• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.109-115
• /
• 2004

Polishing process has been applied to get extremely fine surfaces, e.g., mirror surfaces such as optical mirrors, lens, molds and etc. Nowadays not only fine surface quality but also submicron order of dimensional accuracy is required for many applications. To meet the requirements polishing process should be provided with an active control of polishing pressure especially for automation of polishing process. In this paper a study on development of an active polishing pressure control system has been presented. A new type of tool assembly has been developed to facilitate the control. The tool is attached to an axis of a polishing machine with a coil spring and control of the polishing pressure is done by the position control of the axis, which needs no additional actuator. The polishing pressure is successfully measured by the measurement of the spring deformation. Control specifications were quantitatively considered by weighting functions and a controller was designed by using loop-shaping technique based on the no synthesis. Some experiments have been executed on a polishing machine with a PC-NC controller. It is shown that the results were coincident well with the theoretical analyses and satisfied the design specifications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11b
• /
• pp.15-17
• /
• 2004

The quality of X -ray image is depending on the acquired signal pattern So far, the MTF(modulation transfer function) of medical image system has been obtained through various kinds of calculationprocesses after using SWRF (A square wave response function method) to print out it into films. In this study, a tool has been developed that can help the actual user who actually creates the medical images measure the MTF of the finaldisplay image very simply by applying Borland C++ builder software as well as LEAD tools software for the SWRF calculation process to analyze the MTF even on the display image. Films have been printed out by this newly developed MTF measuring tool under the same conditions with the ones for the existing tools and also the calculation method has shown no difference with any existing SWRF calculation method. By using this, it was found out that the MTF of the resolving power of the computed radiography(CR) Image plate (IP) that is a conventional X-ray detection system Jar the conventional X-ray purpose was about 10% at the range of 3.00 LP/mm.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.12 no.2
• /
• pp.196-204
• /
• 2006

Purpose: This study was purposed to identify the effect of pain monitoring program for improving the knowledge, attitude and assessment ability of cancer pain in oncology nurses. Methods: In this study pain monitoring program was developed based on the literature, and constructed it with various teaching method including several group lectures, workshop, focus group and implementation at the clinical practices. In order to test the effect of this program, contrast group, pretest-post test quasi-experimental design was designed. 46 oncology nurses randomly assigned to either control or experimental group. The tool used are 32 item scale for the evaluation of the nurses' knowledge, attitude toward pain modified by Kim(1997), which was originally developed by McCaffery and Ferrel(1995). Results: The pain monitoring program for the oncology nurses was statistically significant for improving the level of the knowledge about and attitude toward pain management, and pain assessment behavior. Conclusion: More sensitive multiple measurement tool for the attitude toward pain management needs to be developed. Nurses need more knowledge and effective attitude toward cancer pain management. Pain monitoring program in this study is effective to improve the quality of pain management.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.9-20
• /
• 1998

In recent manufacturing process, the increase of productivity has been attempted by reducing machining time with the increase of cutting force. However, the excessive increase of cutting force can cause tool breakage and have a bad effect on both manufacturing machine and workpiece. Thus, it is necessary to estimate and control the cutting force in real time during the process. In this study, use of disturbance observer is proposed for the indirect cutting force estimation. The estimated cutting force is used for the real-time control of feedrate, making the actual cutting force follow the reference force command. Since the suggested method does not need an expensive sensor like a dynamometer, the method is expected to be used practically. Since the actual cutting force follow the reference force, resulting the reducing of the machining time the increase of productivity are also expected, and the quality of cutting surface has been improved due to the adjusted feedrate. Besides, an actual constant cutting force guarantees the prevention of tool breakage. To show the effectiveness of the suggested cutting force control method, an experimental setup has been made without sensor and applied to several workpieces. Experiments show that the suggested method is effective to cutting force control of a CNC machining center.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.501-506
• /
• 2022

The prolonged of the Post Corona, many Cosmetic company launched various online services. In this paper, consider about the quality of product recommendation using personal color detecting technology. Using the detecting tool which is most widely used by cosmetic company. we will do a lot of testing with this tool and also testing with color detecting equipment. For precise experimental results, it was conducted in a consistent experimental environment. This experiment can be a foundation that can be well used for the expansion of personalized product recommendation services according to the current image-based skin color measurement.

• Journal of East-West Nursing Research
• /
• v.29 no.2
• /
• pp.95-105
• /
• 2023

Purpose: The purpose of this study was to develop a measurement tool for burnout in general hospital nurses and verify its reliability and validity. Methods: Construct factors were extracted through an extensive literature review and in-depth interviews with nurses. Psychometric testing was conducted with 550 nurses in a general hospital. Data were analyzed using validity and reliability testing. Results: As a result of factor analysis, 4 factors and 26 items were selected. The burnout factors of general hospital nurses were professional quality of life, work environment excellence, job satisfaction, and negative emotions. The overall coefficient of determination was 46.38%. These factors were validated through convergent, discriminant and concurrent validity testing. The internal consistency reliability was acceptable (Cronbach's α=.91). Conclusions: The Burnout Scale for General Hospital Nurses is a valid and reliable tool that contributes to the assessment of burnout in general hospital nurses. This scale is expected to be used in burnout practice and research of general hospital nurses.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1305-1312
• /
• 2006

This study is about the development of measurement system using ubiquitous wireless communication for river flow monitoring. The system can acquire water depth, quality (temperature, pH, conductivity, turbidity etc.) while a GPS module for getting the location data of measurement points. Also this system is able to acquire the field data via RF connection and can be controlled same time. The acquired data is transmitted to a gateway system from the remote buoy using Zigbee wireless connection. And the gateway system is able to monitor the data through GIS monitoring tool. Finally the data are transmitted to a server computer using CDMA wireless connection by gateway system. The D/B of server computer are constructed automatically and monitored the project web site. The resulting system can be used for scour monitoring, environment monitoring and the other monitoring purposes such as a river flow monitoring system.

