• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.119-122
• /
• 2004

This mobile oriented Ad-hoc network yet steps on development level, related issues and standardization are progressing. This paper presented ad-hoc network's overview and overall property, followed by routing scheme that must be setup for communication between each nodes. Among several routing scheme proposed for standardization, ZRP that is foaled by this paper, is hybrid type algorithm, and only includes advantages of others This paper presented running process and implementation method, result that is made from network simulation, shows analysis of each parameter values's change. Each parameters changed with many differences according to Zone radius and communication node's location from simualtion that was performed changing a number of nodes and a velocity of nodes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.293-293
• /
• 2000

The SECS(SEMI Equipment Communications Standard) is a standard protocol for communication between equipments and a host in semiconductor processes. This paper proposes the implementation of the HSMS(High-speed SECS Message Services) as an interface for transmission of the SECS messages and SECS-II containing message contents defined as an SEMI standard. The HSMS driver is implemented as a type of the daemon program and several DLL files. The SECS-II composes of the SML(SECS Message Language) file defining the SECS messages, the SML translator being able to interpret and transform the SML, and the data index table being able to refer to SECS messages. We also define the shared parameter to exchange the HSMS header and SECS message between the HSMS and the SECS-II. Eventually, to show the effectiveness of the proposed drivers, we test the SECS communications between equipments and a host using the implemented communication programs.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.3
• /
• pp.308-314
• /
• 2003

This paper presents a serial communication based fault diagnosis scheme for a brushless DC (BLDC) motor using parameter estimation and Bayes classifier. The presented scheme consists of a smart network board, and a fault detection and isolation (FDI) master. The smart network board is installed near the BLDC motor drive system to acquire motor data and transmit motor data to the FDI-master via serial communication channel. The FDI-master estimates BLDC motor resistance to detect symptom of faults, and assign symptom to fault type using Bayes classifier. In this scheme, since communication time delay has a serious effect on performance, periodic and fixed communication protocol is designed. Hence, the delay time is priory known. By experiment result, presented scheme was verified.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.45-52
• /
• 2002

This paper presents fault detection scheme of Brushless DC(BLDC) motor drive system by estimating BLDC motor resistance using motor input and output data which is transmitted from data acquisition board to host computer over serial communication channel. Since communication time delay has a serious effect on performance, we use periodic and fixed communication protocol. Hence, the delay time is priory known. Simplified BLDC motor model and recursive least square algorithm is used for estimating motor resistance. By experiment result, we confirm the proposed scheme.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.307-311
• /
• 2010

EPCglobal Class-1 Gen-2 protocol has been proposed for UHF-band RFID systems. In Gen-2 standard, Q-algorithm was proposed to select a frame size for the next query round without estimating the number of tags. Therefore, the Q-algorithm has advantage that the reader's algorithm is simpler than other algorithms. However, it is impossible to allocate the optimized frame size. Also, the original Q-algorithm did not define an optimized parameter C for adjusting the frame size. In this paper, we propose an adaptive Q-algorithm with the different parameter $C_c$ and $C_i$ in accordance with the status of reply slot. Simulation results show that the proposed adaptive Q-algorithm outperforms the original Gen-2 Q-algorithm.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2667-2670
• /
• 2005

In this Paper is analyzed about FMS(Fieldbus Message Specification) service of FOUNDATION Fieldbus and designed using of UML(Unified Modeling Language). The FMS provides a number of services for reading, writing, and otherwise accessing objects. The FOUNDATION Fieldbus protocol is object oriented. The information in the devices is accessed in the form of objects. In FMS, the objects for configuring device and strategy in a node are listed in an object dictionary(OD). Each object is identified by an index. For example, every function block and every parameter has an index.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1025-1031
• /
• 2023

