• Korean Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.135-150
• /
• 1999

The purpose of this study is on the dance costume of ancient Egypt. First, after the present study looked onto a specialty of Egyptian dance, and then the present study classified Egyptian dress into type and form, quality of material and color tone, hair and headdress and other ornaments. Fundamentally, this study was intended to understand the traditional culture and to grasp the peculiarity of Egyptian dancing dress. This study was progressed as a theoretical research by using documents, photographs, literatures of museum, etc. The results of the study could be summarized as follows. Egyptian dancing featured the earliest form of stage dance in the world and improved religion dancing and sideshow dancing getting out of the form of primitive dance, and also there were professional dancers who developed highly skillful dancing technique. They played a role in disseminating it to many countries of the Mediterranean sea. Dancers of Egypt wore a variety of cloths like the general people. Accordingly, there were no big differences in qualify of material, color tone and other ornaments as well. Yet in accordance with improvement of dance, there was a show-up of clothing of professional dancers and changing of detail parts. So dancing dress was formed while distinguished from general clothing. Therefore, dancing dress of Egypt represents racial characteristics, activity, originality and pursues not authority, but respect of physical beauty or natural beauty.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.1 s.151
• /
• pp.16-25
• /
• 2007

Studies of unsteady-airfoil flows have been motivated mostly by efforts to avoid. or reduce such undesirable effects as flutter, noise and vibrations, dynamic stall. In this paper, we carry out a computational study of viscous flows around a two-dimensional oscillating airfoil to investigate unsteady effects in these important and challenging flows. A fully implicit incompressible RANS solver has been used for calculating unsteady viscous flows around an airfoil. The cell-centered End order finite volume method is utilized to discretize governing equations. in order to ease the flow computation for fluid region changing in time, improve the qualify of solution and simplify the grid generation for an oscillating airfoil flow, the computational method adopts a moving and deforming grid generation technique based on the multi-block grid topology. The numerical method is applied for calculating viscous flows of an oscillating NACA 0012 in uniform flow. The computational results are compared with available experimental data. Computed results are compared with experimental data and flow characteristics of the experiment are reproduced well In the computed results.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.4
• /
• pp.5-24
• /
• 2004

This study was conducted to find out how the team organization works and to suggest better ways of applying the team system to a library organization. In this study, the survey was conducted to examine the characteristics of the university libraries that have adopted the team system, and the problems in operation were analysed. The findings indicate that staffs at the university libraries had a comparatively negative image of the team system, and that university library has provided insufficient training and less supports for their staffs in the process of adopting the system. This study might be applicable to any strategy which seeks to reduce bureaucracy, empower staff, create a team system culture. and enhance the delivery of high qualify services.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.8 s.101
• /
• pp.945-953
• /
• 2005

The purpose of this paper is to develop a linear regression model for the sound quality index of vehicle Interior noise. For this, objective measurement data of the vehicles driving in acceleration was measured. On the basis of analysis, psychoacoustic parameters were extracted and subjective evaluation was performed by noise and vibration expert evaluators. For the subjective evaluation, the paired comparisons and the semantic differential methods were used to evaluate sound quality of vehicle interior noise. By the paired comparison which evaluate two pairs of vehicle interior noise, the preference was estimated. With the semantic differential and the factor analysis, it was evaluated words of two pairs which expressed appropriately the sense of evaluator about noise source. Therefore the characteristics of the sound qualify for the vehicle were differentiated. From the results of both the correlation analysis and the multiple factor regression analysis, the sound quality evaluation model for the sense of human hearing was derived and indexed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.661-665
• /
• 2006

This study investigates objective and subjective evaluations of refrigerator noise. To describe the fluctuations like a click, a rapid increase of sound level, a change of pitch, a transition into the stationary and ending phase, the psychoacoustical and autocorrelation function(ACF) parameters have been employed. First, subjective evaluation of the noisiness of 24 kinds of refrigerators was conducted. Then, the relationship between objective measures of the refrigerator noise on perceived noisiness was examined with multiple regression analyses. Sound Quality Indices using the psychoacoustical and ACF parameters were also developed. The important psychoacoustical parameters for evaluating noisiness are loudness and roughness of stationary phase. The relationship between the noisiness and the ACF parameters shows that sound energy ${\Phi}(0)$ and its fluctuations are important. Also, refrigerator sounds that had a fluctuation of pitch were rated as more annoying. The fluctuation of pitch is expressed by ${\tau}_1\;and\;{\Phi}_1$ defined by the delay time and the amplitude of the first peak of the ACF.

• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.651-658
• /
• 2006

Mobile computing environment is known to be quite difficult to provide user with a stable QoS(Qualify of Service) due to its mobility nature. In order to protect the inherent characteristics of wireless network such as low bandwidth and high transmission delay along with the user's mobility, many works are conducted to apply caching and prefetching methods. This paper presents a novel prefetching technique which is based on user's preference, that is, interest and Uuかity. It tries to improves the effectiveness of prefetching by separating and appling the interest with personal tendency of a given information, and the popularity with general tendency of the information. The proposed scheme shown relatively superior performance in terms of the utilization ratio of prefetched information and the failure ratio of information retrieval than the existing methods.

• Research in Community and Public Health Nursing
• /
• v.18 no.2
• /
• pp.232-241
• /
• 2007

Purpose: The aim of this study was to explore the health-related quality of life of caregivers for demented elders. Method: The subjects of this study were 170 pairs of demented elders and their caregivers. Socio-demographic characteristics of the demented elders and the caregivers, Barthel index and SF-36 were used in this study. Data analysis procedure included t-test, ANOVA, Pearson correlation coefficient, and hierarchical multiple regression. Results: The score of overall health-related quality of life (HRQoL) was 288.62 in norm-based scoring. The major factors that affect HRQoL of the demented elders' caregivers were burden, the age of the caregiver, ADL and gender of the demented elder, and these factors explained 34.5% of HRQoL. Conclusion: The factors significantly affecting the caregivers' HRQoL were burden, the age of the caregiver and ADL. The effective social support system should be considered in respective nursing interventions to decrease the level of burden and to increase HRQoL in demented elders' caregivers. Further studies and efforts will be needed to investigate preceding factors of burden and HRQoL.

• Journal of Power System Engineering
• /
• v.12 no.3
• /
• pp.19-25
• /
• 2008

This paper deals with the heat transfer and pressure drop characteristics of R-290 (Propane), R-600a (Iso-butane) and R-1270 (Propylene) as an environment friendly refrigerant and R-22 as a HCFC's refrigerant for condensing. The test section is a horizontal double pipe heat exchanger. Condensing heat transfer and pressure drop measurements were Peformed for 12.70 mm micro-fin tube and compared with the results in smooth tube. The local condensing heat transfer coefficients of hydrocarbon refrigerants were superior to those of R-22 and the maximum increasing rate of heat transfer coefficient was found in R-600a. The average condensing heat transfer coefficients in hydrocarbon refrigerants showed 20 to 28% higher values than those of R-22. Hydrocarbon refrigerants have a higher pressure drop than that of R-22 with respect to refrigerant qualify and mass flux. Also, the condensing heat transfer coefficient and pressure drop of working fluids in smooth and micro-fin tube were compared. The heat transfer enhancement factor (EF) between smooth and micro-fin tube varied from 2.2 to 2.6 in all experimental conditions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.340-347
• /
• 2004

Ultra-small size, high-performance, solenoid-type RF chip inductors utilizing low-loss A1$_2$O$_3$ core materials were investigated. The dimensions of the RF chip inductors fabricated were 1.0mm${\times}$0.5mm${\times}$0.5mm and copper coils were used. The materials (96％ A1$_2$O$_3$) and shape (I-type) of the core, the diameters (40${\mu}{\textrm}{m}$) and position (middle) of the coil, and the lengths (0.35mm) of solenoid were determined by a high-frequency structure simulator (HFSS) to maximize the performance of the inductors. The high-frequency characteristics of the inductance (L) and quality-factor (Q) of the developed inductors were measured using a RF impedance/material analyzer (E4991A with E16197A test fixture). The developed inductors exhibit an inductance of 11 to 11.3nH and a qualify factor of 22.3 to 65.7 over the frequency ranges of 250 MHz to 1.7 GHz, and show results comparable to those measured for the inductors prepared by Coilcraft$^{TM}$. The simulated data described the high-frequency data of the L and Q of the fabricated inductors well.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.849-852
• /
• 2004

Indium tin oxide (ITO) thin films on polymeric substrates such as acryl (AC), Poly carbornate (PC), polypropylene (PP), and polyethlene terephthalate (PET) have been deposited by a do reactive magnetron sputtering without heat treatments. Sputtering parameters is an important factor for high Qualify of ITO thin films prepared on polymeric substrates. Furthermore, the material, electrical and optical properties of as-deposited ITO films are dominated by the ratio of oxygen partial pressure. As the experimental results the surface roughness of ITO films becomes rough as the oxygen partial pressure Increases. The electrical resistivity of as-deposited ITO films decreases initially, and then increases with the increase of oxygen partial pressure. The optical transmittance at visible wavelength for all polymeric substrates is above 80%.