• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.103-110
• /
• 1997

The objective of this study is to provide the information on the small-scale model mix proportion when the behavior of prototype concrete pavement is studied through small-scale model experiments. However it is difficult to obtain a model material to simulate the prototype concrete by scaling the individual components according to the laws of similitude. In this paper, the stress-strain behavior in uniaxial compression is used as a means to correlate materials similitude between the prototype and the model concrete. Based on th results of experiments, We compared the stress-strain curves of prototype and model concrete mixes using a nondimensional basis. In order to simulate the stress-strain curves of prototype concrete, it is important that various mix as of model concrete selected properly which are varied from aggregate grading, cement-aggregate and sand-aggregate ratio.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.174-181
• /
• 2004

This paper presents the development of a magnetostrictive microactuator. The structural and functional requirements are as follows: it must be a millimeter structure and must achieve controllable displacement with nanometer resolution. Finite Element Analysis(FEA) is used to determine the structure with the most uniform and highest magnetic flux density along the Terfenol-D rod. The microactuator prototype 1 is designed and made based on the FEA. It is observed that the microactuator show some level of hysteresis and that it produces 25 newton in force and 3 ${\mu}{\textrm}{m}$ in displacement with 1.5 amperes of current, and resolution of 250 nm per 0.1 amperes. To improve the performance of the microactuator prototype 1, microactuator prototype 2 is made again with a permanent magnet (PM). It is observed that the microactuator prototype 2 gene.ates 3.3 ${\mu}{\textrm}{m}$ in displacement with 0.9 amperes of current. It means that the microactuator prototype 2 performs better than the microactuator prototype 1.

• 농촌계획
• /
• 제16권4호
• /
• pp.117-129
• /
• 2010

This study is to make value estimating system to valuate prototype landscape of rural and to derive itemized importance to select priority preservable object The results of the study are summarized as follows, It is examined value estimating standard by analyzing prototype landscape related previous study, law and order. Also, It is derived conclusive prototype landscape value estimating system by doing attribute assessment of preserving objects while surveying the site and interviewing professionals, Value estimating system is classified into five items of physical value which are integration, harmony, diversity, symbolism and aesthetics, The historical-cultural value are divided into four categories which are religious value, originality, historicity and scarcity, The communal values are divided into three categories which are sociality, continuing and regional locality and also divided into three categories which are rarity, primitiveness and diversity as the ecological value, Relative priority of prototype landscape value estimating system result is derived as historical-cultural value as the superior position and physical value, communal value and ecological value as the priority order. In the subordinate, historical categories are derived to be the most valuable and originality, symbolism, integration, regional locality, continuing, harmony, aesthetics, religious value, primitiveness, diversity of physical values and diversity of ecological value in order of the priority assessment The results of the study have the meaning of practical use in prior selection and preservation plan of preserving prototype landscape as practical alternative plan for systematical preservation of damaging prototype landscape.

• Journal of Biosystems Engineering
• /
• 제29권1호
• /
• pp.9-20
• /
• 2004

On the basis of design theory of soil inversion, two types of moldboard plow with secondary soil mover was designed and constructed to invert furrow slice at same position with furrow bottom. A series of soil bin experiment was carried to investigate the performance of prototypes. First prototype of new concept plow showed two kinds of problems during the preliminary experiment. For the plowing depth of 6cut the prototype did not invert the furrow slice, instead it just cut furrow bottom and the furrow slice returned to the original position. For the plowing depth of 8cm, there was soil clogging problem at the rear part of plow. From the above results it was concluded that the first prototype can not be used for the inversion of furrow slice at same position with furrow bottom. Second prototype could invert furrow slice at the same position with furrow bottom, but the performance was affected by soil moisture content soil hardness and plowing speed very much. For the higher soil moisture content, for the higher soil hardness and higher plowing speed, the prototype showed higher soil inversion performance. For the second prototype the inversion ratio was almost 100%, inversion angle was in the range of 90 to 100 degree and side displacement was less than 4 cm. But the furrow slice was not continuous, it was cut in the length of 30 to 40 cm. The reason why the furrow slice was cut in that length is blamed for the design of moldboard surface. The specific draft of prototype was in the range of 37.24 kN/㎡ to 42.14 kN/㎡ this value is a little higher than that of the conventional plow, or from 30.38 kN/㎡ to 33.32 kN/㎡. But the difference was not so big. The inversion performance of the second prototype for the field experiment was much better than that of soil bin experiment due to the better soil and operational conditions. Sticky and compacted soil conditions, and higher plowing speed was suitable for the plowing operation of the second prototype

