• 비파괴검사학회지
• /
• 제24권3호
• /
• pp.246-252
• /
• 2004

복합재료는 이방성의 특징으로 매우 복잡한 역학거동을 하며, 해석 및 신뢰성 검사에 많은 어려움이 있다. 특히, 기존의 비파괴검사기법으로 내부손상을 검출하는 것은 매우 어려운 실정이다. 이에 본 연구에서는 복합재구조물의 가장 취약한 분야인 충격에 의한 손상이 발생할 경우 효과적인 검출기법을 개발하고, 충격에 따른 내부결함의 정량평가에 ESPI를 활용하였다. 인공결함을 이용하여 ESPI기법의 신뢰성을 확보하고 실제 충격손상 시험편에 대해 적용하여 5%이내의 오차율로 결함을 정량평가하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.268-273
• /
• 2000

Velocity-dependent increase in tonic stretch reflexes is one of the prominent characteristics of spasticity. It is very important to evaluate spasticity objectively and quantitatively before and after treatment for physicians. An accurate quantitative biomechanical evaluation for the spasticity which is caused by the disorder of central nervous system is made in this study. A sudden leg dropper which is designed to generate objective testing environment at every trial gives very effective environment for the test. Kinematic data are archived by the 3-dimensional motion analysis system($Elite^{(R)}$, B.T.S., Italy). Kinematic data are angle and angular velocity of lower limb joints, and length and lengthening velocity of lower limb muscle. A program is also developed to analyze the kinematic data of lower limb, contraction and relaxation length of muscles, and dynamic EMG data at the same tim. To evaluate spasticity quantitatively, total 31 parameters extracted from goniogram, EMG and muscle model are analyzed. Statistical analysis are made for bilateral correlations for all parameters. The described instrumentation and parameters to make quantitative and objective evaluation of spasticity shows good results.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1355-1362
• /
• 2018

In order to obtain a better understanding of the ageing process of the field composite insulators, it is necessary to explore a quantitative-valuation method for the aging state evaluation. And the linear relationship between volume resistivity and temperature is proposed. In this paper, the composite insulators with different lengths of operating lives from two manufacturers were tested. The relationship between trap characteristics and volume resistivity-temperature characteristics were analyzed based on Thermal Stimulated Current (TSC), volume resistivity-temperature test, Scanning Electron Microscope (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). Furthermore, the application of trap characteristics in the quantitative evaluation of aging state of composite insulators was discussed. The results showed that there was a general negative correlation between the relative variation ratio of trap charges and the volume resistivity-temperature characteristics. Meanwhile, the physicochemical properties would change with the aging time, which would result in the increasing of electron traps. Combined with the TSC and volume resistivity test results, the trap characteristic thresholds which indicated the serious age of the composite insulators had been proposed.

• 품질경영학회지
• /
• 제51권2호
• /
• pp.185-202
• /
• 2023

Purpose: The purpose of this study is to identify key performance evaluation items and factors that are effective and practical for project management of defense standard standard improvement projects, and to develop a quantitative performance evaluation model. Methods: For the development of a performance evaluation model for defense standard improvement projects, we analyzed past major project performance and derived evaluation items and factors. To increase the objectivity and efficiency of project evaluation, we developed an evaluation index that enables relative evaluation of evaluation targets, and calculated the main importance of evaluation items using the Analytic Hierarchy Process (AHP) method based on the main opinions of expert groups. Results: The study resulted in the identification of main performance items for defense standard improvement projects, which were classified into defense standard conformity review performance and defense standard improvement performance items. We also simplified the evaluation model by integrating various evaluation items into similar evaluation factors. Additionally, we developed a quantitative evaluation index that enables relative evaluation of the targets and verified the objectivity and validity of the suggested performance evaluation model by reevaluating it using performance data from past commissioned professional institutions Conclusion: Developing a quantitative evaluation model for defense standard improvement projects is expected to provide a means of measuring the effectiveness of the project, and to be used as a tool to determine the appropriateness and effectiveness of medium and long-term project plans.

• Toxicological Research
• /
• 제19권2호
• /
• pp.83-90
• /
• 2003

Since histopathological examination was known to be the most sensitive evaluation for testicular toxicity, regulatory authorities have been published the guidelines on practical testicular assay approach. Those guidelines specified details of evaluation including fixation, embedding, stain-ing, histological examination and also seminiferous tubular staging methods. However, there have been confusing understanding among toxicologists and even pathologists on staging theory and its application on industrial testicular toxicity. Guidelines did not intend to conduct quantitative assay with staging but recommended the use of knowledge of staging. To count each tubular stage with statistical analysis is known to be time consuming and labor burdening work but the significance of toxicity has little value. It also has been pointed out that the application of staging theory for longer-term toxicity considered to be lacking of rationale. It could be recommended that qualitative assay with aware-ness of germ cell loss is more efficient method rather than quantitative counting of each tubular stage. Therefore it would be required that comprehensive understanding of testicular toxicity evaluation and the use of testicular staging method.

