• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.163-164
• /
• 2006

ZnO deposition parameters are not independent and have a nonlinear and complex properties respectively. Therefore, finding optimal process conditions are very difficult and need to do many experiments. To predict ZnO deposition result, neural network was used. To gather training data, Si, GaAs, and Glass were used for substrates, and substrate temperature, work pressure, RF power were $50-500^{\circ}C$, 15 mTorr, and 180-210 W respectively, and the purity of target was ZnO 4N. For predicting the result of ZnO deposition process exactly, sensitivity analysis and drawing a response surface was added. The temperature of substrate was evaluated as a most important variable. As a result, neural network could verify the nonlinear and complex relations of variables and find the optimal process condition for good quality ZnO thin films.

• Korean Journal of Veterinary Service
• /
• v.28 no.4
• /
• pp.393-405
• /
• 2005

In prion pathogenesis, the structural conversion of the cellular prion protein $(PrP^c)$ to its abnormal isomer $(PrP^{Sc})$ is believed to be a major event. The susceptibility or resistance to natural sheep scrapie is associated with polymorphisms of host PrP gene (PRNP) at amino acid residues 136, to a lesser extent 154. The 112 residue in ovine PrP displays a natural polymorphism, Methionine to Threonine, which has not been thoroughly investigated. However the cell-free conversion assay showed that ARQ with Thr112 $(T_{112}ARQ)^{1)}$ presents lower convertibility to $PrP^{Sc}$than wild type ARQ $(M_{112}ARQ)$ [1] In this study we generated ovine recombinant PrPs of 112 allelic variants by metal chelate affinity chromatography and cation exchange chromatography. The final purity of the ovine PrP ARQ was more than $95\%$. These variants showed similar immunoreactivity against anti-PrP monoclonal antibodies in Western blot and ELISA. The refolded $M_{112}ARQ$ and $M_{112}ARQ$ presented the secondary structural content to similar extent via CD spectroscopy analysis. The inherited structural features of $M_{112}ARQ$ and $M_{112}ARQ$ under the different biophysical conditions are in the middle of investigation.

• Korean Journal of Metals and Materials
• /
• v.48 no.4
• /
• pp.315-319
• /
• 2010

In this study, the hydrogen reduction behavior of ball-milled NiO nanopowder was investigated depending on the partial pressure of water vapor. The hydrogen reduction behavior was analyzed by thermogravimetry and hygrometry under heating to 873 K in hydrogen. In order to change the partial pressure of the water vapor, the dew point of hydrogen was controlled in the range of 248 K~293 K by passing high-purity hydrogen through a saturator that contained water. Interestingly, with the increase in the dew point of the hydrogen atmosphere, the first step of the hydrogen reduction process decreased and the second step gradually increased. After the first step, a pore volume analysis revealed that the pore size distribution in the condition with a higher water vapor pressure shifted to a larger size, whereas the opposite appearedat a lower pressure. Thus, it was found that the decrease in the pore volume during the chemical reaction controlled process at a dew point of 248 K caused a reduction in retardation in the diffusion controlled process.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.505-511
• /
• 2015

In this study, Arctigenin was obtained by using supercritical fluid extraction and bio-conversion process from Arctii Fructus. Arctigenin is efficacious in anti-inflammatory and anti-influenza. For this reason, Arctigenin is studied in various field. It was identified as 4-[(3,4-Dimethoxyphenyl)methyl)]dihydro-3-[(4-hydroxy-3-methoxyphenyl)methyl]-2(3H)-furanone (arctigenin) by FT-IR, $^1H$-NMR and the purity of it was 95.1 % by HPLC analysis. Arctigenin inhibited tyrosinase (up to $85.06{\pm}0.9%$ at $260{\mu}g/m{\ell}$ concentration) and melanin synthesis in a dose dependent manner (up to $51.1{\pm}3.7%$ at the concentration of $3.0{\mu}g/m{\ell}$). The results were better than arbutin. Therefore, it is expected that manufactured Arctigenin is useful for whitening cosmetics.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.622-628
• /
• 2013

Nanocrystalline spinel lithium manganese oxide ($LiMn_2O_4$) powders with narrow-size-distribution, pure-phase particles, and high crystallinity with an average crystallite size of about 70 nm were synthesized at $600^{\circ}C$ for 6 h in air by freeze drying method. Spinel $LiMn_2O_4$ is also prepared by sol-gel using citric acid as a chelating agent. The influence of different parameters such as pH conditions, solvent, molar ratio of citric acid to total metal ions, calcination temperature, starting material on the structure, morphology and purity of this oxide was investigated. The results of sol-gel method show that pure $LiMn_2O_4$ with average crystallite size of about 130 nm can be produced from nitrate salts as starting materials at $800^{\circ}C$ for 6 h in air. The optimum pH and molar ratio of chelating agent to total metal ions are $4{\leq}pH{\leq}6$ and 1.0, respectively. A possible mechanism on the formation of the nanocrystallines synthesized by sol-gel was also discussed. At the end a comparison of the differences between two methods was made on the basis of x-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) tests.

