• 대한화학회지
• /
• 제48권3호
• /
• pp.254-260
• /
• 2004

아세토니트릴 용매내에서 파라치환 염화벤조일류($p-CH_3$, p-H, $p-NO_2$)와 피리딘의 반응속도를 온도와 압력변화에 따라 전기전도도법으로 측정하여 유사 1차반응속도상수와 2차반응속도상수를 구하였다. 이들 반응속도상수로부터 활성화파라미터들(${\Delta}V{\ddagger},\;{\Delta}{\beta}{\ddagger},\;{\Delta}H{\ddagger},\;{\Delta}S{\ddagger},\;{\Delta}G{\ddagger}$ 과 Hammett ${\rho}$를 구하였다. 이때 ${\Delta}V{\ddagger},\;{\Delta}{\beta}{\ddagger}$ 및 ${\Delta}S{\ddagger}$는 모두 음의 값을 나타내었으며, 모든 압력 조건에서 기질의 치환기효과 ${\rho}_Y$는 양의 값을 나타내었다. 압력과 치환기 변화에 따른 속도론적 연구를 종합하면, 전체적인 반응은 전형적인 $SN_2$ 반응메카니즘을 따르며, 압력 증가에 따라 결합 형성이 더욱 촉진된 반응메카니즘으로 진행됨을 알 수 있다.

• 대한화학회지
• /
• 제37권6호
• /
• pp.577-584
• /
• 1993

아세토니트릴 용매내에서 파라치환 염화벤조일류와 피리딘류의 반응속도를 온도와 압력변화에 따라 전기전도도법으로 측정하여 유사1차반응속도상수와 2차반응속도상수를 구하였다. 이들 반응속도상수로부터 활성화파라미터들(${\Delta}V^\neq, {\Delta}{\beta}^{\neq}, {\Delta}H^{\neq}, {\Delta}S^{\neq} {\Delta}G^{\neq}$)과 Hammett ρ를 구하였다. 이때 ${\Delta}V^\neq, {\Delta}{\beta}^{\neq}및 {\Delta}S^{\neq}$는 모두 음의 값을 나타내었으며, 모든 압력 조건에서 친핵체의 치환기 효과 ρ$_X$는 음의 값을 기질의 치환기효과 ρ$_Y$는 양의 값을 나타내었다. 압력과 치환기 변화에 따른 속도론적 연구를 종합하면, 전체적인 반응은 전형적인 S$_N$2 반응메카니즘을 따르며, 압력 증가에 따라 결합형성이 더욱 촉진된 반응메카니즘으로 진행됨을 알 수 있다.

• Archives of Pharmacal Research
• /
• 제22권2호
• /
• pp.219-224
• /
• 1999

In our search for the anticonvulsant consitutent of Gastrodia elata repeated column chromatographies guided by activity assay led to isolation of an active compound, which was identified as gastrodin on the basis of spectral data. Brain succinic semialdehyde dehydrogenase (SSADH) was inactivated by preincubation with gastrodin in a time-dependent manner and the reaction was monitored by absorption and fluorescene spectroscopic methods. The inactivation followed pseudo-first-order kinetics with the second-rate order constant of $1.2{\times}10^{3} M^{-1} min^{-1}$. The time course of the reaction was significantly affected by the coenzyme NAD^{+}$, which affected complete protection against the loss of the catalytic activity, whereas substrate succinic semialdehyde failed to prevent the inactivation of the enzyme. It is postulated that the gastrodin is able to elevate the neurotransmitter GABA levels in central nervous system by inhibitory action on one of the GABA degradative enzymes, SSADH.

• 한국환경과학회지
• /
• 제24권5호
• /
• pp.671-678
• /
• 2015

The adsorption characteristics of Sr and Cs ions were investigated by using PS-zeolite beads prepared by immobilizing zeolite with polysulfone (PS). The adsorption kinetics of Sr and Cs ions by PS-zeolite beads was described well by the pseudo-second-order model. The maximum adsorption capacities of Sr and Cs ions calculated from Langmuir isotherm model were 65.0 mg/g and 76.4 mg/g, respectively. In the binary system of Sr ion and Cs ion, the adsorption capacities of each ion decreased with increasing mole ratio of mixed counterpart ion, and Cs ion showed the higher hinderance than Sr ion. We found that thermodynamic properties of Sr and Cs ions on absorption reaction were spontaneous and endothermic at 293 to 323 K.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권5호
• /
• pp.128-134
• /
• 2017

This work presents the adsorption capability of green tea and ginseng leaves to adsorb heavy metals such as Cd(II), Cu(II), and Pb(II) in aqueous solution. FT-IR analysis indicates the presence of oxygen containing functional groups (carboxyl groups) in two kinds of leaves. High pH condition was favorable to the adsorption of heavy metal ions due to the enhanced electrostatic attraction and the precipitation reaction of metal ions. The adsorption of Cd(II), Cu(II), and Pb(II) reached equilibrium within 10 min, achieving high removal efficiencies of 80.3-97.5%. The adsorption kinetics data of heavy metal ions were fitted well with the pseudo-second-order kinetic model. The maximum adsorption amounts of Cd(II), Cu(II), and Pb(II) ions were 8, 3.5, and 15 mg/g, respectively, in the initial concentration range from 0.15 to 0.75 mM. Based on the fitting data obtained from isotherm models, heavy metal adsorption by green tea and ginseng leaves could occur via multi-layer sorption.

