• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.491-507
• /
• 2019

The result of this study was to measure the relative efficiency of 133 colleges in south korea and to investigate the differences in the results of college basic competency evaluation. As a result of the study showed that the average difference of efficiency according to the background variables was no significant according to the scale, location, and college evaluation. but differences in the type of establishment were found to vary significantly in S.E model. In addition, it was analyzed that the efficiency of the college with limited funding for the efficiency distribution is highly distributed, which indicates that it is necessary to continuously improve the existing university methods and to assess whether they are being managed effectively. Finally, the limitations of this study are that it used only quantitative data and that additional indicators could result in different outcomes from the results of this study.

• The Journal of the Korean dental association
• /
• v.57 no.8
• /
• pp.437-447
• /
• 2019

Purpose: In recent years, efforts to improve the dental curriculum in South Korea have focused on a shift to outcome-based dental education based on core competencies in dentistry. So far, the field has seen various studies on the development of competencies, performance evaluation, and the importance of outcome-based education, but few studies have documented the development of such an education model. Therefore, this study develops an OBE curriculum for dentistry education and describes the development procedures and then finally this study intends to share our experience to other dental schools. Methods: This study introduces the development procedure and details of an outcome-based education model for dental education and presents the five stages of an outcome-based education model. In this study, 3 educational experts and 2 dental professor composed the TFT and developed the research method according to the ADDIE model. Step 1 is to conduct quantitative / qualitative research analysis through some survey and interview, Step 2 is to do a survey to revise competency, Step 3 is to develop a materials through consensus and participation of our professors of the dental school, Step 4 is to do some workshops, Step 5 is to prepare and conduct a outcome evaluation. Results: Step 1 is a required process for developing an educational model: the Job Analysis & Need Analysis stage. Step 2 is the Development of Outcome and Competency stage, which involves revising the competencies that are the basis of the curriculum. Step 3 is developing competency descriptions, competency levels, and evaluation criteria?the Development of Outcomes and Evaluation Standards. Step 4 is the Development of Milestones for Curriculum and Instructional Strategy, which examines the curriculum's problems and analyzes the improvements of each course. Step 5 is the Evaluating Outcomes stage, conducted based on the competencies specified by the target dental school. Conclustion: The model presented here can serve as a foundation for outcome-based education in other dental schools.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.3
• /
• pp.37-46
• /
• 2019

Recently, the use of CPT-based liquefaction assessment method has increased by providing more accurate results than other field tests. In CPT-based liquefaction evaluation, various soil properties are predicted and they are used for liquefaction potential assessment. In particular, fines content is one of the important input parameters in CPT-based liquefaction assessment, so it is very important to use correct prediction model and to make quantitative evaluation of estimating variability of fines content. In this study, the error evaluation of existing models for prediction of fines content through CPT was performed, and the most suitable model was selected for Pohang area, where the liquefaction phenomenon was observed in the 2017. In addition, the inherent variability of soil was analyzed, and the estimating variability of fines content was evaluated quantitatively considering the inherent variability of soil, measurement error of CPT and transformation uncertainty of selected model.

• Journal of the Korea Concrete Institute
• /
• v.22 no.4
• /
• pp.535-546
• /
• 2010

Recently, the probability of collision accident between vehicles or vessels and infrastructures are increasing at alarming rate. Particularly, collision impact load can be detrimental to sub-structures such as piers and columns. The damaged pier from an impact load of a vehicle or a vessel can lead to member damages, which make the member more vulnerable to impact load due to other accidents which. In extreme case, may cause structural collapse. Therefore, in this study, the vehicle impact load on concrete compression member was considered to assess the quantitative design resistance capacity to improve, the existing design method and to setup the new damage assessment method. The case study was carried out using the LS-DYNA, an explicit finite element analysis program. The parameters for the case study were cross-section variation of pier, impact load angle, permanent axial load and axial load ratio, concrete strength, longitudinal and lateral rebar ratios, and slenderness ratio. Using the analysis results, the performance based resistance capacity evaluation method for impact load using satisfaction curve was developed using Bayesian probabilistic method, which can be applied to reinforced concrete column design for impact loads.