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.311-319
• /
• 2018

Purpose: The aim of this study is to develop a small combine for harvesting miscellaneous cereal crops. Methods: A prototype small combine was designed and constructed. Its specifications and basic performance were investigated. Results: The prototype small combine for harvesting miscellaneous cereal crops was designed and constructed to reflect similar specifications as those of the conventional combine. The prototype small combine comprises a diesel engine with the rated power/speed of 22.0 kW/2,600 rpm, three-stage primary and two-stage speed range transmission shifts, and a double acting threshing part. The maximum travel speeds of the prototype combine are approximately 0.72 m/s, 2.50 m/s, 0.30 m/s at the low, high speed range shifts in the forward direction, and while traversing in the reverse direction, respectively. The minimum radius of turning was approximately 1.50 m. In a static lateral overturning test, the prototype combine overturned neither to the right nor to left on a $30^{\circ}$ slope. The results of an oilseed rape harvesting test included the maximum operating speed of 0.32 m/s, the grain loss ratio of approximately 9.0%, and the effective field capacity of approximately 10.3 a/h. Additionally, among the outputs in grain outlet, the whole grains, damage grains, and materials other than grain (MOG) ratios accounted for 97.4%, 0.0%, and 2.6%, respectively. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops indicates good driving ability and stability. The results of the oilseed rape harvesting test reveal that the harvesting performance must be enhanced such that the separating and cleaning parts are more suitable for each type of crop, thus reducing grain loss and foreign substances among the outputs in grain outlet. An improved small prototype combine could be used effectively to mechanize the harvesting of miscellaneous cereal crops in small family farms or semi-mountainous areas.

• 패션비즈니스
• /
• 제7권6호
• /
• pp.32-49
• /
• 2003

The purpose of this study is to examine the characteristics and differences of Chinese adult women's torsos by sampling Chinese college women and measuring their torsos and thereupon, develop a torso prototype fitting their torso characteristics and thereby, improve the fitness of the clothing products exported to China. For this purpose, body sizes were comparatively measured between Chinese and Korean college women to determine the differences of body shapes between the two groups, and thereupon, a torso prototype was produced. Then, the prototype was checked with senses, and was modified and complemented three times. In the final torso prototype, waist front and back length was reduced in consideration of Chinese women's body shapes, and neck side - nipple length was extended because Chinese women's chests are pushed out, and additionally, front shoulder dart volume was readjusted. In addition, the fitness of the prototype was tested by setting the S and L size intervals as well as the basic size (M). It is hoped that the results of this study would be useful to the Korean clothing companies exporting their products to China.

• 한국의류학회지
• /
• 제31권4호
• /
• pp.531-539
• /
• 2007

The purpose of this article was to determine how the current auto mechanic's coverall restricts movements, to develop prototype coverall, and finally, to improve working efficiency. To investigate the problem and complaint of current coveralls, 35 mechanics were interviewed. Video captured method was used to analyze the representative movement. Based on the previous investigation, the prototype coverall was developed. Pleats and band were inserted on each side of the back, under the armhole, and the back waist area for flexibility. To analyze the mobility of current and prototype coveralls objectively, range-of-motion of selected movements was measured by Leighton flexometer and goniometer. Also, wearer acceptability scale was tested to investigate subjective preference of current and prototype coveralls. As subjects, 10 auto mechanics were participated. Order of testing was randomized. ANOBA and LSD were used for statistical analysis. As a results, prototype coverall was significantly different from current coverall at all test movements. Also, prototype coverall was significantly different from current coverall at 13 scales among 23 subjective scales. The results identified that prototype coverall design improved auto mechanic's body movement and subjective acceptability.

