Vehicle)-l, are introduced and the electrical performances for developed prototypes are presented. We have also performed RF link analysis for both uplink and downlink, and estimated that the maximum distance to be able to track KSLV-l stably is dependent on uplink characteristic in our system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.737-747
• /
• 2013

A 3-D surveillance radar is a pulsed-doppler radar to provide various target information, such as range, doppler and angle by performing TWS. This paper introduces HW/SW architecture of radar signal processing board to process in real-time using high-speed multiple DSP(Digital Signal Processor) based on COTS. Moreover, we introduced a implemented algorithm consisted of clutter map creation/renewal, FIR(Finite Impulse Response) filter for rejection of zero velocity components, doppler filter, hybrid CFAR and finally presented computational burden of each algorithm by performing operational test using a beacon.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.571-576
• /
• 2015

This paper presents a comparative study of wave height estimation method that was used for signal to noise ratio and shadowing ratio based on X-band marine radar. If the signal to noise ratio, and is widely used as a method for estimating an wave height, a new method is presented for shadowing ratio. In the case of radar images used in this study it is measuring the data from the coast of Ulsan Jujeon, compared with marine meteorological information from the Meteorological Agency measured a light beacon. We compared the measured data for about 34 days, the typhoon was measured, incluidng a period in the East Sea, and verify the results for various distribution of wave height. For estimate wave height using a shadowing ratio analysis, it does not require calibration and real-time advantages of this part, coming confirmed the possibility of the measurement, the cause detection error for radar image was caused due to determine.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.75-79
• /
• 2007

Satellite imagery was applied to locating archeological sites and remains around northeastern areas of China, called as Manchuria, and Korean peninsular, such as Mountain Fortress of Goguryeo Dynasty era($37BC{\sim}771AD$), and firing torch and smoke beacon signal sites at mountain tops in Josun Dynasty era($1392{\sim}1910AD$) as well as burial sites below the ground level in the modern era. Information on archeological sites, fire posts and burial places could be found in various literatures, but real figures of such cultural assets have been disappearing due to land development programs and human activities in recent years. Some of these historical sites were identified in satellite images using GPS(Geographical Positioning System). Real locations of these sites would be further necessary to be verified.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.348-356
• /
• 2014

The existing effective path-length model of ITU-R has some drawbacks: The prediction error is quite large compared to domestic measurement data and it is an empirical model in which the physical characteristics of rain cells are not considered. In this paper, a theoretical model for effective path-length using the rain-cell concept was proposed and its validity was verified using the measurement data. To analyze the statistical characteristics of rain cell parameters, the weather-radar data(CAPPI) measured by Korea Meterological Administration were analyzed and the correction factor was properly introduced to fit the Chollian beacon measurement data of ETRI(Electronics and Telecommunications Research Institute). To verify the proposed effective path-length model, it was compared with the Mugunghwa No. 5 beacon data measured in Chungnam National University with the support of ADD(Agency for Defense Development). It was confirmed that the prediction results of the proposed model are in good agreement with the measurement data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.572-580
• /
• 2015

RF skin tracking of instrumentation RADAR cannot acquire stable track data, because of effect of multipath interference especially elevation direction. In this paper, low altitude target tracking method using laser tracking system is suggested to overcome this restriction. The effect of multipath can be reduced by increasing angle resolution with laser characteristics of very short pulse and narrow beamwidth. RF skin track, beacon track and laser track data for the integrated calibration target on the ground and target ship on the sea are gathered. And they are compared and analyzed to confirm the performance of laser tracking system. As a result, it shows that the suggested laser track method has better performance than RF skin track under multipath conditions.

• Journal of the Korean Institute of Navigation
• /
• v.3 no.1
• /
• pp.47-77
• /
• 1979

A microwave Navigational Aid system is suggested suitable for fishing boats too small to be equipped with Radar or Radio-Direction-Finder. The system proposed here is similar to that of Talking-Beacon developed in Japan, but the distinctive modification proposed is that an increase of sixteen times in peak transmitting power, thus an accompanying increase of coverage, is achieved with the same mean transmitting power as that of Japan without sacrificing the clearness of azimuth information, by adopting a pulse repetition modulation instead of pulse width modulation as in Japan system. An experimental land station transmitter of transmitting frequency of 9, 370MHz and of peak power of 35kw with a microwave beam of 1 degree in horizontal width and 7 degrees in vertical width rotating once every three minutes, and also an experimental receiver of 20-dB in sensitivity and of an assumed cost of 100 dollars, operated by a 12 volts battery source are made, and the sail test results are reported showing that a bearing infromation of an accuracy of within two degrees can be obtainable every three minutes at a distance of as far as 24 miles from the transmitter if the transmitter is located as high as 100 meters above sea-level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1925-1933
• /
• 2015

RFID based applications that combine radar techniques to obtain the location and the ID of a tag have widely been investigated. In this paper, we analyze a recently proposed RFID system that can extract the tag IDs and their velocities using signals transmitted from the tag attached moving objects and verify its performance. In the proposed system, a beacon transmits triggering signal at regular intervals into a monitoring area and the tag receiving the triggering signal backscatters the FMCW(frequency modulation continuous wave) signal modulated by the tag ID. The reader system demodulates this FMCW signal using predefined two reference signals to obtain not only the tag ID but its velocity. In this paper, we show that the proposed system works properly and analyze the degree of performance degradation in cases when the synchronization error between the transmitting signal and the reference signal occurs, and even when sampling rate is lowered for implementation purpose. Finally, the analytical results are verified by simulation.