• 소성∙가공
• /
• 제23권3호
• /
• pp.159-163
• /
• 2014

In the current study, the effect of small surface defects in the starting material including roughness, indentations, or scratches, which are perpendicular to the direction of drawing, on the product quality is investigated using the finite element method. An axisymmetric defect is assumed. Such defects are defined by a cylindrical defect area and two tapered regions connecting the defect area to the non-defective area of the material. Various conditions for these initial surface defects are considered, including defect depth, defect slope and defect length. To describe the plastic deformation of the defect in detail during the simulation, local remeshing is applied. Based on the finite element results, defect disappearance maps were generated. It was found that defect disappearance is significantly dependent on the defect depth and the defect length coupled with the defect slope.

• 한국건축시공학회지
• /
• 제7권4호
• /
• pp.125-132
• /
• 2007

The use of Self-Leveling material is increasing recently. This paper assesses the quality of surface layer of concrete floor when Self-Leveling material is defective. The paper shows how to predict the defect of SL material before construction begins. The relationship between the quality of surface layer of concrete floor and the defect of SL material was determined and the quality of surface layer of concrete floor was then estimated. The relations between the quality of surface layer and the defect of SL material were determine considering surface strength, moisture, and consistency of surface layer. Absorbing amount was used as the indicator of consistency and the absorbing amount of test material was measured. Then the relations between the test material and surface strength were determined. Generally concrete floor with greater consistency has greater surface strength, however in this study, we hound that high impact concrete floor could have lower surface strength as the consistency gets bigger. The relations between the level of defect occurred in SL material and the quality of surface layer were examined and we clarified that the surface layer with lower consistency gets higher possibility to occur exfoliation in early stage, one or two weeks after constructing SL material. When the consistency is sufficient, the occurring situation of defect depends upon the moisture of surface layer. Little amount of moisture gets higher possibility not to occur the defect. As the amount increases, fissure generates and early exfoliation may occur. In addition, the level of fissure is highly related with the surface strength.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.691-696
• /
• 2015

소프트웨어 결함에 대한 관심이 높아지고 있다. 기업은 소프트웨어를 개발하는 조직, 고객대응 조직, 품질관리 조직 등 다양한 방법과 채널을 이용하여 개선을 위한 노력을 하고 있다. 이렇게 수집된 결함 데이터 들을 그 조건과 용도에 맞게 분석하여 소프트웨어 결함을 최소화하고 나아가 제품품질 향상에 기여할 수 있다. 본 연구에서 기업용 소프트웨어의 결함 추이를 테스트 성숙도 모델을 기반으로 분석하여 결함 예방 프로세스를 수립하고 프로젝트에 적용하여 106개의 결함이 16개로 감소하였다. 본 연구는 소프트웨어 품질활동 중 기본이 되는 기존결함에 관심을 가짐으로서 최소한의 자원을 활용하여 소프트웨어 제품 품질을 개선할 수 있는 방안을 제시하는데 의의를 가진다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.33-34
• /
• 2022

The Apartment Defect Dispute Mediation Committee of the Ministry of Land, Infrastructure, and Transport received as many as 7,686 complaints regarding defects in 2021, and the conflict caused by these disputes on the defects is worsening. A quality inspection team system was established in January 2021 to address the deepening conflict, and this system prevented the emergence of defects in apartment houses before the residents moved in. Quality inspections were conducted based on the Housing Act standards, but the reality is that the standards for the ordinances are not systematic. Based on the analysis of the ordinances by the apartment quality inspection team, 23 out of 226 local governments utilized the quality inspection teams, and they had different standards for the quality inspection subjects and inspection periods. In addition, the inspection standards for the defect checklists used by the apartment quality inspection teams operated by local governments varied. A survey was conducted by apartment quality experts to tackle this problem and proposed improvement plans for the defect checklists used for the quality inspection of apartment houses.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2003년도 추계학술대회
• /
• pp.713-721
• /
• 2003

Embedded 소프트웨어의 품길 측정 프로세스 관리는 Embedded 시스템의 적시성과 품질 만족을 위해서도 필요하다. 그러나, Embedded 소프트웨어의 결함에 대하여 사전 분석하거나 예측 없이 개발 프로세스 상에서 결함을 관리하는 것은 위험이 따른다. 본 연구에서는 Embedded 소프트웨어에서 품질 측정 프로세스 관리를 위해 소프트웨어의 정량적 속성 중에 가장 중요한 요소 중에 하나인 결함을 중심으로 본 연구가 진행되었다. Embedded 소프트웨어에 가장 적합한 프로세스를 정의하고 개선하고자 하는 과정에서, 프로세스 관리를 효과적으로 수행하기 위해 Embedded 소프트웨어의 특성과 결함 특성을 이해하고, 이를 근간으로 결함 속성을 정의하고 결함을 통한 품질 측정 프로세스 관리를 할 수 있도록, 결함 데이터를 이용하여 프로세스를 관리하는데 기여하고자 한다. 따라서, 본 연구에서는 결함 데이터 분석을 위해 필요한 속성을 파악하고, 테스트 단계를 중심으로 결함 데이터의 활용과 결함데이터를 이용한 프로세스 관리 방법을 제안하여, 이를 통해 Embedded 소프트웨어 프로세스를 관리하는 분들에게 효과적인 활용이 될 수 있도록 한다.

