• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.04a
• /
• pp.167-173
• /
• 2006

Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently - often much more efficiently. We propose the blended deinking agent with cellulolutic enzymes and synthetic collector in deinking pulp of conventional alkaline method. The deinking efficiency of old news print in alkaline pH was enhanced with enzyme treatments. The brightness of deinked pulp was increased with less residual ink particles and yield of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method. Enzymes in biomass were use to Chemical Deinking for reduce environment pollution through surfactant and improve surfactants. examining into compatibility Enzymes and surfactants, these new materials are studied efficiency of deinking efficiency.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.197-204
• /
• 2010

Two studies were conducted to determine the effects of replacing 30% (% in diet DM) of lucerne (Medicago sativa L.) hay with citrus pulp in Merino ewe diets: i) an in vitro study which measured ruminal fermentation; and ii) an in vivo study in which twelve Merino ewes pre- and post-lambing were fed experimental diets in a cross-over design over 120 days to evaluate effects on ewe performance (i.e. DM intake, average daily gain (ADG) and wool growth). In both the in vitro and in vivo studies, the control treatment consisted of lucerne (91.3% in diet DM), lupins (8.3% in diet DM) and phosphate (0.42% in diet DM), while the citrus pulp treatment consisted of lucerne (57.7% in diet DM), lupins (9.5% in diet DM), phosphate (0.48% in diet DM) and fresh citrus pulp (32.3% in diet DM). Data were analysed using the mixed model procedure of SAS. In the in vitro study, gas production, total volatile fatty acid (VFA) yield, proportion of propionic acid to total VFA and in vitro dry matter digestibility (IVDMD) were higher (p<0.02) in the citrus pulp treatment compared to the control treatment. In contrast, in vitro ammonia production, pH and the acetate to propionate ratio were lower (p<0.03) for the citrus pulp treatment compared to the control treatment. In the in vivo study, DM intake of ewes fed the citrus pulp diet was lower than their control ewe counterparts throughout both the pre- and post-lambing periods (928.9 vs. 1,115.0 g/d pre-; 1,285.0 vs. 1,620.3 g/d post-lambing, p<0.01), however ADG was similar (p = 0.12). Wool growth parameters and lamb performance did not differ (p>0.32) between treatments. In summary, the in vitro study demonstrated that the replacement of 30% of a lucerne diet with fresh citrus pulp improved total VFA yield, increased total gas production and improved IVDMD, while decreasing the production of ammonia, acetic acid and rumen pH. In addition, the in vivo study demonstrated that the replacement of 30% of a lucerne diet with fresh citrus pulp pre- and post-lambing decreased intake but did not affect ewe performance in terms of ADG and wool growth. These findings, of course, would be of significant interest to sheep producers endeavouring to control cost of feed ingredients whilst maintaining productivity.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.5
• /
• pp.57-72
• /
• 1999

Traditional theories of the tensile failure of paper have assumed that uniform strain progresses throughout the sheet until an imperfection within the structure causes a catastrophic break. The resistance to tensile elongation is assumed to be elastic , at first, throughout the structure, followed by an overall plastic yield. However, linear image strain analysis (LISA) has demonstrated that the yield in tensile loading of paper is quite non-uniform throughout the structure, Traditional theories have failed to define the flaws that trigger catastrophic failure. It was assumed that a shive or perhaps a low basis weight area filled that role. Studies of the fracture mechanics of paper have typically utilized a well-defined flaw around which yield and failure could be examined . The flaw was a simple razor cut normal to the direction of tensile loading. Such testing is labeled mode I analysis. The included fla in the paper was always normal to the tensile loading direction, never at another orientation . However, shives or low basis weight zones are likely to be at random angular orientations in the sheet. The effects of angular flaws within the tensile test were examined. The strain energy density theory and experimental work demonstrate the change in crack propagation from mode I to mode IIas the initial flaw angle of crack propagation as a function of the initial flaw angle is predicted and experimentally demonstrated.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.50-57
• /
• 2014

In this study, we investigated the physical properties of kraft pulps made from rice husk, peanut husk and garlic stems. These agricultural byproducts were collected individually, and then various pulps were manufactured from them by controlling active alkali, sulfidity, reaction time and the liquor ratio in the kraft pulping process in order to analyze the applicability of these agricultural byproducts as raw materials for kraft pulps. After kraft pulping, we measured yield, flake content, fiber length, fiber width and freeness of pulps, and the fiber shapes of the pulps were observed by using an optical microscope. When the higher active alkali, longer reaction time and lower liquor ratio were applied in kraft pulping process, reject content decreased and fiber yield increased. The pulp from garlic stems had the longest fiber length and that from rice husk showed the highest intial freeness. All of the pulps from agricultural byproducts showed higher initial freeness, shorter fiber length and the similar fiber width compared to OCC, BCTMP and hardwood BKP. The fibers of the pulps made from agricultural byproducts showed a similar shape to those of commercial pulps. It was concluded that these agricultural byproducts had a potential as raw materials to produce an alternative pulp to the commercial pulps.

