• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.752-760
• /
• 2010

This paper investigates the performance of EPCglobal Generation-2(Gen-2) radio frequency identification(RFID) protocol under reader-to-reader interfering environments. We establish a modified discrete-time Markov chain(DTMC) model for the Gen-2 and accordingly obtain quantitative results of query success rate(QSR) and tag identification speed (TIS). Extensive simulations validate our theoretical analysis and demonstrate that the number of tags over 100 has little impact on the performance. TIS linearly decreases by 10 tags/sec/reader as the number of interfering readers increases. Our model for Gen-2 protocol is also useful to study the performance of other RFID protocols.

• Korean Journal of Acupuncture
• /
• v.36 no.1
• /
• pp.44-51
• /
• 2019

Objectives : Teaching the standardized acupuncture point locations and improving the accuracy of acupoint locations through objective evaluation is a very important part of Korean medicine education. The aim of this study is to develop a dummy system for evaluation and support of teaching acupoint location in meridian and acupoints classes and to introduce the developed system. Methods : We established a protocol for the development of the system. The protocol included definition of usage purpose, definition of its essential performance, and set of scope. The system compares the amount of light at the target acupoint with the amount of light at the other sites to determine whether the target acupoint is properly specificated. Results : A prototype of the system was built according to the protocol and consists of light emitter, dummy, control/operation, input part and output part. The light emitter projects laser beam passing through the skin of the dummy. Light sensors were attached inside the acupoints of the dummy. Three types of light sensors were selected depending on the location of the acupoints. The arithmetic, input, and output parts were constructed using Arduino and Raspberry pi boards. The developed system was applied in class. Conclusions : It is thought that the dummy system for evaluation and support of teaching acupoint location can be used as a training model in order to help teach standardized acupoint locations and objective evaluation.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.12
• /
• pp.455-462
• /
• 2016

Wireless sensor networks have been researched to gather data about events on sensor fields from sources at sinks. Multipath routing is one of attractive approaches to reliably send data against the problem of frequent breakages on paths from sources to sinks due to node and link failures. As mobile events such as humans, animals, and vehicles are considered, sources may be continuously generated according to the movement of the mobile event. Thus, mobile events provide new challenging issue in multipath routing. However, the research on multipath routing mainly focus on both efficient multipath construction from sources to static sinks and fast multipath reconstruction against path breakages. Accordingly, the previous multipath routing protocols request each source continuously generated by a mobile event to construct individual multipath from the source to sinks. This induces the increase of multipath construction cost in the previous protocols in proportion to the number of source. Therefore, we propose efficient multipath routing protocol for supporting continuous sources generated by mobile events. In the proposed protocol, new source efficiently reconstructs its multipath by exploiting the existing multipath of previous sources. To do this, the proposed protocol selects one among three reconstruction methods: a local reconstruction, a global partial one, and a global full one. For a selection decision, we provide an analytical energy consumption cost model that calculates the summation of both the multipath reconstruction cost and the data forwarding cost. Simulation results show that the proposed protocol has better performance than the previous protocol to provide multipath routing for mobile events.

• Proceedings of the CALSEC Conference
• /
• 2003.09a
• /
• pp.45-53
• /
• 2003

This paper addresses the issues related to the development of product model and applications fer nuclear power plants based on STEP and PLIB standards. The ISO standards which can be applied are; STEP(Standard for the Exchange of Product Model Data) AP(application protocol) 221/231, AP 230/225, AP 227, ISO 13584 PLIB, ISO 15926 RDL. The data models of the AP's and ISO 15926 RDL are reviewed and an application system is proposed to exchange and share the design data of the nuclear power plant.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.105-108
• /
• 2002

This paper analytical models of a centralized approach based on SNMP Protocol, distributed approach based on mobile agent, and mixed model which is tile existing mobile agent model in order to overcome large communication numbers of SNMP and accumulated data of mobile agent. And then, we compare and analyze these analytical models. Performance evaluation results show that performance of mobile agent and the mixed model is less sensitive to the network traffic and more profitable for complex network environment than that of SNMP.

