• 한국수자원학회논문집
• /
• 제53권8호
• /
• pp.569-582
• /
• 2020

최근 우리나라는 도시화로 인해 수자원이용 환경이 급격한 변화를 맞이하였으며, 이로 인해 유출현상을 정량적으로 규명하여 가용수자원을 최적배분 하는데 어려움이 발생하고 있다. 이를 대비하기 위하여 국가물관리계획, 하천유역수자원관리계획 등이 제안되고 있으며, 효율적인 수자원 운영 계획 수립을 위해서는 정확하며 상세한 물수지 분석이 요구되고 있다. 그러나 기존에 수행되는 물수지 분석은 유역의 물순환 상황을 충분히 반영하지 못하며, 이러한 결과는 의사결정 측면에서 활용이 어려운 실정이다. 이러한 점에서 본 연구에서는 유역을 공간적으로 상세화하여 하천을 네트워크 형태로 재구성, 실적기반 자료를 반영한 물순환 모델을 개발하였으며, 하천을 중심으로 모니터링 지점의 유량정보가 준실시간으로 제공될 수 있는 체계를 마련하였다. 본 연구에서 개발된 물순환 모델은 기존 물수지 분석에서 나타나는 문제점을 개선하는데 목적이 있으며, 계측유역을 대상으로 모형의 적합성을 평가한 결과 특히 저유량 부분에서 기존 모형에 비해 크게 개선된 효과를 확인할 수 있었다. 본 연구에서 개발된 물순환 모델은 보다 정확한 자연유량 보정기법 적용과 유역 내 상세화된 유역네트워크를 통해 유량정보를 준실시간으로 제공함으로써 보다 현실적인 가뭄 모니터링 및 가뭄대책을 마련하기 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• 간호행정학회지
• /
• 제8권2호
• /
• pp.295-308
• /
• 2002

Purpose: The purpose of this quasi-experimental research is to develop the CP for primary THR patients and verify its effectiveness. Method: The CP is designed for both patients and medical employees to meet the 14-day-long hospitalization with an expert and clinical validity test, and the standardized orders are also created. 21 eligible subjects for the control group(with common care plan) and 27 subjects for the experimental group(with CP service) were assigned. Data were collected from questionnaires to evaluate patients' satisfaction level of nursing care and CP, investigation of physical complications, inspection of LOS(length of hospital stay) and hospital charges from April 2000 to February 2001 at K-hospital in Daegu. The collected data were analyzed by using the SAS program. Results: After implementation of CP, there was a statistically significant reduction in mean length of stay. The hospital charges have no considerable difference between two groups. Frequency of physical complications is reduced considerably. The experimental group scored much higher than the control group on the satisfaction level toward nursing care. And in the analysis of CP satisfaction questionnaires, many subjects have high satisfaction in items of 'I see the treatment process and hospital life', 'I feel that I am participating in my treatment process with health care staff'. The analysis of variances which cause a prolonged LOS supports that it's necessary to strengthen an evaluation of pre-operative outpatients' condition and link the home nursing care system in discharge for more shortening of LOS. Conclusion: The above results show that CP can have a positive impact on satisfaction level of inpatients with primary THR and the hospital.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.871-876
• /
• 2001

Recent earthquakes in California and Japan caused extensive damage to highway bridge structures. It is also thought that during probable earthquakes bridge structures in Korea could be failed due to the structural deficiencies, which were nonseismically designed and constructed before 1992. In these regards, innovative strengthening methods have been developed to repair reinforced concrete bridge columns, especially by glassfiber sheet bonding methods which are widely used today. The primary objective of this research is to investigate the seismic behavior of RC bridge columns retrofitted with composite straps and to propose pertinent guidelines of repair and rehabilitation method for earthquake resistant design procedure of RC bridges which are located in low or moderate seismicity regions. Six scaled-down concrete test specimens were made with test variables such as lap splice ratio, axial force ratio, confinement ratio, composite straps in the plastic hinge region. Pertinent design guidelines could be developed for the earthquake resistant design of RC bridge piers retrofitted with glassfibers in low or moderate seismic region.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.346-347
• /
• 2011

