• Journal of Power System Engineering
• /
• v.15 no.3
• /
• pp.65-69
• /
• 2011

This paper introduces the multi-coil eddy current sensor and its characteristic in magnetic material gas turbine rotor. In the past, magnetic particle inspection method was used for qualitative defect evaluation in magnetic material gas turbine rotor. And the ultrasonic inspection method was used for quantitative defect evaluation. Nowadays, eddy current method is used in magnetic gas turbine rotor inspection due to advanced sensor design technology. We developed multi-coil eddy current sensor for the rotor dovetail inspection. At first, rotor stress is analyzed for the determination of sensor position and number. The sensor coils are designed to cover the stress concentration area of rotor dovetail. We select optimum frequency according to material standard penetration data and experiment results. The rotor mock-up and artificial defects were made for the signal detection and resolution analysis of multi-coil eddy current sensor. The results show that signal detection and resolution capabilities are enhanced in comparison to the commercialized sensor enough for the gas turbine rotor inspection. So, this developed multi-coil eddy current sensor substituted for commercialized one and it applied in real gas turbine rotor inspection.

• Journal of Korean Library and Information Science Society
• /
• v.30 no.2
• /
• pp.155-178
• /
• 1999

Ciatation analysis is a information analysis method based on the phenomenon of citing previous documents in the source document. There are many well-known studies exploring citation analysis and it applications. This paper does not attempt to review this extensive area of applications, but to demonstrate the sociological aspect of citation analysis. Specifically, this paper have reviewed the citation analysis as a quantitative method for the studies of sociology of knowledge. For this, I have described various basic methods such as citation behavior, citation count, impact factor, citation relationship etc. And I have classified into four applied areas of sociology of knowledge; (1) flow of knowledge resources, (2) evaluation of knowledge resources, (3) evaluation of knowledge community, and (4) utilization in terms of knowledge policy. Finally, I have clarified the some limitations and shortcomings of citation analysis that have addressed by citation and citation analysis itself.

• YAKHAK HOEJI
• /
• v.57 no.3
• /
• pp.161-166
• /
• 2013

Sinomenium acutum has been used for the treatment of rheumatoid arthritis, arrhythmia, and pain. We evaluated the quality of S. acutum extract by quantitatively analyzing its components such as sinomenine, magnoflorine and syringaresinol with the simultaneous determination method using HPLC-DAD. A total of 53 samples collected from different localities were evaluated with this quality evaluation method. Sinomenine, magnoflorine and syringaresinol from tested samples ranged from 0.0649~9.1050%, 0.7460~10.7590% and 0.0010~0.2441%, respectively. In the current study, we were able to exhibit the diverse quality of S. acutum samples collected from various locations using the simultaneous determination method.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.4
• /
• pp.1-14
• /
• 2002

As domestic buildings have been large-scaled, diversified and high-rise, there have been a consistent demand for design, development of construction technology and accident prevention activity as well as quality enhancement. In spite of governmental and related institutions' efforts for reducing national losses which come from numerous accidents, there have been endless small and large accidents on the construction site and thus, it is urgent to conduct empirical researches in this area. Currently safety supervision system in construction industry has enforced harm and danger prevention planning system, however it merely stick to other existing materials. In addition, it is difficult to put it into practice in that it requires bearing too much burden to draw out the planning itself in a case of large construction work. Consequently in this paper we select evaluation criteria by construction progress, classify into several categories, and regard potential danger which often occurs, as a evaluation criterion. Further step is to allow workers or collaborated companies to express their expert opinions or experiences and to encourage quality and process control and autonomous safety control by applying PSM method. The reason why PSM method should be quantitative and substantial progress is because it contributes Korean constructing companies to enhancing their safety control ability and to taking an equal stance just like developed countries,' thereby strengthening there competitive edges. Boost of safety control system by PSM method will make an enormous contribution to preventing construction accidents on the site by establishing and securing an autonomous safety control system.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2163-2167
• /
• 2012

A rapid, specific, and reliable LC-MS/MS-based bioanalytical method was developed and validated in rat plasma for the simultaneous quantitation of amitriptyline and its metabolite nortriptyline. Chromatographic separation of these analytes was achieved on a Gemini C18 column ($50{\times}4.60mm$, $5{\mu}m$) using reversed-phase chromatography. The mobile phase was an isocratic solvent system consisting of 1% formic acid in water and methanol (10:90, v/v), at a flow rate of 0.2 mL/min. The analytical range was set as 0.1-500 ng/mL for amitriptyline and 0.08-500 ng/mL for nortriptyline using a $200{\mu}L$ plasma sample. The accuracy and precision of the assay were in accordance with FDA regulations for the validation of bioanalytical methods. The validated method was successfully applied to a pharmacokinetic study in six rats after oral administration of amitriptyline (15 mg/kg). This method allows laboratory scientists to rapidly determine amitriptyline and nortriptyline concentrations in plasma.