• Analytical Science and Technology
• /
• v.29 no.4
• /
• pp.194-201
• /
• 2016

The stability comparison tests on purified bee venom (PBV) and bee venom melittin (BVM) in different conditions of temperature, solvent, and concentration were studied. High purity BVM (98.2 %) was separated from PBV by prep-HPLC (column, C₄) and used to stability tests in aqueous phase. The stability of the PBV has been increased in the saline solution, while BVM was reduced. In distilled water, the stability of PBV has been reduced, while BVM showed an increasing result. As a result, the appropriate conditions for maintaining the long term stability of BVM were found to be the low temperature (4 ℃), distilled water, and concentration (1.0 mg/mL).

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.13-24
• /
• 2010

This study examined each handiwork method of 4 filigree artifacts from Neungsan-ri temple site in Buyeo, Korea through material characteristic and microstructure analysis. As a result, it was indicated that all of the artifacts have comparatively higher purity than 22.7K and some of filigree artifacts showed that gold is alloyed with silver at a certain ratio. Gold thread that decorates surface showed thickness of 0.2~0.8mm and displayed various forms of section. Gold granule indicated that 2 or 3 granules are adhered together and they are 0.3~0.8mm in diameter. Trace of soldering was observed from gold thread and gold granule joints on surface and it confirmed a possibility of being soldering using gold solder through componential analysis. Also, it reveals a surface decorated with pigments such as cinnabar(HgS) and black.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.175-184
• /
• 2012

A purpose of this research is to find out characteristic of bronze artifacts and gold ornaments excavated from Xiongnu tombs No. 2~4 at Duurlig Nars in Mongolia through scientific analysis of them. The Tombs are comparatively small. There were still lots of relics remaining although the tombs had been already robbed. Also the tombs are evaluated important since the origin of them show coexisting of chinese and northern style. First of all, an analysis result about bronze vessels found in this site, they have high lead(Pb) content and relatively low tin(Sn) content, as compared with the Bronze Han Mirror and End-fittings of Bronze Parasol Rib. Especially in case of bronze tray and bronze lamp from the no. 2 tomb and also bronze cauldron from the no. 4 tomb contain only 1wt% of tin which means binary alloy composition(Cu-Pb). Also, in the case of gold ornaments found in the no. 2 tomb, they have comparatively high purity. And the research suppose that the high possibility of that they were used soldering using alloy of Au-Cu or diffused bonding(using malachite and copper oxide) for joining gold grains of gold granulation ornament. Further scientific research and analysis in Mongolia and other countries will provide more clues to solve mystery of Xiongnu culture.

• The Journal of Korean Medicine
• /
• v.27 no.4
• /
• pp.150-155
• /
• 2006

Object : This study investigated the quality inspection of Schizandra chinensis (Turcz.) Bail distributed in Korea. Methods: To evaluate the quality of these herbal medicines, we carried out TLC pattern analysis, purity, loss on drying, ash, acid-insoluble ash, essential oil contents, dilute ethanol-soluble, water-soluble, ether-soluble extracts and HPLC analysis. Results : As a result, TCL pattern analysis of schizandrin and gomisin A showed Rf=0.64 and 0.74, respectively. To measured content of schizandrin and gomisin A, we quantitatively analyzed using HPLC. The average contents of schizandrin and gomisin A were detected to be 0.60 (${\pm}$0.02)% and 0.12 (${\pm}$0.004)%, respectively. Discussion : As a result of this study, we suggest that the minimum content of schizandrin and gomisin A should be 0.5% and 0.1%, respectively. We could suggest that the minimum of essential oil content should be 0.6 ml.

• Journal of Hydrogen and New Energy
• /
• v.20 no.2
• /
• pp.87-94
• /
• 2009

There are several types of compressors which are appropriate for hydrogen gas station. Diaphragm type of compressor is the one of them and it satisfies the requirements for that purpose in terms of maintaining gas purity and making high pressure over 700 bar. The objective of this study is to find an optimal design of oil distribution hole configuration. The number of holes is changed maintaining total cross-sectional area of holes. Five cases(1 hole, 4, 8,16 and 24 holes) were studied through Fluid Structure Interaction(FSI) analysis method. Gas and oil pressure, the deflection and stress of the diaphragm were analysed during compression and suction process respectively. There is no specific difference among the cases during compression. An additional deflection due to the existence of hole was found during suction for all case. But the highest deflection and stress were found in the 1 hole case. It was seen that 60% decrease of stress in magnitude in 24 hole case compare to the 1 hole case.