• 한국멀티미디어학회논문지
• /
• 제17권7호
• /
• pp.778-786
• /
• 2014

Buyer-seller watermarking protocol is one of the copyright protection techniques which combine a cryptographic protocol used in electronic commerce with a digital wetermarking scheme aiming at proving the ownership of multimedia contents and preventing the illegal reproduction and redistribution of digital contents. In this paper, it is proposed a new watermarking scheme in an encrypted domain in an image that is based on the block-DCT framework. In order to implement watermarking scheme in a public-key cryptosystem, it is divided that frequency coefficients exist as real number into integer and decimal layer. And the decimal layer is modified integer type through integral-processing. Also, for robustness and invisibility required in watermarking scheme, it is designed a direction-adaptive watermarking scheme based on locally edge-properties of each block in an image through analyzing distribution property of the frequency coefficients in a block using JND threshold.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.23-23
• /
• 2010

The $Bi_2Mg_{2/3}Nb_{4/3}O_7$ (BMNO)-Bi composite films sandwiched by an $Al_2O_3$ protection layer exhibited a linear increase of a dielectric constant with increasing thickness and the 1000nm-thick BMNO-Bi composite films showed a dielectric constant (~220) higher than that of its bulk material (~210), keeping a low leakage current density of about $0.1{\mu}A/cm^2$. An enhancement of the dielectric constant in the BMNO-Bi composite films was attributed to the hybrid model combined by a space charge polarization, dipolar response, and nano-capacitors. On the other hand, 1000nm-thick BMNO-Bi composite films sandwiched by 40nm-thick BMNO layer exhibited a dielectric constant of about 450 at 100 kHz and a leakage current density of $0.1{\mu}A/cm^2$ at 6V.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권12호
• /
• pp.5150-5169
• /
• 2015

Mobile Ad hoc NETworks (MANETs) are the best choice when mobility, scalability, and decentralized network infrastructure are needed. Because of critical mission applications of MANETs, network security is the vital requirement. Most routing protocols in MANETs assume that every node in the network is trustworthy. However, due to the open medium, the wide distribution, and the lack of nodes' physical protection, attackers can easily compromise MANETs by inserting misbehaving nodes into the network that make blackhole attacks. Previous research to detect the misbehaving nodes in MANETs used the overhearing methods, or additional ACKnowledgement (ACK) packets to confirm the reception of data packets. In this paper a special lightweight acknowledgement-based method is developed that, contrary to existing methods, it uses ACK packets of MAC layer instead of adding new ACK packets to the network layer for confirmations. In fact, this novel method, named PIGACK, uses ACK packets of MAC 802.11 to piggyback confirmations from a receiver to a sender in the same transmission duration that the sender sends a data packet to the receiver. Analytical and simulation results show that the proposed method considerably decreases the network overhead and increases the packet delivery ratio compared to the well-known method (2ACK).

• 한국의류산업학회지
• /
• 제4권6호
• /
• pp.564-566
• /
• 2002

Protective clothing for firefighters typically consists of a flame resistant outer shell and inner layers. The inner layers are generally composed of a moisture barrier and a thermal barrier. On performing the task in fire place the heat and perspiration generated from the body become trapped inside the protective clothing. Those heat and moisture result into heat-stress and physical fatigue of fire fighter, which hinder the work. Therefore, the system of clothing designs and material layers must be chosen carefully to balance protection and comfort. 3 kinds of protective clothing of 3 layer structure were used in the experiment of physiological comfort. From the comparison of wear trials with the 3 kinds of layers in firefighters clothing, it indicates that the moisture dissipation of A+B2+C was highest, following A+BI+C andA+B3+C. And the heat dissipation of A+BI+C and A+B2+C were better than A+B3+C. In the protective clothing with A+B3+C, heat and perspiration generated through exercise remained in clothing system long and caused discomfort.

• Tribology and Lubricants
• /
• 제25권4호
• /
• pp.225-230
• /
• 2009

Seals are very useful machine components in protection of leakage of lubricant or working fluid, and incoming of debris from outside. Various elastomer are widely used as sealing materials and the shaft surfaces are generally coated with high hardness material after heat treatment. It is generally known that the foreign debris and wear particles get stuck into sealing surface, the steel shaft surface can be damaged and worn by mainly abrasive wear. In this paper, using MARC, contact analysis are conducted to show the hard coated steel shaft surface can be fatigue failed by very small elastic particle intervened between seal and steel surface. Variations of contact and von-Mises stress distributions and contact half-widths with interference and coating thickness are presented. The maximum von-Mises stress occurs always in the coating layer or between coated layer/substrate interface. Therefore the coated sealing surface can be fatigued and then failed by very small particles. The results can be used in design of sealing surface and further studies are required.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.98-98
• /
• 2013

