• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.3
• /
• pp.142-158
• /
• 2009

The supplier selection problem is perhaps the most important component of the purchasing function. Some of the common and influential criteria in the selection of a supplier include quality, price, delivery, and service. These evaluation criteria often conflict, however, and it is frequently impossible to find a supplier that excels in all areas. In addition, some of the criteria are quantitative and some are qualitative. Thus, a methodology is needed that can capture both subjective and objective evaluation measures. The Analytic Hierarchy Process(AHP) is a decision-making method for ranking alternative courses of action when multiple criteria must be considered. This paper proposes the AHP-based approach which can structure the supplier selection process and the achievements-based procedure which can allocate order quantities for the selected suppliers In automotive part manufacturers. Also, through the practical case of 'D' automotive part manufacturing company, we shows that the proposed AHP based supplier selection approach and the achievements-based allocation procedure of order quantity can be successfully applied for supplier selection and order quantity allocation problems.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.74-74
• /
• 2017

Wheat is one of the world's most important crop species. Recently, abnormal climate changes directly influence on the significant reduction of wheat productivity in the world. This threaten allow breeders to find new genetic resources. Wheat is one of the widely grown crops in the world. Individual cultivars / germplasm is adapted in that region where the climate is unique to each other. Therefore, introducing new genetic resources which was good in one place may better perform in another region. In this study, we evaluated germplasm in Korean environment and measured numerous agro-morphological characteristics. Information that are provided by the National Agrobiodiversity Center (Jeonju, Korea) and National Plant Germplasm System (Aberdeen, USA) were included in the analysis. Cluster analysis was performed using the unweight pair-group method of averages. The results of PCA indicated principal discriminatory characteristics of wheat landraces and varieties. Significant differences indicated high variability among the quantitative traits. Cluster analysis results showed that the groups were divided by geological climate condition. The preliminary evaluation of germplasms in Korean environment would help to develop wheat cultivars via providing useful genetic traits that are resided in alien germplasms.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.135-140
• /
• 2000

The characteristics of mechanical behavior were estimated for Ti-6Al-4V alloy with four kinds of microstructure prepared with heat treatments. For this study, impact test, tensile test and fatigue crack growth test were performed, and then compared mechanical properties on the four microstructures. Furthermore, for quantitative evaluation, fractal dimensions of crack pass were obtained using the box counting method. The main results obtained are summarized as follows. (1) The microstructures exhibited equiaxed microstructure, bimodal-microstructure and lamellar microstructure by heat treatment. (2) The impact absorbed energy and elongation is superior in the bimodal-microstructure, and the hardness and tensile strength are superior in the lamellar microstructure. (3) The fatigue crack growth rate is similar to all microstructures in the low ${\Delta}K$ region. The fatigue crack growth rate of equiaxed microstructure is fastest, and that of lamellar microstructure is lowest in the high ${\Delta}K$ region. (4) The fractal dimension D of lamellar microstructure is higher then that of the equiaxed microstructure and bimodal microstructure.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.193-197
• /
• 2008

Recently, it increases in use of CFT(Concrete filled steel tube, below CFT) that is an excellent internal force and deformation capacity because material and method are required to be diversification and High-Performance according to increase the super-high structure. And it is proposed to use high-strength Concrete Filled steel Tube Column. But it is difficult quantitative evaluation about fire-resist performance of CFT because steel tube bind concrete. Also, the case of high strength CFT is feared that spalling occur inside. Therefore, this study made CFT specimen that determine the factor(which is strength of concrete) and then CFT column was exposed to heating controlled as closely as possible the ISO-834 standard fire curve. Also, it tried to analyze internal temperature through nonlinear transient heat flow analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1B
• /
• pp.56-70
• /
• 2006

This study attempts to estimate the size of economic value that could be created by the adoption of a new internet protocol, IPv6. The existence of externality and diffusion effects in the adoption of a new platform technology makes it difficult to capture the exact costs and benefits of IPv6 adoption. Hence, this study employed multiple evaluation methods rather than relying on single method to increase the validity of results by averaging the value of different methods. Futhermore, the proposed evaluation model includes qualitative variables such as expert opinions, as well as quantitative variables, to incorporate various stakeholders' perspectives. Finally, the policy implications for IPv6 adoption and the limitations of this study are discussed.