We aimed to evaluate the radiation dose and image quality by changing the Scout view voltage in low-dose chest CT (LDCT) and applying scan parameters such as AEC (auto exposure control) and ASIR (adaptive statistical iterative reconstruction) to find the optimal protocol. Scout view voltage was varied at 80, 100, 120, 140 kV and after measuring the dose 5 times using the existing low-dose chest CT protocol, the appropriate kV was selected for the study using the Dose report provided by the equipment. After taking a basic LDCT shot at 120 kV, 30 mAs, ASIR 50% was applied to this condition. Signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were assessed by measuring Background noise (B/N). For dose comparison, CTDI_vol and DLP provided by the equipment were compared and analyzed using the formulas. The results indicated that the protocol of scout 140 + LDCT + ASIR 50 + AEC reduced radiation exposure and improved image quality compared to traditional LDCT, providing an optimal protocol. As demonstrated in the experiment, LDCT screenings for asymptomatic normal individuals are crucial, as they involve concerns over excessive radiation exposure per examination. Therefore, applying appropriate parameters is important, and it is expected to contribute positively to the public health in future LDCT based health screenings.

• Journal of Korean Society on Water Environment
• /
• v.36 no.1
• /
• pp.48-54
• /
• 2020

This paper presents a screening protocol for the selection of solvents available for the solvent extraction desalination process. The desalination solvents hypothetically and theoretically require the capability of (1) Forming hydrogen bonds with water, (2) Absorbing some water molecules into its non-polar solvent layer, (3) Changing solubility for water-solvent separation, and (4) Rejecting salt ions during absorption. Similar to carboxylic acids, amine solvents are solvent chemicals applicable for desalination. The key parameter for selecting the potential solvent was the octanol-water partitioning coefficient (Kow) of which preferable value for desalination was in the range of 1-3. Six of the 30 amine solvents can absorb water and have a variable, i.e., temperature swing solubility with water molecule for water-solvent separation. Also, the hydrogen bonding interaction between solvent and water must be stronger than the ion-dipole interaction between water and salt, which means that the salt ions must be broken from the water and only water molecules absorbed for the desalination. In the final step, three solvents were selected as desalination solvents to remove salt ions and recover water. The water recovery of these three solvents were 15.4 %, 2.8 %, 10.5 %, and salt rejection were 76 %, 98 %, 95 %, respectively. This study suggests a new screening protocol comprising the theoretical and experimental approaches for the selection of solvents for the desalination method which is a new and challenges the desalination process in the future.

• The Journal of the Korea Contents Association
• /
• v.20 no.1
• /
• pp.668-674
• /
• 2020

Quality Assurance (QA) is essential to provide effective hyperthermia, but in the case of a problem with a hyperthermia cancer therapy system in Korea, the manufacturers or venders are repairing and maintaining the system. In Korea, if an error occurs in the hyperthermia system, the manufacturer and sales agent are repairing and maintaining it. There is no QA protocol suitable for the domestic situation. This study is based on the QA guidelines recommended by institutions such as European Society for Hyperthermia Oncology (ESHO), Hellenic Society of Oncologic Hyperthermia (HSOH), and the results of questionnaires to hospitals that have hyperthermia cancer therapy systems in Korea. By developing an optimized QA protocol, we aim to reduce the errors and inaccuracies that can occur in during hyperthermia such as measurement of temperature, instrumentation, and heat transfer. In addition, we will visit a hospital with a hyperthermia cancer therapy system in Korea to perform a QA based on this study, and study to specify tolerances and accurate QA set-up parameters using the measured QA results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.3-15
• /
• 2000

As an OLT in the central office controls up to 64 ONUs in the subscriber area via a passive optical splitter, the hU PON system can accomodate PTTx in a single platform with low cost. To operate the system, it is important to implement an efficient MAC protocol, however, the protocol is currently the further study area in the ITU-T 0.983.1. In this paper, we suggest the MAC protocol which is needed to send cells of ONU to upstream, and based on the ITU-T G.983.1. We survey conventional MAC protocols which are not based on G.983.1, and then formulate the minislot period and length for the grant request and determine the optimal value of each parameter. Also, we suggest a coding scheme for the grant field of the PLOAM cell and the procedure allocating optimal parameters to the ONU.