• Journal of Forest and Environmental Science
• /
• v.39 no.1
• /
• pp.27-39
• /
• 2023

Twenty-five Eucalyptus clones (14 E. camaldulensis - EC and 11 interspecific eucalypt hybrid clones - EH) grown in three contrasting sites were evaluated for the growth and few wood traits at 4 years of age. The stability, genotype-site interaction and suitability of these clones for pulp and solid wood industry sectors were studied. Growth of eucalypt clones was significantly higher at site 1 with higher rainfall, but wood density did not differ significantly from lower rainfall sites. Kraft pulp yield (KPY) decreased from sites 1 to 3 based on moisture availability, but not between two groups of clones. Volumetric shrinkage (VS) was significantly higher in EC clones at site 3 with lowest rainfall, but there was no specific trend at other two sites with maximum (site 1) and intermediate (site 2) rainfall. The mechanical traits modulus of rupture (MOR) and modulus of elasticity (MOE) were at par in sites 1 and 2, but significantly lower at the driest site 3. The growth rate had a significant positive correlation with KPY, MOR and MOE and a negative correlation with VS, but no significant impact on wood density in both groups of clones. Genotype×environment interaction (G×E) was evident in most traits due to the difference in response of clones to moisture availability. Since wood density was negatively correlated to KPY, it has to be kept at an optimum level for the profitability of pulp industry. There was no significant difference between EC and EH clones for most traits except VS at site 3. Stability of clones varied across sites in different traits, and hence clones may be selected for deployment at each site by screening for growth, followed by wood density, considering the relationship of growth and density with other traits required by pulp and solid wood industry sectors.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.1
• /
• pp.141-155
• /
• 2000

To examine how the difference of molecular weight distribution of cellulase influenced the beating process according to surface pore size of the fiber, high molecular weight enzyme and low one were applied to soft wood pulp, hard wood pulp, cotton linter pulp. Some enzymes with the distribution of low molecular weight penetrated into cellulose in the proportion of surface pore size and the results were negative as like : the low viscosity, decrease of refining Yield, decrease of fine fibers content and so on. But in cotton linter pulp in the small surface area, the fiber softness was increased and it had a positive result that the paper intensity was high. Other enzymes with the distribution of high molecular weight had an enzyme reaction on the most surfaces of cellulose. They were effective in eliminating the fuzz of hydrophile fine fibers and the freeness was increased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.1
• /
• pp.1-9
• /
• 1999

This study was performed to investigate the deinkability of Korean old newspaper(KONP) and the properties of newsprint made from deinked pulp with some addition of virgin pulp. When the samples of composed of 50% Australian old magazine(AuOMG) and 50% KONP were compared with the samples 50% AuOMG and 50% AuONP, the yield, opacity, strength properties of the former were high, but its brightness was low. When the mixing ratio of AuOMG : AuONP : KONP was 30:20:50, the brightness and strength properties were obtained the similar or better than those obtained samples having other mixing ratio. The brightness and opacity of samples made from deinked pulp with the some addition of TMP and BKP can meet the minium qualifications of brightness and opacity specified by Japanese Industrial Standard. The samples, which DIP, TMP, and KP were mixed with the ratio of the 85:10:5 and 90:5:5, maintained higher brightness and strength comparing to the samples containing higher amount of virgin pulp. Since the newsprint samples made from KONP was not inferior to those from imported old newspaper, the more use of KONP in producing newsprint is recommended.

• Food Science and Biotechnology
• /
• v.17 no.3
• /
• pp.470-474
• /
• 2008

The whole berry, pulp, and seed of sea buckthorn fruit were extracted with supercritical $CO_2$ to produce edible oils. The effects of extraction pressure, temperature, and $CO_2$ flow rate on the oil yield and extraction rate were investigated, and the fatty acid composition, tocopherol, and carotenoid contents of the oils were compared. The results showed that the extraction rate was affected by pressure, temperature, and $CO_2$ flow rate and, in general, the yield increased with a rise in any of the 3 variables. Fatty acids in the whole berry and pulp oil were dominated by monounsaturated fatty acids (>64%), followed by saturated fatty acids (about 30%). In contrast, fatty acids in the seed oil consisted mainly of polyunsaturated (>60%) and monounsaturated fatty acids (>24%). The seed oil had a slightly higher content of tocopherols, but a much lower content of carotenoids, compared with the whole berry or pulp oil.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.347-350
• /
• 2000

Enzymatic deinking of office-waste paper was studied using crude cellulase and papain-hydrolyzed cellulase from Trichoderma reesei Rut C-30 in small-scale and mid-scale. The results were compared with deinkings using commercial enzyme(Novozym 342) and conventional chemical methods. Maximum brightness and freeness were obtained at 3 units/g Oven Dry Paper(ODP) of CMCase activity using crude cellulase in mid-scale deinking experiments. The deinked pulp had higher physical strength and brightness, and lower freeness and yield than the pulp deinked in small scale. In small scale deinking, maximum brightness and freeness were obtained at 2 unit/g ODP. Deinking by papain-hydrolyzed cellulase showed similar results with one by Novozym 342. It was better in brightness and freeness, but showed lower physical strength and yield, than the conventional deinking by sodium hydroxide. The ratio of endo-1,4-glucanase and exo-1,4-glucanase components in papain hydrolyzed cellulase from T. reesei Rut C-30 was similar to that of commercial enzyme, Novozym 342, implicating a successful application as a deinking enzyme.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.2
• /
• pp.16-24
• /
• 1997

This experiment was mainly performed with a biological treatment of laser printed paper using enzyme, We got the following conclusions : In the case of nonionic surfactant treatment, brightness, residual ink contents and several strength properties of deinked paper were excellent at the low dosage of cellulase 0.05%. When mixed cellulase and xylanase was used, yield was increased as the dosage increased up to 0.2%, but brightness was decreased at the same condition. In contrast, deinking efficiency of anionic type was reduced in terms of brightness, residual ink contents, and tensile strength. As flotation time was increased, yield decreased and brightness increased slightly. On the other hand, the addition of surfactant during repulping process showed better result than that during flotation process.