• 전자공학회논문지
• /
• 제51권4호
• /
• pp.101-109
• /
• 2014

임의의 물체 영상에서 정확한 윤곽선을 찾아내는 것은 영상 처리 관련 시스템을 구축하는데 있어 필수적인 요소이다. 특히, 자동화된 생산 공정에서 생산품의 검사를 위한 비전시스템을 구축하다면 직선, 원 등의 정형화된 모형에 대한 윤곽선의 검출이 매우 중요하다. 본 논문에서는 원형(prototype) 에너지를 추가하여 개선된 윤곽선 추출 알고리즘으로 원형적응 동적윤곽선 모델, p-Snake를 제안한다. 제안 방법은 원형분석을 위하여 물체 영상에 소벨 연산을 수행한 후, 기존 스네이크 알고리즘을 적용하여 초기 윤곽선을 찾는다. 이후 초기 윤곽선 정보에 근거하여 직선, 원 등의 원형(prototype)을 분석하고, 원형 에너지를 정의하여 기존의 스네이크 함수에 추가적인 에너지 항목으로 사용함으로써 물체의 최종 윤곽선을 검출하였다. 산업현장의 배경을 가정한 환경에서 취득된 340장의 영상에 대하여 실험한 결과, 잡음이나 조명 등의 이유로 물체와 배경의 구분이 선명하지 않거나 영상에서 에지가 충분히 존재하지 않는 경우에도 윤곽선을 추출할 수 있음을 확인할 수 있었다. 또한 원형(prototype)과 얼마나 일치하는 가를 나타내는 척도인 유사도의 경우, 제안한 p-ACM으로 추출한 윤곽선의 원형 유사도가 ACM의 처리 결과에 비해 9.85%가량 우수한 것으로 나타났다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제9권3호
• /
• pp.83-90
• /
• 2020

프로토타입 선택은 훈련 데이터로부터 클래스 영역을 대표하는 최소 데이터를 선택하여 낮은 학습 시간 및 저장 공간을 보장하는 장점을 제공한다. 본 논문은 모든 분류 알고리즘에 적용할 수 있는 초월 사각형을 이용한 새로운 훈련 데이터의 생성 방법을 설계한다. 초월 사각형 영역은 서로 다른 클래스 데이터를 포함하지 않으며 클래스 공간을 분할한다. 선택된 초월 사각형 내 데이터의 중간값은 프로토타입이 되어 새로운 훈련 데이터를 구성하고, 초월 사각형의 크기는 클래스 영역의 데이터 분포를 반영하여 조절된다. 전체 훈련 데이터를 대표하는 최소의 프로토타입 집합 선택을 위해 집합 덮개 최적화 알고리즘을 설계했다. 제안하는 방법에서는 탐욕 알고리즘과 곱셈 연산을 포함하지 않은 거리 계산식을 이용하여 집합 덮개 최적화 알고리즘의 다항 시간을 요구하는 시간 복잡도 문제를 해결한다. 실험에서는 분류 성능의 비교를 위해 최근접 이웃 규칙과 의사 결정 트리 알고리즘을 이용하며 제안하는 방법이 초월 구를 이용한 프로토타입 선택 방법보다 우수하다.

• 디자인학연구
• /
• 제13권3호
• /
• pp.181-190
• /
• 2000

최근 인간 중심의 디자인이 패러다임을 형성하면서 인터페이스 디자인에서도 사용자 이해를 위한 노력이 이루어지고 있다. 그러나 그래픽 인터페이스 디자인을 위한 체계적인 프로세스에 대한 연구는 부족한 실정이다. 따라서 본 논문에서는 사용자 중심의 인터페이스 디자인을 위하여 디자인 프로세스상에서 프로토타입을 활용하는 방법에 대해 연구가 이루어 졌다. 연구는 세 부분으로 구성되어 있다. 먼저 문헌 연구를 통해 프로토타입의 정의, 종류, 활용의 의의, 활용 기법에 관한 다각적인 자료를 정리 소개하였다. 그리고 두 번째로는, 이러한 이론적 배경지식이 프로토타입을 활용한 인터페이스 제품 개발의 프로세스의 모델에서 종합된다. 즉, 인터페이스 디자인에서의 프로토 타입은 아이디어 스케치부터 실제품 수준의 것까지 다양한 종류가 있으며, 디자인 프로세스의 각 단계에서 목적에 따라 그에 맞는 수준의 프로토타입이 개발되면 그에 맞는 방법으로 평가가 이루어지는 틀을 제시한다. 그리고 마지막으로는, 다중 참여 교육용 멀티미디어 제품 개발의 사례를 통해 앞에서 제시한 프로세스 모델의 구체적인 예를 보이고 검증한다.