• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.59-63
• /
• 2019

Purpose The motion due to respiration of patients undergoing PET/CT is a cause of artifacts in image and registration error between PET and CT images. The degree of displacement and distortion for tumor, which affects the measurement of Standard Uptake Value (SUV) and lesion volume, is especially higher for tumors that is small or located at the base of lungs. The purpose of this study was to evaluate the usefulness of prone position in the correction of image distortion due to respiration of patients in PET/CT. Materials and Methods The imaging equipment used in this study was PET/CT Discovery 600 (GE Healthcare, MI, USA). 20 patients whose lesions were identified in the middle and lower lungs from May to August 2018 were enrolled in this study. After acquiring whole body image in the supine position, additional images of the lesion area were obtained in the prone position with the same conditions. SUVmax, SUVmean, and volume of the lesion were measured for each image, and the displacement of the lesion on PET and CT images were measured, compared, and analyzed. Results The SUVmax, SUVmean, and volume, and displacement of the lesion were $4.72{\pm}2.04$, $3.10{\pm}1.38$, $4.68{\pm}3.20$, and $4.64{\pm}1.88$, respectively for image acquired in the supine position and $5.89{\pm}2.42$, $3.97{\pm}1.65$, $2.13{\pm}1.09$, and $2.24{\pm}0.84$, respectively for image acquired in the prone position, indicating that, for all the lesions imaged, SUVmax and SUVmean were higher and volume and displacement were smaller in the images acquired in prone position compared to those acquired in supine one(p<0.05). Conclusion These results showed that the prone position PET/CT imaging improves the quality of the image by increasing the SUV of the lesion and reducing the respiratory artifacts caused by registration error between PET and CT images. It is considered that the PET/CT imaging in the prone position is helpful in the diagnosis of the disease as an economical and efficient methods that correct registration error for the lesions in basal lung and reduce artifacts.

• Korean Journal of Poultry Science
• /
• v.46 no.3
• /
• pp.137-154
• /
• 2019

This study was conducted to develop and compare Samgyetang broth from extract of pre-treated chicken feet. Chicken feet were subjected to non-heating (control), heating at $70^{\circ}C$ for 12 h in a hot air dryer, and heating at $180^{\circ}C$ for 1 h in an oven. The heat-treated chicken feet were extracted at $121^{\circ}C$ for 1 h and 2 h, respectively. The extract was placed in a pouch with whole chicken carcass ($470{\pm}10g$). The sealed Samgyetang retort was made according to the industrial method. The pH of the extract from preheated chicken feet was lower than that extracted from fresh chicken feet. The Thiobarbituric Acid Reactive Substances (TBARS) value of the preheated chicken feet extract was significantly lower (P<0.05) than that of fresh chicken feet extract, but there were no significant differences among the broths. As the extraction time increased, the pH and TBARS value decreased in the extract (P<0.05) but increased in the broth (P<0.05). According to the sensory evaluation test, the extract from 1 h hot air heating and drying was significantly better in appearance, aroma, and overall preference than the other treatments (P<0.05). The GC-MS results showed that benzaldehyde and benzothiazole, which are widely known to give meat and nuts flavor, were detected in those treatments (P<0.05). The Samgyetang broths prepared from 1 h hot air heating and drying extract were significantly higher in the overall acceptability according to the sensory test (P<0.05). In summary, the quality of retort Samgyetang broth can be improved by adding chicken feet extract which is subjected to heating and drying for 1 h.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.2
• /
• pp.29-37
• /
• 2019

