• IEIE Transactions on Smart Processing and Computing
• /
• v.1 no.3
• /
• pp.152-160
• /
• 2012

This paper proposes a frame-level rate control algorithm for low delay video applications to reduce the fluctuations in the bitrate. The proposed algorithm minimizes the bitrate fluctuations in two ways with minimal coding loss. First, the proposed rate control applies R-Q model to all frames including the first frame of every group of pictures (GOP) except for the first one of a sequence. Conventional rate control algorithms do not use any R-Q models for the first frame of each GOP and do not estimate the generated-bit. An unexpected output rate result from the first frame affects the remainder of the pictures in the rate control. Second, a rate-distortion (R-D) cost is calculated regardless of the hierarchical coding structure for low bitrate fluctuations because the hierarchical coding structure controls the output bitrate in rate distortion optimization (RDO) process. The experimental results show that the average variance of per-frame bits with the proposed algorithm can reduce by approximately 33.8% with a delta peak signal-to-noise ratio (PSNR) degradation of 1.4dB for a "low-delay B" coding structure and by approximately 35.7% with a delta-PSNR degradation of 1.3dB for a "low-delay P" coding structure, compared to HM 8.0 rate control.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.12
• /
• pp.83-87
• /
• 2015

This paper presents a simple notch filter, which is so suitable for three-phase unbalanced and distorted power line. In the d-q synchronous transformation, three-phase unbalanced and distorted voltages generate lots of ripple voltages on d-q axes. The ripples make disturbances on controllers such as PLL of phase tracking. Unbalanced state makes ripple of double the frequency of power line. Odd harmonics 5th and 7th on the line make even 4th and 6th ripples on d-q axes due to the rotating reference frame, respectively. Cascaded two comb filters, delay lines 1/4T and 1/8T, are adopted for the ripple rejection. The filter rejects harmonics 2nd, 4th, 6th, 10th and so on. They are very effective to remove the ripples of both unbalance and distortion. The filter, implemented by two FIFOs on an experimental system, is adopted on a PLL controller of power line phase tracking. Through the simulation and experimental results, performance of the proposed comb filter has been validated.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.85-87
• /
• 2002

본 논문은 SNMP(Simple Network Management Protocol)기반의 ATM 교환 장비를 CMIP(common management information protocol)기반의 관리망에 연동하기 위한 Q3 Adaptor 기능 중 ATM 연결 관리와 Frame Relay 연동 관리를 소개한다. 본 논문의 ATM연결 관리는 점대점(Point-to-Point Permanent Virtual Connection) PVC(P)로 한정하고, FR 연동 관리는 ATM/FR 연결의 One-to-One PVC로 한정하며 ATM 밀 ATM/FR 연결에 대하여 CMIP Manager, Q3 Adaptor 및 교환 장비의 DB간 불일치 현상을 극복하기 위한 현행화 기능도 소개한다.

• Korean Journal of Microbiology
• /
• v.34 no.3
• /
• pp.115-119
• /
• 1998

We cloned the 4.8 kb BglII fragment containing genes downstream pHENX7 from Pseudomonas sp. strain DJ77. The restriction map of the resultant clone, recombinant plasmid pYCS500, was determined. Sequencing analysis of the 465 bp HindIII-ClaI fragment revealed an open reading frame of 282 bp that was then designated phnM. The deduced polypeptide is 93 amino acid residues long with a $M_r$ of 10,008. The PhnM has 37.3-53.9% identity with plant-type ferredoxin proteins such as NahT, XylT, DmpQ, AtdS, PhlG, PhhQ and TbuW and contains the motif similar to well-conserved functional domains of those proteins.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.519-523
• /
• 2010