• Archives of design research
• /
• v.17 no.3
• /
• pp.413-420
• /
• 2004

New design method has been required for web designers to grasp the proper emotion, impression, and feeling of a web site and reflect these elements in web design. It is certain that such a new methodology can be a useful design tool, although web designers have only relied on their intuition and experience to induce users to perceive specific emotion of web sites. In this study, Kansei Engineering Type Ⅰ (Nagamachi, 2002 and Park, 2000) method was applied to develop the methodology. One hundred thirty six web sites believed to convey emotions effectively were first selected by recommendation of professional web designers and twenty two web sites were finally chosen and evaluated using questionnaire. The web sites were then objectively and quantitatively assessed by measuring the degree of utilization of the design elements, balance, overall density, and homogeneity. We examined the cause-and-effect between the results of emotional and quantitative analysis by multiple regression and introduced the design methodology based on the examination. The research method and procedures applied to this study would be applicable to design studies related to the emotional inducement.

• Journal of Food Hygiene and Safety
• /
• v.34 no.5
• /
• pp.431-437
• /
• 2019

This study was conducted to develop a simultaneous analysis method for ferulic acid, caffeic acid, catechin and taxifolin from Health Functional Food (HFF) Pinus Pinaster bark extract. The simultaneous analytical method for ferulic acid, caffeic acid, catechin and taxifolin is carried out using UPLC-MS/MS. The method validation was performed to determine selectivity, linearity, accuracy, limit of detection (LOD), limit of quantification (LOQ) and precision for ferulic acid, caffeic acid, catechin and taxifolin. LC-MS/MS method was established using an Acquity UPLC BEH $C_{18}$ Column and was applied for these 4 compounds. Product-ion traces, at m/z $194.2{\rightarrow}133$, $180.2{\rightarrow}135$, $290.3{\rightarrow}245$, $304.3{\rightarrow}248$, were used for quantitative analysis of ferulic acid, caffeic acid, catechin and taxifolin, respectively. Excellent linearity ($r^2=0.999$) was observed for ferulic acid, caffeic acid, catechin and taxifolin in the concentration range (50-2500 mg/L). The observed recoveries of these 4 compounds were found to be between 84.9 and 104.9%, while precision was between 1.20 and 4.43% relative standard deviation (% RSD).

• The Journal of the Korea Contents Association
• /
• v.15 no.7
• /
• pp.289-299
• /
• 2015

The purpose of this study is to evaluate and compare the quality of digital X-ray imaging system. The image quality evaluation was conducted By using Modulation transfer function indicating the quantitative resolution of the image and the noise power spectrum showing the noise characteristics. Using a IEC61267 radiation quality was applied to the geometry to be used in clinical and geometry presented in IEC62220-1 and Additional filter, grid, the clinical dose and the MTF value of edge phantom was measured. Result of the MTF corresponding to each item(Grid, Filter, SID, kVp, mAs), the clinical condition 100cm, 180cm, measurements of the spatial frequency of the MTF IEC62220-1Geometry 150cm became similarly apparent, rather spatial frequency was also the case high in clinical conditions 100cm. NPS results, as the dose(mAs) is increased, NPS showed that reduced. The image quality evaluation using IEC61267 the Radiation quality, Image quality of the video using the clinical conditions Geometry than image quality evaluation using IEC62220-1Geometry was better. It shows that MTF and NPC in IEC and clinical condition were not significantly different. In order to apply the evaluation method of image quality applied with clinical conditions rather than the future method, to be presented evaluation of IEC standard, based on the results of the image characterization studies in this paper, the methods that shows good quality of spatial resolution and decrease NPS value as the least dose, used suitable parameters for whether or not using added filter, grid, change SID and clinical quality(kVp), dose(mAs) etc should be found. then It is believed to be able to properly maintain the actual quality of the image of the digital radiographic imaging system in clinical.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.2111-2111
• /
• 2001

