• 정보관리학회지
• /
• 제28권1호
• /
• pp.309-326
• /
• 2011

기존 메타데이터의 품질 측정 방법은 오류가 발생한 레코드를 단순히 계수하여 그 비율로 품질을 측정하였다. 이러한 한계를 극복하기 위해 메타데이터 요소별로 상대적 중요 정도를 나타내는 가중치를 적용함으로서, 메타데이터 품질을 체계적으로 계량화 하는 측정 방법을 제시하고자 하였다. 구체적인 가중치 부여 방법으로 엔트로피, 이용자 과업, 그리고 이용 통계를 활용하였다. 또한 이들을 결합하여 통합 가중치를 제시하고 실제 서비스 되고 있는 학술지 기사 메타데이터에 적용하였다. 실험 결과, 엔트로피 가중치 방법은 데이터 자체의 특성을 잘 반영하며, 이용자 과업을 적용한 방법은 이용자의 정보요구를 해결하는 필요한 메타데이터 요소를 제시하며, 통합 가중치는 특정 메타데이터 요소의 오류에 영향을 받지 않으면서 균형 잡힌 측정값을 제시하여 계량화 방법에 적합한 것으로 나타났다.

• 정보화연구
• /
• 제9권2호
• /
• pp.167-176
• /
• 2012

한국군은 LISI 모델을 활용하여 소요제기 및 획득단계에서 체계의 상호운용성 수준측정 및 평가를 실시하고 있다. 그러나 LISI 모델은 체계 간 상호운용성 평가에 초점이 맞추어져 있기 때문에 다수 체계가 유기적으로 연결된 복합체계의 상호운용성 평가에는 제한적이다. 또한 LISI 모델은 정량적이기 보다는 정성적인 접근방법이기 때문에 상호운용성 의사결정에 가시적인 정보 제공에는 한계가 있다. 이에 대한 해결책으로 본 연구에서는 복합체계의 정량적인 상호운용성 평가 방법론을 제안한다. 제안 방법론에서는 아키텍처를 활용하여 임무 프로세스를 지원하는 복합체계가 식별되고, 체계의 다중도와 유사도 계수를 기반으로 상호운용성 평가가 이루어진다. 그리고 제안 방법론의 효용성을 보이기 위해 사례연구 결과를 제시한다.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.457-462
• /
• 2023

Quantitative measurement of trace ethane is important in environmental science and biomedical applications. For these applications, we typically require a few tens of part-per-trillion level measurement sensitivity. To measure trace-level ethane, we constructed a cavity ring-down spectroscopy setup in the 3.37 ㎛ mid-infrared wavelength range, which is applicable to multi-species chemical analysis. We demonstrated that the detection limit of ethane is approximately 300 parts per trillion, and the measured concentration is in agreement with the amounts of the injected sample. We expect that these results can be applied to the chemical analysis of ethane and applications such as breath test equipment.

• 한국기계가공학회지
• /
• 제6권2호
• /
• pp.22-27
• /
• 2007

In this study, the two methods of stiffness measurement(Spring constant) of cantilever were proposed for quantitative measurement in Atomic Force Microscopy(AFM). As the 1st method for the measurement of stiffness, the probe method, which is used in the measurement of the semiconductor mechanical and electrical properties, was applied to the measurement of the cantilever. Experiments by the probe method were performed finding the resistance value of cantilever. As the results, the resistance was measured differently along with the dimension and the thickness of cantilever that determined the stiffness(spring constant) of the lever. As the 2nd method, the vibration characteristics(Dunkerley expression) is used to obtain the stiffness of the complex structure which is combined by AFM cantilever and the standard cantilever. We measured the resonant frequency from the complex structure using the micro stages and stereo microscope. As the results, we confirmed that the vibration characteristics(Dunkerley expression) is effected the micro complex structure of AFM cantilever.

• 대한의용생체공학회:의공학회지
• /
• 제35권1호
• /
• pp.1-7
• /
• 2014

Among semi-quantitative or fully quantitative lateral flow assay readers, an image sensor-based instrument has been widely used because of its simple setup, cheap sensor price, and compact equipment size. For all previous approaches, monochrome CCD or CMOS cameras were used for lateral flow assay imaging in which the overall intensities of all colors were taken into consideration to estimate the analyte content, although the analyte related color information is only limited to a narrow wavelength range. In the present work, we introduced a color CCD camera as a sensor and a color decomposition method to improve the sensitivity of the quantitative biosensor system which utilizes the lateral flow assay successfully. The proposed setup and image processing method were applied to achieve the quantification of imitatively dispensed particles on the surface of a porous membrane first, and the measurement result was then compared with that using a monochrome CCD. The compensation method was proposed in different illumination conditions. Eventually, the color decomposition method was introduced to the commercially available lateral flow immunochromatographic assay for the diagnosis of myocardial infarction. The measurement sensitivity utilizing the color image sensor is significantly improved since the slopes of the linear curve fit are enhanced from 0.0026 to 0.0040 and from 0.0802 to 0.1141 for myoglobin and creatine kinase (CK)-MB detection, respectively.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.37-45
• /
• 2000

