• 펄프종이기술
• /
• 제34권1호
• /
• pp.37-45
• /
• 2002

The effect of soft nip calendering variables including pressure, temperature, nip residence time and sheet moisture on the properties of coated papers was investigated. The change of gloss, opacity, bulk and brightness were determined after calendering. Increase of calendering pressure and temperature increased gloss, but it decreased opacity, bulk and brightness of coated papers. Nip residence time and sheet moisture content showed similar effects on these properties. Calendering conditions of 16$0^{\circ}C$ of temperature, 146kg$_{f}$/cm of line load or less were found to provide optimum conditions to obtain reasonable gloss and smoothness while minimizing the loss of bulk and opacity for coated papers.

• 한국염색가공학회지
• /
• 제8권2호
• /
• pp.43-48
• /
• 1996

Condensation type aromatic polyimides were synthesized in DMF solvent by two step low temperature solution polymerization. By employing monomers as p-phenylene 3diamine and 3 kinds of dianhydrides such as pyromellitic dianhydride, 3,3',4,4'-benzophenone tetracarboxylic dianhydride and trimellitic anhydride chloride, poly(amic acid) precursors were sythesized. These reactions were exothermic and very fast. When synthesized poly(amic acid)s were dissolved in DMF solvent and stood long time, the polymers were hydrolyzed and their degradation reactions were accelerated as the solution concentrations were dilute. Also, when water is added there-to the degradation rates were accelerated 8faster. In addition, in a very dilute solution state, the reduction viscosity is greatly increased to show properties of conventional polyelectrolytes. This also showed properties sensitive to the concentration change as carboxyl groups per unit segment are increased.

• 펄프종이기술
• /
• 제30권4호
• /
• pp.49-58
• /
• 1998

The SPM could image the most detailed microstructure of a sample in a wet and dry state by measuring the interaction between the atoms on the sample surface and the extremely sharp probe tip. The refined fibre exhibited large wrinkles formed by fibrillar bundles, the disintegrated fibres extensively showed “scale-like features”. By using the Non-Contact Atomic Force Microscopy (NC-AFM) and Contact Atomic Force Microscopy (C-AFM) including Phase Detection Microscopy (PDM) and Force Modulation Microscopy (FMM), it was possible to investigate surface topography, surface roughness and mechanical property (hardness or visco-elasticity) of fibre surface in detail. The PDM and FMM images showed that the disintegrated only fibre displayed uniform mechanical properties, whereas the refined one did not. The surface roughness of pulp fibres was higher in refined fibres than in disintegrated fibres due to the presence of external fibrils. These SPM images would be used to provide visual evidence of morphological change of a single fibre created during mechanical treatments such as refining, drying, calendering and so on.

• Agricultural and Biosystems Engineering
• /
• 제1권1호
• /
• pp.38-42
• /
• 2000

Though the freshness for agricultural products is an important factor related to their quality management, this terminology is being used restrictedly because it is very subjective. In this study, a dimensionless index which had the span of the maximum of 1 through the minimum of 0 was proposed to describe freshness of the product with time-variant quality and was applied to Tsugaru and Fuji apples. First, the compressive properties having the linearity in their change regarding time elapsed after harvest were selected. For Tsugaru apple, bio-yield and rupture forces had high correlation with time while for Fuji, bio-yield and rupture deformations had high correlations. When the slope, or ratio of force to deformation, was considered, the effect of cultivar could be neglected. When the linearly time-variant compressive properties for Tsugaru and Fuji apples were involved in the freshness indices, they described well freshness of apples. Also, the freshness decay constant depicted a characteristic which related to freshness decay rate. Therefore, the freshness index can be utilized to manage the quality during storage and distribution of apples.

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.112-119
• /
• 2007

In order to predict vibration trends occurred during vehicle drive, acceleration data was processed by using data processing algorithm with moving average and Hilbert transform. Specific mode constants of acceleration were obtained under various disturbance. Vehicle velocity, road condition, property of pointing structure were considered as factors which make change of vibration trend in vehicle dynamics. Results of signal processing were compared and analysed. Advanced performance of the timing selection algorithm from this study was verified by using simple equipment comparing with the deflection measurement laser system(Muzzle Reference System).

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.85-90
• /
• 2003

Removal rate and Within Wafer Non-Uniformity (WIWNU), the most critical issues in Chemical Mechanical Polish (CMP) process, are related to the pressure distribution, wafer shape, slurry flow, mechanical property of pad and etc. Among them, wafer warp generated by other various manufacturing process of wafer may induce the deviation of pressure distribution on the backside of wafer. In the convex shaped wafer the pressure onto the backside of wafer is higher than that of perfectly flat shaped wafer. Besides, such an added pressure is in proportion to the curvature of wafer. That is, the bigger the curvature of wafer becomes the higher the removal rate goes. And the WIWNU is known to be directly related to the pressure distribution on the wafer as well. In other words, the deviation of pressure distribution is in proportion to the WIWNU. In this paper, it is found that the wafer shape may be modified through heating the backside of it and thus properly changed pressure onto the backside of it may improve the WIWNU.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.665-668
• /
• 2001

Generally, according to rising of atmospheric temperature, a consistency of concrete decreases, and a slump property of concrete is changed to be large. Also, in the strength development of concrete, the strength development rate of long-term age(28day) in comparison to strength of early age(7day) and the absolute compressive strength decreases. Accordingly, in this study, experiments about quality evaluation of concrete utilizing Ordinary Portland Cement is carried out. As a result of experiments, there were a conspicuous change in slump of concrete due to temperature increase. In conclusion, the rising of atmospheric temperature was very important factor in affecting the quality fluctuation of hot weather concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.26-29
• /
• 1995

Continued form part 1, this study is aimed for analyzing the property of hardened concrete According to the replacing change of fly ash and silica fume which has influence on the properties of high performance xoncrete. From the test results, the compressive and the drying shrinkage Strength are high when the replacing ratio of silica fume increases and the tensile strength appears high when the replacing of fly ash increases.

• 한국해양공학회지
• /
• 제8권1호
• /
• pp.154-164
• /
• 1994

In this paper, fatigue testing was carried out under the change of aging time(0.5,1.5.10hrs) by electric heating method which is one of the useful method in the application of Robot's actuator. Fatigue degradation behaviors such as cyclic deformation property, amount of deformation, decrease in recovery and variation of transformation temperature for each specimen were examined closely, and the effect of aging time condition was studied on their fatigue degradation behaviors.

• 한국정밀공학회지
• /
• 제25권9호
• /
• pp.103-108
• /
• 2008

In-plane shear tests were performed to investigate the shear property change of FRP by plasma modification. Graphite/epoxy prepreg was used as a test material and plasma source was a microwave (2.4GHz) type. Plasma was induced by oxygen gas and its flow rate was kept $4{\sim}5$sccm with low vacuum state of $10^{-3}$ Torr. Prepreg was stacked unidirectionally ($[0^0]_8$) after plasma modification. Wettability was determined by measuring a contact angle. The results showed that the contact angle was decreased from $86^0$ to $45^0$ after plasma modification. Shear strength was also improved by ${\sim}10%$. SEM examination was made on the fracture surface and functional group produced by the plasma modification was investigated by XPS.