A chemoinfometrical method for evaluating the quantitative determination of crystallinity one polymorphs based on fourie-transformed near-infrared (FT-NIR) spectroscopy was established. A direct comparison of the data with the ones collected from using the and compared with the conventional powder X-ray diffraction method was performed. [Method] The pPure a and g forms of indomethacin (IMC) were prepared by reportedusing published methods. Six kinds of standard samples obtained by physically mixing of a and g forms. After the powder X-ray diffraction profiles of samples have been measured, the intensity values were normalized to against the intensity of silicon powder as the as an external standard. The calibration curves for quantification of crystal content were based upon the total relative intensity of four diffraction peaks from of the form g crystal. FT-NIR spectra of six calibration sample sets were recorded 5 times with the NIR spectrometer (BRAN+LUEBBE). Chemoinfometric analysis was performed on the NIR spectral data sets by applying the principal component regression (PCR). [Results] The relation between the actual and predicted polymorphic contents of form g IMC measured using by the X-ray diffraction method shows a good straight linen linear relation., and it has slope of 0.023, an intercept of 0.131 and a correlation coefficient of 0.986. PCR analyses wereis was performed based on normalized NIR spectra sets offer standard samples of known content of IMC g form. IMC. A calibration equation was determined to minimize the root mean square error of the predictionthe prediction. Figure 1 shows a plot of the calibration data obtained by NIR method between the actual and predicted contents of form g IMC. The predicted values were reproducible and had a smaller standard deviation. Figure 2 shows that the plot for the predicted transformation rate (%) of form a IMC to form g as measured by X-ray diffractomeoy against to those as measured by NIR method. The plot has a slope of 1.296, an intercept of 1,109, and a correlation coefficient of 0.992. The line represents a satisfactory correlation between the two predicted values of form g IMC content. Thus NIR spectroscopy is an effective method for the evaluation to the pharmaceutical products of quantitative of polymorph.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.388-394
• /
• 2010

Metabolomics aims at the comprehensive, qualitative and quantitative analysis of wide arrays of endogenous metabolites in biological samples. It has shown particular promise in the area of toxicology and drug development, functional genomics, system biology and clinical diagnosis. In this study, analytical technique of MS instrument with high resolution mass measurement, such as time-of-flight (TOF) was validated for the purpose of investigation of amino acids, sugars and fatty acids. Rat urine and serum samples were extracted by selected each solvent (50% acetonitrile, 100% acetonitrile, acetone, methanol, water, ether) extraction method. We determined the optimized liquid chromatography/time-of-flight mass spectrometry (LC/TOFMS) system and selected appropriated columns, mobile phases, fragment energy and collision energy, which could search 17 metabolites. The spectral data collected from LC/TOFMS were tested by ANOVA. Obtained with the use of LC/TOFMS technique, our results indicated that (1) MS and MS/MS parameters were optimized and most abundant product ion of each metabolite were selected to be monitorized; (2) with design of experiment analysis, methanol yielded the optimal extraction efficiency. Therefore, the results of this study are expected to be useful in the endogenous metabolite fields according to validated SOP for endogenous amino acids, sugars and fatty acids.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.2
• /
• pp.136-140
• /
• 2000

A sensitive and quantiative method for the structural analysis of oligosaccharide was established for the glycoform analysis of glconproproteins. Inthis study, n-linked oligosaccharides of human IgG and bovine transferin were analyzed for the evaluation of the methydrate moiety ofthe method. Chrbohydrate moiety of glycoprotein was relased by hydrazinolysis and purified by paper chromatography. The oligosaccharides were labeled with a fluorescent bye, 2-aminobenzamide, for the enhancement of detection sensitivity. sialylated (acidic) oligosaccharides were separated from neutral oligosaccharide by employing a strong anion-exchange column(MonoQ) followed by the treatment with sialidase. Enzymatically desiayated fractions and neutral fractions of oligosaccharides were applied to normal-phase HPLC to resolve the peaks according to glucose unit (GU). The structure of separated molecules was further determined by sequential digestion with exoglycosidases. As a result, disialylated biantennary complextype oligosaccharide was found to be a major sugar chain in bovine transferrin (63%). In human IgG, core fucosylated asialobiantennary complex oligosaccharides were dominant. These results coincided well with reported results.