The technique of laser sheet beam has been applied to optically accessible diesel engine for the quantitative measurement of soot. The results provide the information for us for reduction of soot in diesel engine. We used both LIS nad LII techniques simultaneously in this study. LIS and LII images show the quantitative distribution of the soot concentration in an optically accessible diesel engine. In this study, several results were obtained by the simultaneous measurement of LIS and LII technique. The diameter and number density of soot in combustion chamber of the test engine were obtained from ATDC 20$^{\circ}$ to 110$^{\circ}$ . The increase rate of soot diameter was about 40$^{\circ}$ between ATDC 20$^{\circ}$and 110$^{\circ}$. And the number density of soot decreased significantly between ATDC 20$^{\circ}$and 40$^{\circ}$.

• 한국어교육
• /
• 제28권4호
• /
• pp.87-119
• /
• 2017

The purpose of this study is to classify research methods used in Korean language education studies with a focus on identifying how and what quantitative research methods are utilized in these studies. Analyzing articles published in the Journal of Korean Language Education from 2005 to 2016, we found a trend that as a replacement for secondary research, primary research played a more prominent role after 2010, as the number of quantitative studies and studies using mixed methods increased. We also found that within quantitative studies of Korean language education, research themes and statistical analyses became diversified after 2010. In order for quantitative research to contribute continuously to Korean language education, the quality of research has to improve. In particular, quantitative researchers in this area should: (a) increase their general understanding of statistical methods, (b) conduct "power analysis" to determine the appropriate sample size for hypothesis testing, and (c) be aware of measurement issues such as measurement equivalence and DIF when measuring latent psychological constructs. It is also important to notice that these points above should be considered carefully in the planning and designing stage for researchers.

• 대한수의학회지
• /
• 제44권2호
• /
• pp.317-322
• /
• 2004

This study was performed to evaluate echocardiographic parameters in dogs with experimental mitral regurgitation subjected to dobutamine stress testing. In 8 beagle dogs, a 4-prong grasping forceps was inserted into the left ventricle through the carotid artery with fluoroscopic guidance. The disruption of chordae or mitral valve leaflet was performed. Echocardiographic protocols included quantitative Doppler echocardiography and M-mode measurement for evaluating left ventricle function. After all measurement was obtained at rest, dobutamine was infused incrementally. In stress testing, all measurement also was performed at rest as the same method. In stress Doppler echocardiography, regurgitant fraction and aortic stroke volume was increased significantly (P<0.001). Effective regurgitant orifice and regurgitant volume was not changed. In M-mode examination, fractional shortening was increased significantly at stress test (P<0.001). From the results obtained in this study, it could be suggested that dobutamine stress echocardiography increase left ventricle performance in non-functional mitral regurgitation and quantitative Doppler echocardiography is non-invasive, accurate method in valvular regurgitation.

• 소성∙가공
• /
• 제30권4호
• /
• pp.172-178
• /
• 2021

The cold forging process induces material deformation in an enclosed space, generating a very high forging load. Therefore, it is mainly designed as a multi-stage process, and fatigue failure occurs in forging die due to cyclic load. Studies have been conducted previously to quantitatively predict the fatigue limit of cold forging dies, however, there was a limit to field application due to the large error range and the need for expert intervention. To solve this problem, we conducted a study on the introduction of a real-time forging load measurement technology and an automated system for quantitative prediction of die life cycle. As a result, it was possible to reduce the error range of the quantitative prediction of die life cycle to within ±7%, and it became possible to use the die life cycle calculation algorithm into an automated system.

• 시스템엔지니어링학술지
• /
• 제20권spc1호
• /
• pp.1-11
• /
• 2024

Today, the importance of test and evaluation of defense systems is increasing day by day. In performing efficient defense systems test works, process improvement based on quantitative management is essential. The purpose of this paper is to present the results of process improvement for the defense systems test works of the test organization based on quantitative management activities. As a methodology to confirm process improvement performance, the 'MPM(Managing Performance and Measurement)' practice area of the CMMI model was applied. The quantitative management model for defense systems test works was developed so that it could be practically applied not only to the entire test organization but also to the organization at the department level that actually performs the test work. Finally, the application cases of the quantitative management model for defense system test works and the results of process improvement were described.