• Biomedical Engineering Letters
• /
• v.8 no.4
• /
• pp.355-364
• /
• 2018

When focusing using an ultrasonic transducer array, a main lobe is formed in the focal region of an ultrasound field, but side lobes also arise around the focal region due to the leakage. Since the side lobes cannot be completely eliminated in the focusing process, they are responsible for subsequent ultrasound image quality degradation. To improve ultrasound image quality, a signal processing strategy to reduce side lobes is definitely in demand. To this end, quantitative determination of main and side lobes is necessary. We propose a theoretically and actually error-free method of exactly discriminating and separately computing the main lobe and side lobe parts in ultrasound image by computer simulation. We refer to images constructed using the main and side lobe signals as the main and side lobe images, respectively. Since the main and side lobe images exactly represent their main and side lobe components, respectively, they can be used to evaluate ultrasound image quality. Defining the average brightness of the main and side lobe images, the conventional to side lobe image ratio, and the main to side lobe image ratio as image quality metrics, we can evaluate image characteristics in speckle images. The proposed method is also applied in assessing the performance of side lobe suppression filtering. We show that the proposed method may greatly aid in the evaluation of medical ultrasonic images using computer simulations, albeit lacking the use of actual experimental data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.5
• /
• pp.439-448
• /
• 2022

MV (Moving Vehicle) detection using satellite imagery is important for traffic monitoring and provides a wide range of observations. Specifically, MV detection methods utilizing the time lag in single-pass optical satellite images have been studied for detecting MVs from a single set of images. Because of limitations in detecting MVs outside of roads, most previous studies required road information to limit the moving object to cars on the road. However, it is difficult to obtain road information from inaccessible areas. Therefore, this study proposed a new method for detecting MVs regardless of their locations from single-pass optical satellite images without using additional data. WV-3 (Worldview-3) satellite images were used, and a spatial correlation coefficient map was proposed to detect spatial displacement which denotes MVs across two WV-3 MS images. Finally, evaluation was performed through quantitative metrics and visual inspection. The evaluation results revealed that the proposed method can detect MV movements from the single-pass satellite images. On the contrary, misdetected or undetected MVs due to radiometric differences between the images could be identified by visual inspection. The performance of the proposed method can be improved by minimizing radiometric variations and adding conditions that are robust to radiometric differences between the images.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.457-460
• /
• 2002

The image quality of three-dimensional (3D) images has been widely investigated by the qualitative analysis method. A need remains for an objective and quantitative method to assess the image quality of 3D volume-rendered images. The purpose of this study was to evaluate the quantitative accuracy of distance measurements on 3D volume-rendered images of a dry human skull by using multi-detector computed tomography (MDCT). A radiologist measured five times the twenty-one direct measurement line items composed among twelve reference points on the skull surface with a digital vernier caliper. The water filled skull specimen was scanned with a MDCT according to the section thicknesses of 1.25, 2.50, 3.75, and 5.00 mm for helical (high quality; pitch 3:1) scan mode. MDCT data were reconstructed with its acquisition section thickness and with 1.25 mm section thickness for all scans. An observer also measured seven times the corresponding items on 3D volume-rendered images with measuring tools provided by volumetric analysis software. The quantitative accuracy of distance measurements on the 3D volume-rendered images was statistically evaluated (p-value < 0.05) by comparatively analyzing these measurements with the direct distance measurements. The accuracy of distance measurements on the 3D volume-rendered MDCT images acquired with 1.25, 2.50, 3,75 and 5.00 mm section thickness and reconstructed with its section thickness were 48%, 33%, 23%, and 14%, respectively. Meanwhile, there were insignificant statistical differences in accuracy of distance measurements among 3D volume-rendered images reconstructed with 1.25 mm section thickness for the each acquisition section thickness. MDCT images acquired with thick section thickness and reconstructed with thin section thickness in helical scan mode should be effectively used in medical planning of 3D volume-rendered images. The quantitative analysis of distance measurement may be a useful tool for evaluating the quantitative accuracy and the defining optimal parameters of 3D volume-rendered CT images.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.2
• /
• pp.160-178
• /
• 2023

Diagnosis and analysis of occlusal relationships are important factors in prosthetic treatment. A thorough occlusion analysis and evaluation should be performed before treatment to restore a stable interocclusal relationship. Analysis and evaluation are essential during the treatment process and at regular follow-ups. Recently, with the development of dental equipment and digital processing methods, new quantitative analysis methods that can record the patient's occlusal relationship have been introduced. Among them, the T-Scan Novus (Tekscan Inc., S. Boston, MA, USA) displays the strength of the initial contact point and the occlusal contact point of the teeth using a pressure sensor. With this, occlusal contact time of the teeth, anteroposterior and left-right balance of occlusal force can be compared. The Dental prescale II (GC Co., Tokyo, Japan) scans the occlusal contact point using a pressure-sensing film and analyzes the density of the contact point. It can measure the distribution and strength of the occlusal force of the teeth in the most natural occlusion state. Based on this, appropriate prosthetic treatment (four-unit fixed partial denture, removable partial denture, complete denture, and complete oral restoration cases) was performed according to the area and extent of the patient's tooth loss. The patient's occlusion at the first visit, treatment stage, right after treatment, and regular follow-up were compared and evaluated using a quantitative method for appropriate occlusion analysis using T-Scan Novus and Dental prescale II. This report enhances the understanding of occlusion analysis during prosthetic restoration. The results satisfied both the clinician and patients in terms of function and aesthetics.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.769-774
• /
• 2011

IT technology based projects was conducted to implement education on producing creative ideas through on-line education and grasp thinking disposition of students in terms of creativity education efficiency. The differences in idea creation among students according to thinking dispositions were analyzed through qualitative evaluation and quantitative evaluation of project and its result was drawn. The purpose of this study was to help cultivate a man of ability who will make a great contribution to knowledge information society by proposing education model based on new method of teaching and learning.