• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.378-386
• /
• 2017

A return-to-zero (RZ) digital-to-analog converter (DAC) with a tri-state switching scheme is proposed in this paper. The proposed scheme provides a triple weight output for RZ operation by using a conventional differential current switch and simple pseudo-differential F/Fs. The RZ function is realized with only two additional transistors in each F/F cell, which results in a power dissipation increase of less than 5%. To verify the performance of the proposed method, a 10-bit RZ DAC is fabricated using standard 180-nm CMOS technology. Measured results show that the worst SFDR performances are 60 dBc and 55 dBc in the 1st and 2nd Nyquist bands, respectively, when operating at 650 MHz clock frequency. The total power consumption is 64 mW, and the active area occupies $0.25mm^2$.

• Economic and Environmental Geology
• /
• v.27 no.3
• /
• pp.263-279
• /
• 1994

Paleomagnetic and rock-magnetic data of Cretaceous sedimentary and volcanic rocks from the Euiseong area indicate that the stable components of remanence are carried by single and pseudo-single domain magnetite, with the exception of the Shinyangdong Formation which has been remagnetized. The Hayang Group, except for the remagnetized Shinyangdong Formation, yields the mean characteristic direction of $D/I=22.5^{\circ}/57.2^{\circ}$ (${\alpha}_{95}=4.6^{\circ}$, N=14 sites) and the pole position is $72.0^{\circ}N$, $206.4^{\circ}E$ ($dp/dm=4.9^{\circ}/6.7^{\circ}$). The Yucheon Group shows two polarities and the mean characteristic direction of $D/I=351.2^{\circ}/60.5^{\circ}$ (${\alpha}_{95}=11.2^{\circ}$, N= 19 sites) and the pole position is $81.3^{\circ}N$, $79.0^{\circ}E$ ($dp/dm=13.0^{\circ}/17.0^{\circ}$). The mean directions of both the Hayang and the Yucheon Groups are supported by the McElhinny's fold test at the 99% confidence level and that of the Yucheon Group by a reversal test at the 95% confidence level. A magnetostratigraphic correlation between polarities of the study formations and the Geomagnetic Time Scale indicates that the Hayang Group can be correlated to the Cretaceous Long Normal Superchron (CLNS), and the Yucheon Group to the boundary between the CLNS and the Polarity Chron 33R or later boundaries between normal and reverse polarities. Comparison of the paleopoles from this study with those from the surrounding areas both within the Gyeongsang basin and in the northeastern Asia indicates that the study area was not undergone significant tectonic rotations with respect to the other parts of the Gyeongsang basin and that the Korean Peninsula was the part of the single terrane of the northeastern Asia at least since the CLNS. The Yucheon Group can be divided into four sub-groups based on the paleomagnetic data, suggesting that there were at least four times of volcanic activities in the study area.

• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.224-230
• /
• 2016

The use of new words, numerous spoken languages, and abbreviations on the Internet is extensive. As such, automatically acquiring words for the purpose of analyzing Internet content is very difficult. In a previous study, we proposed a method for Japanese word segmentation using character N-grams. The previously proposed method is based on a simple state-transition model that is established under the assumption that the input document is described based on four states (denoted as A, B, C, and D) specified beforehand: state A represents words (nouns, verbs, etc.); state B represents statement separators (punctuation marks, conjunctions, etc.); state C represents postpositions (namely, words that follow nouns); and state D represents prepositions (namely, words that precede nouns). According to this state-transition model, based on the states applied to each pseudo-word, we search the document from beginning to end for an accessible pattern. In other words, the process of this transition detects some words during the search. In the present paper, we perform experiments based on the proposed word acquisition algorithm using Japanese and Chinese newspaper articles. These articles were obtained from Japan's Kyoto University and the Chinese People's Daily. The proposed method does not depend on the language structure. If text documents are expressed in Unicode the proposed method can, using the same algorithm, obtain words in Japanese and Chinese, which do not contain spaces between words. Hence, we demonstrate that the proposed method is language independent.

• Journal of Aerospace System Engineering
• /
• v.14 no.3
• /
• pp.17-23
• /
• 2020

In this paper, the efficient periodic unsteady flow analysis is developed by using a Chebyshev collocation operator applied to the time differential term of the governing equations. The partial implicit time integration method was also applied in the governing equation for a fluid, which means flux terms were implicitly processed for a time integration and the time derivative terms were applied explicitly in the form of the source term by applying the Chebyshev collocation operator. To verify this method, we applied the 1D unsteady Burgers equation and the 2D oscillating airfoil. The results were compared with the existing unsteady flow frequency analysis technique, the Harmonic Balance Method, and the experimental data. The Chebyshev collocation operator can manage time derivatives for periodic and non-periodic problems, so it can be applied to non-periodic problems later.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.239-248
• /
• 2006

In this paper, the cryogenically cooled low noise amplifier module for radio telescope receiver front-end using pHE-MT MMIC is designed and fabricated. In the selection of MMIC, the MMIC fabricated with the pHEMTS providing successful cryogenic operation are chosen. They are mounted in the housing using the thin film substrate. In the design of the housing, the absorber and the elimination of the gap between the carrier and the housing as well removed the unnecessary oscillations by its structure. The mismatch is improved by ribbon-tuning to provide the best performance at room temperature. The fabricated module shows the gain of $35dB{\pm}1dB$ and the noise figure of $2.37{\sim}2.57dB$ at room temperature over $21.5{\sim}23.5GHz$. In the cryogenic temperature of $15^{\circ}K$ cooled by He gas, the measured gain was above 35 dB and flatness ${\pm}2dB$ and the noise temperatures of $28{\sim}37^{\circ}K$.