Purpose DMIDR(Discovery Molecular Imaging Digital Ready, General Electric Healthcare, USA) is a PET/CT scanner designed to allow application of PSF(Point Spread Function), TOF(Time of Flight) and Q.Clear algorithm. Especially, Q.Clear is a reconstruction algorithm which can overcome the limitation of OSEM(Ordered Subset Expectation Maximization) and reduce the image noise based on voxel unit. The aim of this paper is to evaluate the performance of reconstruction algorithms and optimize the algorithm combination to improve the accurate SUV(Standardized Uptake Value) measurement and lesion detectability. Materials and Methods PET phantom was filled with $^{18}F-FDG$ radioactivity concentration ratio of hot to background was in a ratio of 2:1, 4:1 and 8:1. Scan was performed using the NEMA protocols. Scan data was reconstructed using combination of (1)VPFX(VUE point FX(TOF)), (2)VPHD-S(VUE Point HD+PSF), (3)VPFX-S (TOF+PSF), (4)QCHD-S-400((VUE Point HD+Q.Clear(${\beta}-strength$ 400)+PSF), (5)QCFX-S-400(TOF +Q.Clear(${\beta}-strength$ 400)+PSF), (6)QCHD-S-50(VUE Point HD+Q.Clear(${\beta}-strength$ 50)+PSF) and (7)QCFX-S-50(TOF+Q.Clear(${\beta}-strength$ 50)+PSF). CR(Contrast Recovery) and BV(Background Variability) were compared. Also, SNR(Signal to Noise Ratio) and RC(Recovery Coefficient) of counts and SUV were compared respectively. Results VPFX-S showed the highest CR value in sphere size of 10 and 13 mm, and QCFX-S-50 showed the highest value in spheres greater than 17 mm. In comparison of BV and SNR, QCFX-S-400 and QCHD-S-400 showed good results. The results of SUV measurement were proportional to the H/B ratio. RC for SUV is in inverse proportion to the H/B ratio and QCFX-S-50 showed highest value. In addition, reconstruction algorithm of Q.Clear using 400 of ${\beta}-strength$ showed lower value. Conclusion When higher ${\beta}-strength$ was applied Q.Clear showed better image quality by reducing the noise. On the contrary, lower ${\beta}-strength$ was applied Q.Clear showed that sharpness increase and PVE(Partial Volume Effect) decrease, so it is possible to measure SUV based on high RC comparing to conventional reconstruction conditions. An appropriate choice of these reconstruction algorithm can improve the accuracy and lesion detectability. In this reason, it is necessary to optimize the algorithm parameter according to the purpose.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.1-12
• /
• 2019

After making tea by steaming the Artichoke(Hellanthus tuberosus) nine times and drying them nine times, the ingredients and functions of the Artichoke tea were compared to those of M. It had 342.27kcal/100g in its own deloped Artichoke tea, 73.87g/100g of carbohydrates, 6.80g/100g of crude ash and 8.21g/100g of crude protein. The total of free sugars were 32.66mg/100, among them, fructose 17.40, sucrose 9.03 and glucose 6.05 mg/100g. The total mineral contents of the developed tea was 2,785.67mg/100g. It was 2,563.93mg/100g of potassium, 97.52mg/100g of calcium and 88.78mg/100g of magnesium. The saturated fat of Artichoke tea was 30.34mg/100g and unsaturated fat was 69.66mg/100g, among which the linoleic acid was 47.0mg/100%, palmitic acid was 25.31mg/100% and linolenic acid was 8.61mg/100g. DPPH radical scavenging was 34.2% of teas that were developed, 5.2% of M's for comparison, and 44.0% of index materials. ABTS radical scavenging was 93.0% of teas developed, 61.9% of M's tea and 47.6% of index materials, and SOD like activity was 2.7% of teas developed and 1.6% of M's tea. The flavonoid content was 2.8 fold of the tea developed, 2.0 fold of M's tea and 1.7 fold of index material. The polyphenol content was 38.2 fold, 8.92 fold of M's tea and 14.0 fold of index material. The inhibition rate for ${\alpha}$-glucosidase was 9.83% teas developed and 8.92% of M's. The sensory evaluation compares to the one time extract and the five time extract. Based on the one-time extract, color of tea developed was 83.7%, the M's tea was 50.0%, the flavor was 78%, M's tea was 42.5%, the delicate taste was 66.7% of teas developed and M's tea was 37.5% and the overall acceptability was 73.3% of teas developed, M's tea was 47.5%. The comparison of M's tea showed that the extract decreased as we made it, and the overall symbol level decreased to 46.3% after five time-extyracts, while that of the developed tea decreased to 73.3%. The Artichoke tea developed this way is believed to have greater antioxidant function, higher effective substance content, and a higher affinity than M's tea an index material for comparison purposes.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.23-33
• /
• 2019