• Journal of the Korean Data and Information Science Society
• /
• 제19권2호
• /
• pp.609-620
• /
• 2008

There may be several parallel equipments having the same function in a multi-stage manufacturing process, which affect the product quality differently and have significant differences in defect rate. The product quality may depend on what equipments it has been processed as well as what process variable values it has. Applying one model ignoring the presence of different equipments may distort the prediction of defect rate and the identification of important quality variables affecting the defect rate. We propose a procedure for data segmentation when constructing models for predicting the defect rate or for identifying major process variables influencing product quality. The proposed procedure is based on the principal component analysis and the analysis of variance, which demonstrates a better performance in predicting defect rate through a case study with a PDP manufacturing process.

• 한국건설관리학회논문집
• /
• 제6권1호
• /
• pp.140-150
• /
• 2005

최근 공동주택의 마감자재가 고급화, 다양화되면서 품질만족에 대한 고객의 욕구가 과거 그 어느 때 보다도 증대되고 있으며 건설업체 또한 자사의 신인도 및 브랜드 가치의 상승을 위해 정밀시공을 통한 품질확보에 많은 노력을 기울이고 있다. 그러나 국내 공동주택 현장의 품질점검 및 하자관리는 현장관리 인원의 부족, 과다한 문서 발생, 업무 절차의 복잡성 및 관련주체간의 비효율적인 의사소통으로 품질점검에 따른 시설물의 이력관리 및 하자관리가 신속히 이루어지지 못하고 있는 실정이다. 따라서 본 연구의 목적은 이러한 품질점검 및 하자관리의 문제점을 해결하고자 PDA 및 웹을 활용하여 공동주택의 품질점검 및 하자관리에 대한 정보를 실시간으로 수집하고 이를 통해 관련 주체간의 효율적인 업무처리와 세대별 이력관리를 지원할 수 있도록 하는 공동주택 품질점검 및 하자관리 시스템을 구현하는 것이다. 본 연구에서 제시된 품질점검 및 하자 관리 시스템의 활용은 기존의 수작업에 의한 업무 절차를 간소화하고 관련 조직간의 원활한 의사소통과 시설물의 하자 관련 이력 데이터를 구축케 함으로써 품질관리 관련 업무의 질적 향상을 도모하고 궁극적으로는 품질 향상을 통한 건설업체의 고객 만족도 및 신인도 제고에도 크게 기여할 수 있을 것으로 기대된다.

• 한국주거학회논문집
• /
• 제26권2호
• /
• pp.67-79
• /
• 2015

As the Korean construction market in the apartment housing has changed to a housing consumer focused market, interest and importance on efficient use and management on existing buildings has increased rather than demand for new buildings. Interest of housing consumers on apartment house quality has increased in this market paradigm, and this spontaneously is connected to quality flaw related defect disputes and lawsuits that the importance of defect diagnosis has continuously increased. This defect diagnosis is directly connected to maintenance charges in defect dispute and lawsuit processes that rather objective and highly credible progress of duty is required. However, most defect diagnosis firms today that progress defect diagnosis are using different diagnosis methods and depend on the experience of experienced professionals that there is no standardized defect diagnosis process. Therefore, the purpose of this study is to provide common defect diagnosis process model for defect diagnosis firms utilizing the BPMN (Business Process Modeling Notation) modeling method. It is expected that this will contribute to professional and reliable task performances of concerned defect diagnosis workers. Furthermore, it is expected that design lawsuit damage will be substantially reduced by standardizing defect diagnosis processes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.155-156
• /
• 2018

Apartment houses are now a popular form of general housing, and the construction techniques and materials quality used to construct apartments are also continuously evolving as if they were representative. However, issues concerning flaws are constantly being reported in the press. This study attempts to analyze the trend of conflicts related to defects and to analyze the types of defects received in the apartment building, to suggest the development of the integrated defect management system, and to develop the construction based on the development of the system.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.7-13
• /
• 2013

Recently, defect management have been considered as one of the major issues for more large-sized and complicated in domestic construction industry. However, the defect management have not been performed systematically because of special manpower, excessive amount of documents, 2D based inspection work, unclear traditional checklists, complicated work process and difficulty in communicating construction information. Therefore, the construction field manager could not performed the quality inspection and defect management work on time as well as the reliability of recorded quality and defect factors was decreased. The primary objective of this study is develop a Construction Defect Management Application CDMA) using a mobile (smartphone). The application can be sharing a huge information and communication technology based on RFID (Radio-Frequency Identification), BIM (Building Information Modeling) which enables field mangers to efficiently gather the information of defection in construction on-site.