• Structural Engineering and Mechanics
• /
• v.49 no.2
• /
• pp.237-259
• /
• 2014

Wind-induced failure around screwed connections has been documented in roof and wall cladding systems made with steel sheet cold-formed panels during high wind events. Previous research has found that low cycle fatigue caused by stress concentration and fluctuating wind loads is responsible for most such failures. A dynamic load protocol was employed in this work to represent fatigue under wind effects. A finite element model and fatigue criteria were implemented and compared with laboratory experiments in order to predict the fatigue failure associated with fluctuating wind loads. Results are used to develop an analytical model which can be employed for the fatigue analysis of steel cold-formed cladding systems. Existing three dimensional fatigue criteria are implemented and correlated with fatigue damage observed on steel claddings. Parametric studies are used to formulate suitable yet simple fatigue criteria. Fatigue failure is predicted in different configurations of loads, types of connections, and thicknesses of steel folded plate cladding. The analytical model, which correlated with experimental results reported in a companion paper, was validated for the fatigue life prediction and failure mechanism of different connection types and thicknesses of cold-formed steel cladding.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.514-537
• /
• 2020

Wireless sensor network (WSN) is a distributed network composed of many sensory nodes. It is precisely due to the clustering unevenness and cluster head election randomness that the energy consumption of WSN is excessive. Therefore, a many-objective optimization WSN energy balance model is proposed for the first time in the clustering stage of LEACH protocol. The four objective is considered that the cluster distance, the sink node distance, the overall energy consumption of the network and the network energy consumption balance to select the cluster head, which to better balance the energy consumption of the WSN network and extend the network lifetime. A many-objective optimization algorithm to optimize the model (LEACH-ABF) is designed, which combines adaptive balanced function strategy with penalty-based boundary selection intersection strategy to optimize the clustering method of LEACH. The experimental results show that LEACH-ABF can balance network energy consumption effectively and extend the network lifetime when compared with other algorithms.

• Steel and Composite Structures
• /
• v.23 no.5
• /
• pp.501-516
• /
• 2017

Numerical simulations are prevalently used to evaluate the seismic behaviour of structures. The accuracy of the simulation results depends directly on the accuracy of the modelling techniques employed to simulate the behaviour of individual structural members. An empirical modelling technique is employed in this paper to simulate the behaviour of column members under cyclic and seismic loading. Despite the common modelling techniques, this technique is capable of simulating two important aspects of the cyclic and seismic behaviour of columns simultaneously. The proposed fiber-based modelling technique captures explicitly the interaction between the bending moment and the axial force in columns, and the cyclic deterioration of the hysteretic behaviour of these members is implicitly taken into account. The fiber-based model is calibrated based on the cyclic behaviour of square hollow steel sections. The behaviour of several column archetypes is investigated under a dual cyclic loading protocol to develop a benchmark database before the calibration procedure. The dual loading protocol used in this study consists of both axial and lateral loading cycles with varying amplitudes. After the calibration procedure, a regression analysis is conducted to derive an equation for predicting a varying calibrated modelling parameter. Finally, several nonlinear time-history analyses are conducted on a 6-story steel special moment frame in order to investigate how the results of numerical simulations can be affected by employing the intended modelling technique for columns instead of other common modelling techniques.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.165-173
• /
• 2008

Hybrid ad hoc networks are integrated networks referred to Home Networks, Telematics and Sensor networks can offer various services. Specially, in ad hoc network where each node is responsible for forwarding neighbor nodes' data packets, it should net only reduce the overall energy consumption but also balance individual battery power. Unbalanced energy usage will result in earlier node failure in overloaded nodes. it leads to network partitioning and reduces network lifetime. Therefore, this paper studied the routing protocol considering efficiency of energy. The suggested algorithm can predict the status of energy in each node using the energy prediction model. This can reduce the overload of establishing route path and balance individual battery power. The suggested algorithm can reduce power consumption as well as increase network lifetime.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.675-687
• /
• 2017

In the aerospace industry, we have produced various models according to operational conditions and the environment after development of the base model is completed. Therefore, when design change is necessary, there are modification and updating costs of the circuit whenever environment variables change. For these reasons, recently, in various fields, system designs that can flexibly respond to changing environmental conditions using field programmable gate arrays (FPGAs) are attracting attention, and the rapidly changing aerospace industry also uses FPGAs to organize the system environment. In this paper, we design the controller area network (CAN) intellectual property (IP) protocol used instead of the avionics protocol that includes ARINC-429 and MIL-STD-1553, which are not suitable for small unmanned aerial vehicle (UAV) systems at the register transistor logic (RTL) level, which does not depend on the FPGA vender, and we verify the performance. Consequentially, a Spartan 6 FPGA model-based system on chip (SoC) including an embedded system is constructed by using the designed CAN communications IP and Xilinx Microblaze, and the configured SoC only recorded an average 32% logic element usage rate in the Spartan 6 FPGA model.