• Journal of Korean Library and Information Science Society
• /
• v.42 no.4
• /
• pp.31-50
• /
• 2011

In education, evaluation is an important element because instructor can judge the growth and development of students, it has been to bring about quality improvement in education. Performance assessment has emerged to overcome traditional evaluation such as paper test, multiple choice test. Performance assessment is an approach to measuring a student's status based on the way the student completes a specified task. Information literacy instruction is aimed at cultivating information literacy. Performance assessment suitable for measurement to status of Information literacy. In order to performance assessment, task should have the first. However, instructor is difficult to develop a good performance task to meet the assessment needs. Therefore, this research aims at suggesting the developmental tool of performance task applicable to Information literacy instruction. The proposed tool is a template type, consists of 4 steps, educational goals and learning objectives, knowledge and capabilities, task types, measurement and scoring criteria.

• Korean Journal of Occupational Health Nursing
• /
• v.14 no.2
• /
• pp.93-107
• /
• 2005

Purpose: The purpose of this study is to identify the trends of studies on work-related musculoskeletal disorder and to suggest the direction of future research. Method: 144 research thesis for a degree on work-related musculoskeletal disorder were systematic reviewed and published from Jan. 1990 to Mar. 2005. The analyzed using descriptive statistics, an actual number, percentage. Result: As its result the work-related musculoskeletal disorder research which is announced from domestic the doctorate dissertation at the 2004 year 42 the most many 144 dissertation middle most to be 129 in master degree dissertation was 15 in Ph D degree. Dissertation contents character the contents against the result relation that it analyzes especially and a condition and an obstacle was many most at 84. Research plan in most description investigation research 121 the dissertation field to be the especially public health (hygiene, industry and environment) at this 57 most many research object person distribution manufacturing industry in the research object one dissertation was many most at the 40. The tools which are used in each measurement in the question tool which it uses most the question price of land which uses the condition investigation ticket which it made from the NIOSH and the ANSI most many 33, the hazard which analyzes a work attitude in the tool which it uses the RULA was many most at 14. In the stress test tool social psychological healthy measurement PWI (Psychological Wellbeing Index) the dissertation which uses the Job Strain of the Karasek Model to be many most at 19 PWI (Psychological Wellbeing Index) 7 easy use. Work-related musculoskeletal disorder measurement hazard in physiological index and the machinery and tools which it uses there were 9 researches to use an electromyogram most plentifully. With the effect goes to a work-related musculoskeletal disorder they are 33 where the age is many most from general quality. From healthy act with the relation of smoking the year to be many from 16 dissertations. Work of the corpse an attitude (the attitude which is inappropriate) with 5 and the work market the work burglar is many most at 9, the society-support of 36 where the stress is many psychologically most, the stress and service also the most many duty discretion (authority and autonomy) is 6 at the duty demand boat song 9. The service career to be many is 22 of extraordinarily with relation of service. Conclusion: It is recommended the research which it sees being limited in only domestic thesis for a degree the international comparative study to become accomplished. It comes to think with the fact that it will be necessary to make the protocol which it conforms in the civil official guide the test researches for the protocol or arbitration program which is standardized are necessary. Prevention and the civil official of work relation bones and sinews standing total disease hazard scientific base one program is necessary with base.

• Progress in Medical Physics
• /
• v.19 no.4
• /
• pp.201-208
• /
• 2008

Physical evaluations provide the basis for an objective and quantitative analysis of the image quality. Nonetheless, there are limitations in using physical evaluations to judge the utility of the image quality if the observer's subjectivity plays a key role despite its imprecise and variable nature. This study proposes a new method for objective and quantitative evaluation of image quality to compensate for the demerits of both physical and subjective image quality and combine the merits of them. The images of chest phantom were acquired from four digital radiography systems on clinic sites. The physical image quality was derived from an image analysis algorithm in terms of the contrast-to-noise ratio (CNR) of the low-contrast objects in three regions (lung, heart, and diaphragm) of a digital chest phantom radiograph. For image analysis, various image processing techniques were used such as segmentation, and registration, etc. The subjective image quality was assessed by the ability of the human observer to detect low-contrast objects. Fuzzy integral was used to integrate them. The findings of this study showed that the physical evaluation did not agree with the subjective evaluation. The system with the better performance in physical measurement showed the worse result in subjective evaluation compared to the other system. The proposed protocol is an integral evaluation method of image quality, which includes the properties of both physical and subjective measurement. It may be used as a useful tool in image evaluation of various modalities.