본 논문에서는 정전류 LED조명 구동을 위한 일차측 전류 제어의 새로운 기법을 제안한다. 일정한 온-타임으로 동작하는 경계 모드(Critical Mode) 플라이백 타입으로 우수한 역률을 달성하였고, 의사 공진(Quasi-resonant) 동작으로 스위칭 손실을 최소화 하였다. 본문에서 LED전류가 5% 이하로 정전류 제어되는 9W급 플라이백 타입의 일차 측 전류 제어 기법을 실험으로 검증한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.639-642
• /
• 2002

A tubular centrifugal fin is designed by using various methods of analysis and design. A preliminary design method based on empirical optimum curves for centrifugal fin is used to determine the geometric parameters for tubular centrifugal fan. And, Quasi-3D streamline curvature duct-flow analysis is used to provide the primary position of streamlines and spanwise distribution of flow angle f3r generation of blade geometry based on S1 surface. Three-dimensional CFD solution then is obtained to optimize the blade design. Constriction of flow path in the region of impeller, backward swept blade, and central cone, which are introduced to improve the design, successfully remove or suppress the vortices downstream of the impeller.

• 산업기술연구
• /
• 제16권
• /
• pp.131-137
• /
• 1996

For a large scale civil and architectural structures, mainly steel, concrete and aluminum have been used and weight and corrosion of materials became a major concern. Designing with composite materials is very much complicated. Simple classical theory may yield good results for selecting "initial" sections for preliminary design. D. H. Kim proposed to use the quasi-isotropic constants by Tsai for the preliminary design of the composite primary structures for the civil construction. Also he made simple equation using correction factor. In this paper, the simple formulas developed by D. H. Kim to obtain "exact" values of the natural frequencies of [ABBCAAB]r laminate are compared with Whitney's equations. Also natural frequencies of the plate with varying aspect ratios and reinforcing fiber orientations, are compared with natural frequencies of bean. This work can be a guideline to obtain data in many other cases.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1774-1783
• /
• 1998

The transition from steady laminar to chaotic convection in a glass melting furnace specified by upper surface temperature distribution has been studied by the direct numerical analysis of the two and three-dimensional time dependent Navier-Stokes equations. The thermal instability of convection roll may take place when modified Rayleigh number($Ra_m$) is larger than $9.71{\times}10^4$. It is shown that the basic flows in a glass melting furnace are steady laminar, unsteady periodic, quasi-periodic or chaotic flow. The dimensionless time scale of unsteady period is about the viscous diffusion time, ${\tau}_d=H^2/{\nu}_0$. Through primary and secondary instability analyses the fundamental unsteady feature in a glass melting furnace is well defined as the unsteady periodic or weak chaotic flow.

• Journal of Mechanical Science and Technology
• /
• 제14권5호
• /
• pp.562-568
• /
• 2000

The pressure in a water-entry induced cavity, is analyzed up to the closed cavity (bubble). Water-entry is a highly transient phenomenon, and the evolution of the water-entry cavity must be explained by considering the entry speed, shape of the solid body, atmosphere pressure, and cavity pressure as the primary variables. This work is an extension of the cavity dynamics model recently reported by Lee (l997a). To extend the model for a wide range of entry speeds the cavity pressure is calculated from a one-dimensional quasi-steady flow model. The estimation of the cavity pressure allows us to explain the experimentally observed surface closure phenomena at low entry speeds. Predictions for the time of surface closure are compared with the published experimental data.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.499-502
• /
• 2004

Multi-server Markovian retrial model with heterogeneous servers is analyzed. Arriving customers constitute the MMAP(Marked Markovian Arrival Process). Distribution of the primary customers among the servers is performed randomly depending on the type of a customer and the number of the server. Customers from the orbit have the exponential service time distribution with a parameter depending on the server only. The choice of the server for a retrial is made randomly as well. Multidimensional continuous time Markov chain describing operation of the model is investigated by means of reducing to asymptotically quasi-toeplitz Markov chaius.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.38-43
• /
• 2007

Owing to the rapid progress in manufacturing technology of microscale devices, there are active research works in developing microscale propulsion systems. In this study, gas flows in nozzles with size of milli and sub-millimeter are investigated by using a CFD code based on the Navier-Stokes equations. The prediction results were compared with theoretical results of quasi-one-dimensional nozzle flow and experiment data. In general, theoretical values agree very well with the CFD results. However, theoretical values begin to deviate from the CFD and experimental data for relatively small Reynolds numbers and the nozzle shape with rectangular cross section. The primary reason for this discrepancy is due to the existence of the thick boundary layer at the wall in low Reynolds flows.