After making tea by steaming the Burdock(Arctium lappa) nine times and drying it nine times, the ingredients and functions of the Burdock tea were compared to those of M company. The tea's calories were 346.48kcal/100g, carbohydrates were 72.75g/100g, crude protein was 11.98g/100g, and crude ash was 5.01g/100g. The total of free sugars were 31.93mg/100, among them, fructose was 26.27, sucrose was 1.27 mg/100g. The inorganic material contents were 1,476.21mg/100g of potassium, 255.96 mg/100g of calcium and 311.41 mg/100g of magnesium. The saturated fatty acids were 40.73mg/100g and the unsaturated fatty acids were 59.27mg/100g, among which the linoleic acid was 41.28mg/100g, the palmitic acid was 33.11mg/100g, the oleic acid was 10.07mg/100g and linolenic acid was 7.92mg/100g. DPPH radical scavenging was 33.9% of teas that were developed, 2.3% of M's tea for comparison, and 37.2% of indiex material. ABTS radical scavenging were 90.7% of teas developed, 85.9% of M's tea and 37.2% of index materials, and SOD like activities were 11.3% of teas developed and 50.5% of M's teas. The flavonoid content was 2.6 fold of the tea developed, 2.9 fold of M's tea and 1.7 fold of index material. The polyphenol content was 33.8 fold of teas developed, 38.9 fold of the M's tea and 13.8 fold of the index material. The sensory evaluation compare to the one-time extract and the five-time extract. Based on the one-time extract, the color were 65.9 % of the five-time extract tea were developed, 12.8 % of the M's tea. Flavour were 78.0% of the tea developed and 33.3% of the M's tea, tastes were 71.4% of the tea developed, 20.7% of the M's tea. The cart for comparison showed that while the extract decreased as we developed it, the overall symbolism decreased to 21.4% after five time extracts, the developed tea decreased to 72.1%. We believe that the developed tea will have a greater effect on preventing and improving diseases as it has a stronger antioxidant function, more effective substances, and a higher level of symbolism than the comparative M squared tea and surface substance.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.65-71
• /
• 2019

With regard to current Neck CT, Bismuth shielding boards are often being used to reduce exposure to superficial organs such as the thyroid. However, beam hardening often occurs near superficial organs with Bismuth shielding boards and variations in CT Number, Noise, and Uniformity values occur severely. This study looked into the usefulness of shielding boards made from aluminum and silicone that can be easily obtained and have good machinability by comparing them to the existing Bismuth shielding board. An Aluminum 7.3mm and a Silicone 21.5mm were made with shielding ratios similar to that of the Bismuth(0.06 mmPb). TLD (TLD-100) was placed on the thyroid area of the Phantom (RS-108T) and 5 doses were measured for each. To compare image quality, CT Number and Noise variations in axial images of the thyroid area in Neck CT images were compared. Also, variations in CT Number, Noise, and Uniformity were measured in the AAPM phantom images and compared. In the results, when thyroid doses for each shielding board were compared, the Bismuth shielding board showed a 14% reduction, the Silicone 21.5mm showed a 15% reduction, and the Aluminum 7.3mm showed a 13% reduction compared to the Non-Shield. Statistically, there were no significant differences in comparison with the Bismuth shielding board. In CT Number variations of thyroid area images, variations were largest for the Bismuth shielding board. With Uniformity evaluations of the AAPM phantom, the Bismuth shielding board was found unsuitable and the Aluminum 7.3mm and Silicone 21.5mm satisfied the acceptance criteria. Research results show that the Aluminum 7.3mm and Silicone 21.5mm have a similar shielding ratio to the high-priced Bismuth shielding board that is currently being used clinically and in comparison tests of CT Number attenuation coefficient variations, Noise, and Uniformity which are phantom image evaluation items, they proved to be better than Bismuth shielding boards. If various shielding boards are made using aluminum and silicone, sized appropriately for superficial organs, it would be useful in decreasing patient doses.

• Korean Journal of Remote Sensing
• /
• v.35 no.2
• /
• pp.251-263
• /
• 2019

Sentinel-2 Multi Spectral Instrument(MSI) launched by the European Space Agency (ESA) offered high spatial resolution optical products, enhanced temporal revisit of five days, and 13 spectral bands in the visible, near infrared and shortwave infrared wavelengths similar to Landsat mission. Landsat satellite imagery has been applied to various previous studies, but Sentinel-2 optical satellite imagery has not been widely used. Currently, for global coverage, Sentinel-2 products are systematically processed and distributed to Level-1C (L1C) products which contain the Top-of-Atmosphere (TOA) reflectance. Furthermore, ESA plans a systematic global production of Level-2A(L2A) product including the atmospheric corrected Bottom-of-Atmosphere (BOA) reflectance considered the aerosol optical thickness and the water vapor content. Therefore, the Sentinel-2 L2A products are expected to enhance the reliability of image quality for overall coverage in the Sentinel-2 mission with enhanced spatial,spectral, and temporal resolution. The purpose of this work is a quantitative comparison Sentinel-2 L2A products and fully simulated image to evaluate the applicability of the Sentinel-2 dataset in cultivated land growing various kinds of crops in Korea. Reference image of Sentinel-2 L2A data was simulated by airborne hyperspectral data acquired from AISA Fenix sensor. The simulation imagery was compared with the reflectance of L1C TOA and that of L2A BOA data. The result of quantitative comparison shows that, for the atmospherically corrected L2A reflectance, the decrease in RMSE and the increase in correlation coefficient were found at the visible band and vegetation indices to be significant.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.525-538
• /
• 2019

