• Electronics and Telecommunications Trends
• /
• v.32 no.6
• /
• pp.105-115
• /
• 2017

This paper describes a project - based quality management model that identifies development technologies and codes while at the same time verifying the ability to implement processes that are essential in R & D projects. In order to verify the process implemented in the R & D project implementation, there are review, checking points, and evaluating methods the process performance levels for five processes such as defining requirements which is the beginning stage of system development, testing process which is the completion stage of system development, and project management and peer review process for project management and support in the proposed project-based quality management model. For development technology and code validation, the model included the documented test cases for each requirement by the developer in the requirements definition stage, debugging and testing in the design and implementation stages, static analysis and open source licence verification procedure, and system environment. After applying the model in SW development R&D project for evaluating the process performance, and verifying the development technology and the code, the developers responded that the improvement in the development technique and the code, and upgrade of process performance level for project are more than 10%.

• Journal of KIISE:Information Networking
• /
• v.37 no.6
• /
• pp.494-498
• /
• 2010

Performance requirements of a system are usually closely related to the quality of service provided by the system. The call success rate of a mobile communication system is, for example, directly linked with the quality of call service. Therefore, meeting the performance requirements is one of the critical issues during the operation of services as well as in system development. In this paper, we present a testing method for evaluating the call success rate of a mobile communication system by using interval estimation. Also we analyze the criterion used in the evaluation of the quality of 3G mobile communication services which was recently performed by Korea Communications Commission and then discuss the problems.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.247-255
• /
• 2024

Development of electronic warfare(EW) software has become increasingly challenging due to stricter regulations, shorter development cycles, and increased reliability testing. Consequently, software development often proceeds without proper architecture design, which can lead to missing critical quality requirements and potential system redesigns. In this study, we propose using Attribute-Driven Design(ADD) 3.0 to design software architecture specifically tailored for EW systems, enabling a more systematic approach to address quality requirements. The paper presents an overview of EW software and ADD 3.0 methodology, followed by an analysis of the architecture design results using static and dynamic views. The paper concludes by discussing the effectiveness of the proposed architecture design.

• Journal of Korean Society for Quality Management
• /
• v.32 no.3
• /
• pp.126-140
• /
• 2004

The AS 9100 aerospace standard has become the aerospace quality management system standard agreed to, instead of ISO 9001 and MIL-Q-9858A by international aerospace manufacturing companies. In this paper correlative requirements of each of the standards are compared and analyzed. Then the evolutionary concept and its direction is proposed as a guide to participate in the preparation and establishment of current aerospace quality management systems. This study is applicable to the future as well as present aerospace manufacturing activities throughout the world.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.3
• /
• pp.324-340
• /
• 2010

Video streaming service over wireless networks is a challenging task because of the changes in the wireless channel conditions that can occur due to interference, fading, and station mobility. To provide an efficient wireless video streaming service, the rate adaptation scheme should improve wireless node performance and channel utilization. Moreover, the quality adaptation scheme should be considered at the streaming application. To meet these requirements, we propose a new cross-layer design for video streaming over wireless networks. This design includes the rate and quality adaptation schemes. The rate adaptation scheme selects the optimal transmission mode and resolves the performance anomaly problem. Based on performance improvement by the proposed rate adaptation scheme, our quality adaptation scheme improves the quality of video streaming. Through performance evaluations, we prove that our cross-layer design improves the wireless channel utilization and the quality of video streaming.

• International Journal of Quality Innovation
• /
• v.5 no.1
• /
• pp.10-22
• /
• 2004

The paper outlines a comprehensive three-step approach to the development of advanced strategies for quality control of a complex machining process. The research framework is a developed concept for Integrated Supervisory Process Control. The promising results obtained demonstrate a non-traditional approach to the deployment of quality and productivity requirements set by the system users, whereby the efficiency and systematization of the development of quality control strategies can be significantly improved.

• Korean Management Science Review
• /
• v.13 no.2
• /
• pp.177-191
• /
• 1996

Quality is defined as several terms of fitness for use, conformance to requirements or specification, and loss of social effect. And the quality can be classified into design, production and service quality according to its formation of product (or servece). To be satisfactory product, the product must be controlled to maintain the specified level of quality at the whole life cycle of R&D step through disposal step. And the wrong design is one of the great source of cost. Therefore, the quality assurance on the R&D step is very important. This paper suggests a general procedure for the R&D quality assurance and discusses the methods for the reliable design. And a telecommunication equipment is considered as an applied example. Finally, it is discussed some subjects on the R&D quality assurance as further researches.

• Journal of Korean Society for Quality Management
• /
• v.37 no.1
• /
• pp.69-79
• /
• 2009

Supply Chain Management is the process of planning, implementing and controlling the operations of the supply chain to satisfy customer requirements as efficiently as possible. It spans all movements and storage of raw materials, work-in-process inventory, and finished goods from point-of-origin to point-of-consumption. Korean Standards Association claims the Supply Chain Quality Management(SCQM) as a win-win model of organizations among the supply chains for the best product/service quality to final customers. The SCQM is focused on quality of product/service and will do much for improving manufacturing performance between customer and suppliers. Consulting-teams make every effort to design suitable solution for constructing solutions and improving the performance. This study is to analyze the performance of SCQM consulting, from July of 2007 to June of 2008, and would provide some guidelines to design the optimal consulting models and develop guidebooks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.7
• /
• pp.2377-2389
• /
• 2022

At present people have higher and higher requirements for network video quality, but video quality will be impaired by various factors, so video quality assessment has become more and more important. This paper focuses on the video quality assessment method using different fuzzy neural networks. Firstly, the main factors that impair the video quality are introduced, such as unit time jamming times, average pause time, blur degree and block effect. Secondly, two fuzzy neural network models are used to build the objective assessment method. By adjusting the network structure to optimize the assessment model, the objective assessment value of video quality is obtained. Meanwhile the advantages and disadvantages of the two models are analysed. Lastly, the proposed method is compared with many recent related assessment methods. This paper will give the experimental results and the detail of assessment process.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.38-48
• /
• 2017

ISO 9001 Quality Management Systems-Requirements has been revised in 2015. It has been updated four times since its publication in 1987. It is the most widely used International Standard in the world. There are over one million companies and organizations in over 170 countries certified to ISO 9001 from an ISO survey. Organizations are supposed to be certified to this new version by late 2018. The key changes in ISO 9001:2015 are to establish a High Level Structure (HLS) and focus on Risk-Based Thinking (RBT). Risk-Based Thinking means the process approach to decide how risk is addressed in establishing the processes to improve process outputs and prevent undesirable results. It pursues process planning and controls based on risks so that organizations can improve the effectiveness of the quality management system. It maintains and manages a Quality Management System that inherently addresses risks and meets objectives. In this article we firstly attempt to explain how to understand the fundamental concept of Risk-Based Thinking which is a systematic approach to consider risks rather than treating prevention as a separate component of a Quality Management System. We comment on the detailed requirements that contain risks in ISO 9001:2015 clauses. We also summarize recent advances on the risk assessment and management in line with ISO 31000:2009 Risk Management-Principles and Guidelines. We finally propose the practical risk management procedures for implementing ISO 9001:2015 with an emphasis on RBT. This article would contribute to help quality managers and practitioners convert to ISO 9001:2015.