완전화 박막이란 사용자가 원하는 용도에 맞게 최적의 성능을 구현하도록 제조된 박막을 의미하며 금속이나 화합물 박막을 제조하되 각종 구조 제어 Tool이나 증착 공정을 변화시켜 나노화와 다층화 또는 치밀화를 통해 구현될 수 있다. 최근 고성능의 증착 및 제어 Tool이 개발되고 빗각증착(Oblique Angle Deposition)이나 스침각 증착(Glancing Angle Deposition) 방법 등의 기술이 개발되면서 사용자 목적에 최적인 박막 소재를 제공하여 User-friendly한 응용을 위한 연구개발이 활발히 진행되고 있다. 완전화 박막 제조에 대한 시도는 1990년대에 일본에서 시작되었다. 일본에서는 산학연이 공동으로 참여하는 NEDO 프로그램을 통해 경질코팅을 이용한 Protective Layer를 제조하여 차단 방식에 의한 내식성 구현 연구를 수행하였다. 유럽에서는 제 7차 European Framework Program (7th FT)을 통해 2007년부터 CORRAL (Corrosion Protection with Perfect Atomic Layer) 프로젝트를 만들어 완전화 박막 연구를 진행하고 있다. 상기 프로젝트는 얇은 자연 산화막이 Bulk의 부식을 방지해주는 것에 착안하여 HIPIMS나 Filtered Arc 또는 ALD 공정을 이용하여 자연 산화막과 유사한 Defect-free 산화막을 제조하여 Barrier형 내식성 박막을 구현하는 것을 목표로 하고 있다. 본 연구에서는 완전화 박막 구현을 위한 연구동향을 파악하고 완전화 박막 제조를 위한 기술적 과제와 몇 가지의 시도에 대한 기초 연구 자료를 소개한다.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.85-90
• /
• 2012

In this study, temperature profile of the fly ash concrete were studied in accordance with the change of heating curing method combination for the slab concrete in order to develop efficient protection method of the concrete subjected to $-20^{\circ}C$. The slab concretes with the size of $1200mm{\times}600mm{\times}200mm$ were fabricated with W/B of 50% and exposed to $-20^{\circ}C$ for 7 days. Five different combinations of heat curing methods were applied to the slab concrete specimen; two combinations of heat supplying by electrical heater and surface heat insulation material such as polyethylene film and quadrupled layer bubble sheet based on heat enclosure installment; three combinations of heating coil embedment and surface heat insulation materials such as polyethylene film, sawdust and quadrupled layer bubble sheet based on heat enclosure installment. Test results showed that by applying both heating coil and bubble sheet and heat enclosure, the concrete exposed to $-20^{\circ}C$ can be effectively protected from early-age frost damage.

• 한국전자파학회논문지
• /
• 제24권1호
• /
• pp.73-81
• /
• 2013

본 논문에서는 PHY 계층에서의 간섭 전력을 수학적으로 모델링하고, 이를 MAC 계층의 DTMC(Discrete Time Markov Chain) 모델과 결합한 주파수 공동사용 분석 방법을 제안하였다. 그리고 제안한 방법을 국내 RFID/USN 대역에서 수동형 RFID와 USN 간의 주파수 공동사용을 위한 이격 거리 분석에 적용하였다. 국내 RFID/USN에서 채널 20 미만일 경우에는 4 W의 고출력 RFID가 사용하므로 USN과 주파수를 공동사용하기 어려우나, 채널 20 이상은 출력 200 mW로 최소 보호 영역 반경 300 m가 확보되면 RFID 리더 간섭에 따른 USN의 성능 감소가 1% 미만으로 공동사용이 가능함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.262-263
• /
• 2005

For mechanical and electrical stability and environment protection, Cu and stainless steel stabilizer is laminated to Ag layer to produce a composite neutral-axis(N-A) architecture in which the YBCO layer is centered between the oxide buffered metallic substrate and stabilizer strip lamination. this architecture allows the wire to meet operational requirements including stresses at cryogenic temperature, winding tensions, mechanical bending requirements thermal and electrical stability under fault conditions. we have experimentally studied mechanical properties of laminated stainless steel stabilizer on YBCO coated conductors. we have laminated YBCO coated conductors by continuous dipping soldering process. we have investigated lamination interface between solder and stabilizer, YBCO coated conductor. we evaluated bonding properties tensile / shear bonding strength, peeling strength laminated YBCO coated conductors.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.36-42
• /
• 2009

In the present day, new performances are demanded for automobile body steel sheet for example, light weight, durability, resistance corrosion and environmental protection. For an improvement of resistance corrosion, European automobile companies developed pre-sealed steel in 1990's. Pre-sealed steel have organic coated layer upper zinc coated layer. Evaluating a resistance spot weldability of pre-sealed steel plate is important because resistance spot welding is used mainly in automobile body joining process. In this study, evaluating a weldability of pre-sealed steel plate was carried out using lobe diagram, dynamic resistance and high-speed image. Usually, Pre-sealed steel has poor weldability than GA steel's. To improve a weldability of pre-sealed steel sheet, pre-current was applied to welding process. Pre-current is applied prior to base-current. In conclusion, the weldability of pre-sealed steel has been improved than GA steel's by applying pre-current.