• Journal of Welding and Joining
• /
• v.12 no.3
• /
• pp.109-117
• /
• 1994

Spot welding has wide used with a high work efficiency in the automotive and aerospace industries. Up to the present, the technique mainly used to test spot welds on production lines has been entirely depended upon destructive chisel or peel testing. Therefore, it's being very important assignment to secure the NDE technique which can be evaluate spot weld quality with more efficiency and high reliability. This paper discusses the feasibility of UNDE techniques to evaluate spot weld quality. For the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of a the corona bond from nugget, ultrasonic c-scan image and distribution of reflective echo amplitude was measured by immersion method with the mechanical and the electronic scanning of point-focussed ultrasonic beam(25 MHz). As the results of this study, corona bond which is the most dangerous types of interface defects can be successfully detected, as well as expulsion and voids. Ultrasonic testing results were confirmed and compared by optical microscope and SAM(Scanning Acoustic Microscope) observation of the spot-weld cross section. The results show that the nugget diameter can be successfully measured with the accuracy of 0.8 mm.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.2
• /
• pp.11-23
• /
• 2014

The impact and adaption on agricultural water resources considering climate change is significant for reservoirs. The change in rainfall patterns and hydrologic factors due to climate change increases the uncertainty of agricultural water supply and demand. The quantitative evaluation method of uncertainty based on agricultural water resource management under future climate conditions is a major concern. Therefore, it is necessary to improve the vulnerability management technique for agricultural water supply based on a probabilistic and stochastic risk evaluation theory. The objective of this study was to analyse the uncertainty of water resources under future climate change using probability distribution function of water supply in agricultural reservoir and demand in irrigation district. The uncertainty of future water resources in agricultural reservoirs was estimated using the time-specific analysis of histograms and probability distributions parameter, for example the location and the scale parameter. According to the uncertainty analysis, the future agricultural water supply and demand in reservoir tends to increase the uncertainty by the low consistency of the results. Thus, it is recommended to prepare a resonable decision making on water supply strategies in terms of using climate change scenarios that reflect different future development conditions.

• Journal of Environmental Impact Assessment
• /
• v.21 no.2
• /
• pp.265-277
• /
• 2012

This paper is primarily intended to present quantitative evidences for land surface albedo difference among seven metropolitan cites in South Korea. An empirical study for experimental sites was conducted to confirm how a standard MODerate Resolution Imaging Spectroradiometer (MODIS) instrument offers the viable method of measuring and comparing the regional heterogeneity of albedo among administrative districts. The metropolitan cities like Seoul located in dense building environment do result in much lower albedo than those exposed in much more sub-urban surface (e.g KwangJoo). These experimental results indicate that an urban surface such as building and road is a crucial explanatory variable for lower albedo. It is confirmed that the urban surface such as building and road could be employed as a proxy of the lower albedo burden in the metropolitan area. It is anticipated that this research output could be used as a valuable reference to confirm the potential of introducing the new concept of "administrative districts specific albedo management" to support more scientific and objective decision-making in the process of GHG (Greenhouse Gas) reduction project.

• Journal of the Korean Dietetic Association
• /
• v.16 no.2
• /
• pp.146-159
• /
• 2010

This study was conducted to determine the appropriateness of the indicators and items on teacher evaluations for professional development and to provide insight for their improvement. To accomplish this, the perception of the importance and performance frequency of 318 nutrition teachers regarding their roles inherent in the indicators and items were evaluated through a survey questionnaire based on a five-point Likert scale. The quantitative data were analyzed using descriptive statistics and a paired t-test. In addition, the reflective analysis and constant comparison method were employed to analyze the responses to the open-ended questions asking problems in the indicators and items. The results revealed that the mean scores for the importance and performance frequency of most indicators and items were over four points, which implies that most indicators and items are appropriate for evaluating the job tasks of nutrition teachers. However, it was suggested that a few items be revised or removed for their improvement and appropriateness. This study concluded that nutrition teachers should have more chances to provide nutrition education for students to enable them to perform as teachers and not simply dietitians.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.2 s.32
• /
• pp.74-82
• /
• 1999

Nowadays, the crank shaft motor vehicle has become essential as the important component. The machining precision was asked for manufacturing the shaft. They could be unstable in the quality by the conventional are welding. Both in-process quailty control and high reliability of the weld are the major concerns in applying friction wlding to the economical and qualified mass-production. No reliable nondestructive monitoring method is avaliable at present to determine the real-time evaluation of automatic production quality control for bar-to-bar friction welding of the crank shaft of O.D 24mm for motor vehicle. This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the cumulative counts of acoustic emission(AE) during plastic deformation periods of the welding and the tensile strength and other properties of the bar-to-bar welded joints of O.D. 24mm shaft as well as the various welding variables, as a new approach which attempts finally to develop real-time quality monitoring system for friction welding, resulting in practical possiblility of real-time quality control more than 100% joint efficiency showing good weld with no micro structural defects.