• Journal of Information Processing Systems
• /
• 제1권1호
• /
• pp.79-85
• /
• 2005

In this paper, we dealt with substantial asset analysis methodology applied to two-dimensional asset classification and qualitative evaluation method according to the business process. Most of the existent risk analysis methodology and tools presented classification by asset type and physical evaluation by a quantitative method. We focused our research on qualitative evaluation with 2-dimensional asset classification. It converts from quantitative asset value with purchase cost, recovery and exchange cost, etc. to qualitative evaluation considering specific factors related to the business process. In the first phase, we classified the IT assets into tangible and intangible assets, including human and information data asset, and evaluated their value. Then, we converted the quantitative asset value to the qualitative asset value using a conversion standard table. In the second phase, we reclassified the assets using 2-dimensional classification factors reflecting the business process, and applied weight to the first evaluation results. This method is to consider the organization characteristics, IT asset structure scheme and business process. Therefore, we can evaluate the concrete and substantial asset value corresponding to the organization business process, even if they are the same asset type.

• 한국전자거래학회지
• /
• 제9권2호
• /
• pp.33-50
• /
• 2004

본 논문에서는 정보화 투자에 대한 성과평가를 통해 공공부문의 정보화 예산투자에 대한 타당성과 효과성 측정 방안, 그리고 투자대비 효과의 적합성을 제고 할 수 있는 계량적 평가모델을 제시하였다. 즉, 전자정부 과제로 추진된 정부전자문서유통센터 구축사업을 대상으로 정보화 투자에 대한 명확한 성과목표를 설정하고 사전평가 및 사후평가를 객관적으로 측정할 수 있는 핵심성과지표(KPI)를 개발하여 계량적 평가모델을 이용한 현장검증 연구방식으로 성과평가 결과를 도출하였다.

• 한국경영과학회지
• /
• 제27권1호
• /
• pp.53-73
• /
• 2002

The launch of a new business is crucial to the future growth and profitability of a company. A new business project typically requires a large amount of resources while it has a high possibility of failure. The evaluation of new business opportunities is therefore quite a critical decision-making to companies. This evaluation includes screening of a large number of criteria at a time which often makes desision-making very complicated. Management should evaluate the business alternatives in a sound and consistent manner that is hard to achieve because the new business evaluation is a typical semi/unstructured decision-making problem. The difficulty in such an evaluation will increase if it is required for management to consider both quantitative and qualitative criteria simultaneously. Under these circumstances, this study has proposed a decision-making framework that utilizes analytical hierarchy process(AHP). This study has identified a set of criteria essential to the new business evaluation and suggested a systematic framework for it. Both qualitative and quantitative evaluations are incorporated into the single framework in this study.

• Architectural research
• /
• 제12권2호
• /
• pp.41-52
• /
• 2010

The aim of this paper is to evaluate the methodological strategies for the architectural design field of study mainly focused on qualitative and quantitative research designs. Firstly, this paper addresses the characteristics of the six approaches including their methodological aspects in general. Each strategy is assessed by the different approaches to give full insights in it. Secondly, it distinguishes the differences among six research approaches especially derived from qualitative and quantitative research designs. The differences are discussed in terms of the strengths and weaknesses of each strategy. Finally, this paper attempts to discuss about possible applications for introducing approaches to the research topic with which the exemplified research topic, a design evaluation system, deals. To investigate the applicability of the design methods employed, the following topic has been stated; how to develop a design evaluation system and what to be considered for unfolding the thrown topic in terms of strategic approaches in the field of architectural design researches reviewed through the study.

• 한국생산제조학회지
• /
• 제4권4호
• /
• pp.42-49
• /
• 1995

It is not clearly known how defects or inclusions of a low carbon steel affect a fatigue strength. We study this issue using SM15C materials. The investigation is carried out by a quantitative evaluation, and experimental findings are: (1) a fatigue limit of A series smooth specimen is 205MPa, and that of B, C, D series is 245MPa, 304MPa and 245MPa, respectively. (2) the fatigue limit varies with respects to the stress distribution I the vicinity of a defects and crack. (3) the micro hole creates a half-circular shape crack, while the hole depth is not critical to the fatigue strength, (4) considering the fatigue strength, the hole diameter is more significant than the hole depth, and (5) Fatigue limit of artificially defected specimen is lower than that of a flawless one (5-10%), however, there exist allowance size and depth of defect which don't get to influence at fatigue limit.