The purpose of this study was to analyze the habitat status and species diversity of benthic diatoms and estimate the applicability of TDI (Trophic Diatom Index) to obtain the basic data for the identification and management of created wetlands in the Nakdong River. We observed a total of 38 families and 173 species of benthic diatom during the survey period, and spring and autumn showed a similar number of species of 156 and 154, respectively. The result of the SOM (Self-Organizing Map) analysis showed that the distribution of benthic diatom was sensitive to environmental factors such as nutrient concentration and rainfall in each wetland. The cluster 1 was characterized by the survey sites of autumn mostly and consisted of points of high TDI, although the nutrients such as total phosphorus and total nitrogen were low, and the species number and abundance of diatoms were low. Conversely, cluster 4 was characterized by the survey sites of spring mostly and consisted of points of low TDI, even though total nitrogen was high. Considering that most of the created wetlands had the reduced inflow and outflow, the increased flow rate in the summer lowers nutrient values in autumn, and the species number and abundance of benthic diatom decreases due to the increase of turbidity, which reduces the light penetrations to the substrates. On the contrary, the TDI value is low in spring because the low water level causes insufficient substrate surface to the benthic diatoms, and it is too early for the establishment and development of saprophilous species. Although various studies have used TDI as an indicator for evaluating the habitat environment and water quality, it is not a good evaluation indicator in this study since the nutrient concentration in the wetlands mostly high as they have a low flow rate and are close to the stagnant area. Nevertheless, additional periodic surveys that comprehensively reflect the fact that the summer rainfall and inflow/outflow regulating function might affect the species diversity and distribution of benthic diatoms are necessary.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.53-59
• /
• 2020

Purpose: The purpose of this study is to compare and analyze the difference between the MLC log file-based software (Mobius) and the conventional phantom-ionization chamber (ArcCheck) dose verification method according to the change of target volume. Material and method: Radius 0.25cm, 0.5cm, 1cm, 2cm, 3cm, 4cm, 5cm, 6cm, 7cm, 8cm, 9cm, 10cm with a Sphere-shaped target Twelve plans were created and dose verification using Mobius and ArcCheck was conducted three times each. The irradiated data were compared and analyzed using the point dose error value and the gamma passing rate (3%/3mm) as evaluation indicators. Result: Mobius point dose error values were -9.87% at a radius of 0.25cm and -4.39% at 0.5cm, and the error value was within 3% at the remaining target volume. The gamma passing rate was 95% at a radius of 9cm and 93.9% at 10cm, and a passing rate of more than 95% was shown in the remaining target volume. In ArcCheck, the average error value of the point dose was about 2% in all target volumes. The gamma passing rate also showed a pass rate of 98% or more in all target volumes. Conclusion: For small targets with a radius of 0.5cm or less or a large target with a radius of 9cm or more, considering the uncertainty of DQA based on MLC log files, phantom-ionized DQA is used in complementary ways to include point dose, gamma index, DVH, and target coverage. It is believed that it is desirable to verify the dose delivery through a comprehensive analysis.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.475-480
• /
• 2021

Interest in edible insects such as Protaetia brevitarsis has increased rapidly, and several insect producers use these insects in industrialized mass production. However, mass rearing of insects can cause insect diseases. Sprouted barley is a valuable source of nutrients and has antioxidant, antimicrobial, anti-inflammatory, and anti-cancer effects. This study was conducted to investigate the effect of sprouted barley as a feed additive for producing healthy P. brevitarsis larvae. P. brevitarsis larvae were fed feeds with or without sprouted barley, and their body weight and larval period wewe checked weekly. To confirm the antibacterial effects of sprouted barley, in vitro bioassays were performed by counting Serratia marcescens colonies, and in vivo bioassays were performed by determining the survival rate and body weights of the S. marcescens-infected larvae. Larvae fed different feeds were analyzed for their nutrient compositions (i.e., such as proximate composition, minerals, amino acids, and heavy metals). Larvae fed 5% and 10% sprouted barley had maximum weight increases of 19.2% and 23.1%, respectively. Both treatment groups had significantly shorter larval periods than those of the control group. Sprouted barley markedly inhibited the growth of entomopathogenic S. marcescens. Furthermore, larvae fed sprouted barley exhibited higher Cu, Zn, and K levels. Seventeen amino acids were present in larvae fed sprouted barley, of which, tyrosine and glutamic acid were predominant. No heavy metals were detected in any of the investigated groups. Therefore, sprouted barley may be a suitable feed additive for producing high-quality P. brevitarsis larvae.