• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.114-120
• /
• 2008

This study is to compare and analyze the material flow, deformation characteristics, and forming load of flange by means of similitude experimental method of model material using plasticine. In order to find optimal forming conditions, prototype experiments were designed to investigate forming characteristics of general-purpose flange under various working conditions. As a result of prototype experiments, billet thickness and gap-height ratio was found to be the most influential experimental parameter in flange forming. Forming loads from prototype experiments were compared to the results of finite element analysis after conducting estimation of forming loads of real material. Results of prototype experiments based on model material techniques are expected to be used as a basic data of die design f3r the development of products and process.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.99-109
• /
• 2004

The purpose of the research is to discuss the product safety procedures for the food area. The producer and supplies of the products should be able to satisfy the needs of the increasing consumer safety. The products, for the purpose of developing and making safe products, must perform Hazard Finding and Risk Analysis to detect potential danger to mike sure the final safety measures are in place. The purpose of Product liability rests finally with the consumer safety and the manufacturer's capability compete in the marketplace. Especially this is important for the food industry. But, our domestic middle and small food industries, it is relatively weak in this are. Thus this research would like to present a easily usable product safety procedures.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.97-105
• /
• 2011

In order to determine home delivery service routes, conditions specified for each parcel such as customer-assigned delivery times and parcel contents should be considered, so the conventional route search algorithms have some limits to be applied for home delivery services. In this study, a multi-purpose route searching algorithm is suggested in order to deal with every requirement of deliveries that vary in delivery distances, contents and appointed times. A simulation study to verify the performances of the system with example data of Seoul and Kyungki provinces shows that it significantly improves the customer satisfaction and the productivity of delivery businesses.

• Journal of the Korean housing association
• /
• v.15 no.3
• /
• pp.117-126
• /
• 2004

The purpose of this study is to examine the characteristics of housing planning in 23 wards of the Tokyo Metropolitan Area. First, the present residential conditions in the 23 wards were investigated. And then we analyzed the basic purpose and individual policies of Housing Master Plan in the 4 wards. In this study, it was found that the basic purpose of Housing Master Plan can be classified into three parts: amenity, safety, and diversity. Analyzing the individual policies, it was found that the priority are given to safety and diversity out of the those three parts.

• Journal of the Korean housing association
• /
• v.15 no.3
• /
• pp.31-41
• /
• 2004

The purpose of this study is to find out the spatial arrangement of the administrative district of Seoung-Ju Eup around the 19th century by analyzing a map called Seoung-ju eupgido, made in the late Chosun period. The study analyses the significant elements consisting of the spatial arrangement such as geographical considerations, the street system, and the location of mainfacilities for this purpose. The significance of this study is in that the study uses a contemporary map showing the actual spatial arrangement in the period, instead of using any historical records or written documents that have been mainly used for the same purpose by most researcher so far.

• Journal of KIBIM
• /
• v.5 no.4
• /
• pp.23-29
• /
• 2015

The purpose of this study is to provide considerations for developing reverse engineering guidelines for AEC(Architecture, Engineering and Construction). The reverse engineering is a methodology which has the purpose of extracting and recognizing geometries and properties from physical objects such as buildings, facilities, terrain and infrastructure including roads, bridges, and tunnels. To handle them for the purpose of construction management, maintenance, and operation, we should know the exact position, orientation, and dimension of the objects including their properties. As the viewpoint of the information extraction from reverse engineering, it is necessary to derive consideration factors for developing reverse engineering guidelines.

• KIEAE Journal
• /
• v.2 no.1
• /
• pp.41-48
• /
• 2002

This study aims to investigate and evaluate the room acoustic designs of a multi purpose gymnasiums which do not use adjustable treatments in order to change the acoustical characteristics. Considering the main uses of gymnasium and auditorium, experiments were carried out using both nondirectional speakers on the stage and loudspeaker installed on the ceiling. The result from the study are as follows; Measured RT under unoccupied condition was a little longer than the expected value, therefore, in the case of occupied condition RT would be close to the optimum value. However, parameters that evaluate intelligibility and speech transmission property appeared to be low and have large differences depending on the measuring points, therefore, more effective sound reflecting surfaces and sound reinforcement systems should be considered.

• KIEAE Journal
• /
• v.13 no.3
• /
• pp.121-128
• /
• 2013

There is a rental housing policy in Korea to support low income citizen. However, the living condition of tenants through this rental program is not work for improving, unlike the initial purpose of providing rental housings. Rental housings, which were planned to improve the residential welfare and enhance self-reliance ability of low income groups and the elderly. It's not effective any more in terms of policy purpose. To solve this problem, plans are needed to support for the construction by Farm-Housing(FH) so that the residents of can support their self-reliance by promoting creating jobs and cooperation. This paper analyze and propose some solution in terms of legal system, financing and streamlining of planing process and permission to support FH program. The paper focus purpose to help identify a new area through such proposals and retain a power of leading technology by bridging the gap between the realistic aspect and ideal aspect.

• Journal of the Korean Home Economics Association
• /
• v.29 no.1
• /
• pp.97-110
• /
• 1991

The purpose of this study is to suggest more efficient modular units of the storage furniture system based on the two previous studies of the apartments storage furniture. This study is also to show the ways and means of making practical use of the results which come from the previous studies. The specific purpose of this study is, 1. To establish the modular furniture system minimizing the dead space, using investigation results of the bedroom size of existing apartments. 2. To establish the modular furniture system maximizing the storage space with utmost efficiency, based on the results of the actual storage condition from the previous research. 3. To suggest a case study of the different modular furniture system suiting 6 different bedroom sizes with the utmost efficiency, based on the results of above two purpose. On the bases of these research results, the design of various units of modular system furniture for bedrooms were suggested.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.376-379
• /
• 1993

GoldStar Industrial Systems Co. R & D center successfully developed the inverter for welding under the support of GoldStar Electric Machinery Co. Now, we are currently working on the mechanical part of articulated robot and a high-performance general purpose motion controller. By combining the above three items, we will be able to constitute the complete welding robot system on our own. In this article. the welding robot system currently under developing is introduced. The main focus will be placed on the development of general purpose motion controller with welding control module. Therefore, the architecture of welding robot controller where the general purpose motion controller is combined with the welding controller module will be explained. Here, the software system will be explained with regard to the hardware system.