In Gen-2 RFID system, the initial value of $Q_{fp}$, which is the slot-count parameter of Q-algorithm, is not defined in the standard. In this case, if the number of tags within the reader's identification range is small and we let the initial $Q_{fp}$ be large, the number of empty slot will be large. On the other hand, if we let the initial $Q_{fp}$ be small in spite of many tags, almost all the slots will be collided. As a result, the performance will be declined because the frame size does not converge to the optimal point quickly during the query round. In this paper, we propose a scheme to allocate the optimal initial $Q_{fp}$ through the tag number estimation before the query round begins. Through computer simulations, it is demonstrated that the proposed scheme achieves more stable performance than Gen-2 Q-algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.529-531
• /
• 2011

In Gen-2 Q-algorithm, the values of weight C, which is the parameter for incrementing or decrementing the slot-count size, are not defined in the standard. In this case, if the reader selects an inappropriate weight, there are a lot of empty or collided slots. As a result, the performance will be degraded because the frame size does not converge to the optimal point quickly during the query round. In this paper, we analyze how the performances of Gen-2 Q-algorithm will be affected by the weight value.

• Honam Mathematical Journal
• /
• v.41 no.2
• /
• pp.285-300
• /
• 2019

This research focuses on the characterization of an ordered semigroups (OS) in the frame work of generalized bipolar fuzzy interior ideals (BFII). Different classes namely regular, intra-regular, simple and semi-simple ordered semigroups were characterized in term of $({\alpha},{\beta})$-BFII (resp $({\alpha},{\beta})$-bipolar fuzzy ideals (BFI)). It has been proved that the notion of $({\in},{\in}{\gamma}q)$-BFII and $({\in},{\in}{\gamma}q)$-BFI overlap in semi-simple, regular and intra-regular ordered semigroups. The upper and lower part of $({\in},{\in}{\gamma}q)$-BFII are discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.1
• /
• pp.321-340
• /
• 2016

The Compressive Video Sensing (CVS) is a useful technology for wireless systems requiring simple encoders but handling more complex decoders, and its rate-distortion performance is highly affected by the quantization of measurements and reconstruction of video frame, which motivates us to presents the Space-Time Quantization (ST-Q) and Motion-Aligned Reconstruction (MA-R) in this paper to both improve the performance of CVS system. The ST-Q removes the space-time redundancy in the measurement vector to reduce the amount of bits required to encode the video frame, and it also guarantees a low quantization error due to the fact that the high frequency of small values close to zero in the predictive residuals limits the intensity of quantizing noise. The MA-R constructs the Multi-Hypothesis (MH) matrix by selecting the temporal neighbors along the motion trajectory of current to-be-reconstructed block to improve the accuracy of prediction, and besides it reduces the computational complexity of motion estimation by the extraction of static area and 3-D Recursive Search (3DRS). Extensive experiments validate that the significant improvements is achieved by ST-Q in the rate-distortion as compared with the existing quantization methods, and the MA-R improves both the objective and the subjective quality of the reconstructed video frame. Combined with ST-Q and MA-R, the CVS system obtains a significant rate-distortion performance gain when compared with the existing CS-based video codecs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.445-446
• /
• 2010

In Gen-2 Q-algorithm, the initial value of $Q_{fp}$, which is the slot-count parameter, is not defined in the standard. In this case, if we let the initial $Q_{fp}$ be large, the number of empty slot will be large during the initial query round. On the other hand, if the initial $Q_{fp}$ is small, almost all the slots will be collided. As a result, it is anticipated that the performance will be declined because the frame size does not converge to the optimal point quickly during the query round. In this paper, we analyze how the performances of Gen-2 Q-algorithm will be affected by the initial slot-count size.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.242-247
• /
• 2012

In the determination of suitable frame sizes associated with dynamic framed slotted Aloha used in radio frequency identification tag identification processes, the widely imposed constraint $L=2^Q$ often yields inappropriate values deviating far from the optimal values, while a straightforward use of the estimated optimal frame sizes causes frequent restarts of read procedures, both resulting in long identification delays. Taking a trade-off, in this paper, we propose a new method for determining effective frame sizes where the effective frame size changes in a multiple of a predetermined step size, namely ${\Delta}$. Through computer simulations, we show that the proposed scheme works fairly well in terms of identification delay.