• Environmental Engineering Research
• /
• 제18권3호
• /
• pp.163-168
• /
• 2013

In this study, an innovative media, iron mixed ceramic pellet (IMCP) has been developed for arsenic (As) removal from groundwater. A porous, solid-phase IMCP (2-3 mm) was manufactured by combining clay soil, rice bran, and Fe(0) powder at $600^{\circ}C$. Both the As(III) and As(V) adsorption characteristics of IMCP were studied in several batch experiments. Structural analysis of the IMCP was conducted using X-ray absorption fine structure (XAFS) analysis to understand the mechanism of As removal. The adsorption of As was found to be dependent on pH, and exhibited strong adsorption of both As(III) and As(V) at pH 5-7. The adsorption process was described to follow a pseudo-second-order reaction, and the adsorption rate of As(V) was greater than that of As(III). The adsorption data were fit well with both Freundlich and Langmuir isotherm models. The maximum adsorption capacities of As(III) and As(V) from the Langmuir isotherm were found to be 4.0 and 4.5 mg/g, respectively. Phosphorus in the water had an adverse effect on both As(III) and As(V) adsorption. Scanning electron microscopy results revealed that iron(III) oxides/hydroxides are aggregated on the surface of IMCP. XAFS analysis showed a partial oxidation of As(III) and adsorption of As(V) onto the iron oxide in the IMCP.

• 한국물환경학회지
• /
• 제28권2호
• /
• pp.197-201
• /
• 2012

The objective of this study was to evaluate the removal efficiency of arsenite and arsenate using composite adsorbents with various mixing ratio of recycled aluminum oxides and $TiO_2$. From batch adsorption experiments, while the removal of As(III) was almost same with 4 different composite samples in the entire pH range, the removal of As(V) was substantially increased as the weight ratio of $TiO_2$ in composite samples reduced and showed anionic adsorption characteristics. Both adsorption of As (III) and As(V) on composite samples followed pseudo-second-order adsorption equation and C-3 showed faster reaction rate for the removal of arsenic. From the adsorption isotherm experiments, Langmuir isotherm explained well and the maximum adsorption capacities of arsenic were obtained with C-1.

• 자원리싸이클링
• /
• 제15권5호
• /
• pp.38-46
• /
• 2006

The removal of arsenic(V) using four different natural minerals were evaluated. Parameters like contact time, pH, adsorbent dosages, and As(V) concentration were optimized. The kinetics of adsorption was observed to be fast and reached equilibrium within 2h. As(V) adsorption on studied minerals was dependent on pH and followed a pseudo-second-order reaction model. For kaolin, maximum adsorption was found at pH 5.0. Whereas, in case of other three minerals, a pH range of 6.0-7.0 was found to be the best for As(V) adsorption. The maximum adsorption capacity (Q) was calculated by fitting Langmuir equation to the adsorption isotherms obtained under a specified condition. From the slope of best fit, the Q values were calculated to be 2.07, 2.15, 1.95 and 0.86 mg As(V)/g of bauxite, wad, iron ore and kaolin, respectively. Desorption of As(V) from loaded materials was dependent on the type of leaching reagents used. Based on the results, it was found that among the studied natural minerals, wad was the best As(V) adsorbent.

• Environmental Engineering Research
• /
• 제21권1호
• /
• pp.99-107
• /
• 2016

The adsorption of inorganic mercury, Hg (II), in aqueous solution has been investigated to evaluate the effectiveness of synthesized gold (Au) nanoparticle-coated silica as sorbent in comparison with activated carbon and Au-coated sand. The synthesis of the Au-coated silica was confirmed by x-ray diffraction (Bragg reflections at $38.2^{\circ}$, $44.4^{\circ}$, $64.6^{\circ}$, and $77.5^{\circ}$) and the Au loading on silica surface was $6.91{\pm}1.14mg/g$. The synthesized Au-coated silica performed an average Hg adsorption efficiency of ~96 (${\pm}2.61$) % with KD value of 9.96 (${\pm}0.32$) L/g. The adsorption kinetics of Hg(II) on to Au-coated silica closely follows a pseudo-second order reaction where it is found out to have an initial adsorption rate of $4.73g/{\mu}g/min/$ and overall rate constant of $4.73{\times}10^{-4}g/{\mu}g/min/$. Au-coated silica particles are effective in removing Hg (II) in aqueous solutions due to their relatively high KD values, rapid adsorption rate, and high overall efficiency that can even decrease mercury levels below the recommended concentrations in drinking water.

• Membrane and Water Treatment
• /
• 제13권5호
• /
• pp.227-233
• /
• 2022

The objective of the study, to develop adsorbent based purifier for removal of radiological and nuclear contaminants from contaminated water. In this regard, 3-aminopropyl silica functionalized with ethylenediamine tetraacetic acid (APS-EDTA) adsorbent prepared and characterized by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD). Prepared APS-EDTA used for adsorptive studies of Cs(I), Co(II), Sr(II), Ni(II) and Cd(II) from contaminated water. The effect on adsorption of various parameters viz. contact time, initial concentration of metal ions and pH were also analyzed. The batch method has been employed using metal ions in solution from 1000-10000 ㎍/L, contact time 5-60 min., pH 4-10 and material quantities 50-200 mg at room temperature. The obtained adsorption data were used for drawing Freundlich and Langmuir isotherms model and both models were found suitable for explaining the metal ions adsorption on APS-EDTA. The adsorption data were followed pseudo second order reaction kinetics. The maximum adsorption capacity obtained 1.3037-1.4974 mg/g for above said metal ions. The results show that APS-EDTA have great potential to remove Cd(II), Co(II), Cs(I), Ni(II) and Sr(II) from aqueous solutions through chemisorption and physio-sorption.