• Journal of Computational Design and Engineering
• /
• v.2 no.1
• /
• pp.55-66
• /
• 2015

To satisfy safety regulations of Economic Commission for Europe (ECE), the surface regions of automobile parts must have a sufficient degree of roundness if there is any chance that they could contact a sphere of 50.0 mm radius (exterior parts) or 82.5 mm radius (interior parts). In this paper, a new offset-based method is developed to automatically detect the possible sphere-contacting shape of such parts. A polyhedral model that precisely approximates the part shape is given as input, and the offset shape of the model is obtained as the Boolean union of the expanded shapes of all surface triangles. We adopt a triple-dexel representation of the 3D model to enable stable and precise Boolean union computations. To accelerate the dexel operations in these Boolean computations, a new parallel processing method with a pseudo-list structure and axis-aligned bounding box is developed. The possible sphere-contacting shape of the part surface is then extracted from the offset shape as a set of points or a set of polygons.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.99-105
• /
• 2010

The electrical transport properties of mayenite ($Ca_{12}Al_{14}O_{33}$ or $12CaO{\cdot}7Al_2O_3$; mostly abbreviated as $C_{12}A_7$) can be controlled in a wide range by varying the oxygen deficiency: At high temperatures mayenite becomes either an oxygen solid electrolyte, a mixed ionic/electronic conductor or an inorganic electride with metal-like properties upon chemical reduction (removing oxygen). The underlying defect chemistry can be understood on the basis of a relatively simple model-despite the complex cage structure: A point defect model based on the assumption that the framework $[Ca_{12}Al_{14}O_{32}]^{2+}$ acts as a pseudo-donor describes well the high temperature transport properties. It accounts for the observed conductivity plateau at higher oxygen activities and also describes the experimentally observed oxygen activity dependence of the electronic conductivity with -1/4 slope at temperatures between 800 and $1000^{\circ}C$. Doping effects in mayenite are still not well explored, and we review briefly the existing data on doping by different elements. Hydration of mayenite plays a crucial role, as Mayenite is hygroscopic, which may be a major obstacle for technical applications.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.4
• /
• pp.15-20
• /
• 1992

This study was carried out to improve the method of tapping sap from Betula platyphylla Sukatschev, Betula costata Trautv., Betula schmidtii Regel, Betula davurica Pallas, Betula ermanii Cham, Acer mono Maxim and Acer pseudo-sieboldianum Kom and to use it to natural drinks. The mal or results are as follows: 1. It is no difference of the amount of sap by tapping methods and species of trees. The larger D.B.H. is, the more amount of sap can be gotten. So we thought that the best tapping method is hole-drilling to prevent trees from damage. 2. Sap contains sugars and mineral materials. Birches have glucose and fructose, much more mineral materials than maples. Sugar of maples is mainly sucrose. 3. We assume that mineral materials of birches are effective to urination, to make a stong dody and sucrose of maples is effective to recover from one's fatigue by controlling the blood sugar. 4. In vacuum packing after sterilizing the sap in low temperature, it could be stored more 1 year. So, it is possible that sap will be commercialized.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.784-789
• /
• 2009

We propose a novel method of procedurally generating climbing plants using L-systems. The goal of this research is to generate geometry for 3D-modelers, where procedurally generated content is used as a base for the final design. The algorithm is fast and efficiently simulates external tropisms such as gravitropism and heliotropism, as well pseudo-tropisms. The structure of the generated climbing plants is discretized into strings of particles expressed using L-systems. The tips of the plant extend the branches by adding particles in its path, forming internodes. A climbing heuristic has been developed that uses the environment as leverage when the plant is climbing, and effectively covers objects on which it grows. A fast method that sprouts leaves on the surface on which the plant is growing has also been developed, along with a heuristic that simulates the decrease in length, radius and leaf size.

• Journal of Communications and Networks
• /
• v.9 no.1
• /
• pp.50-55
• /
• 2007

We propose to apply chip interleaving and iterative detection to self-encoded multiple access (SEMA) communications. In SEMA, the spreading code is obtained from user bit information itself without using a pseudo noise code generator. The proposed scheme exploits the inherent diversity in self encoded spread spectrum signals. Chip interleaving not only increases the diversity gain, but also enhances the performance of iterative detection. We employ user-mask and interference cancellation to decouple self-encoded multiuser signals. This paper describes the proposed scheme and analyzes its performance. The analytical and simulation results show that the proposed system can achieve a 3 dB power gain and possess a diversity gain that can yield a significant performance improvement in both Rayleigh and multipath fading channels.