• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.367-368
• /
• 2009

BSCCO HTS(High Temperature Superconductor) could be applied to superconducting cable, magnet and motor, using its hight critical properties. Especially, superconducting cable has a hight possibility of practical use due to the possibility of low voltage and high capacity transmission caused by its lower power loss than copper cable. In this paper, the transport characteristics of BSCCO superconducting cable, according to the change of BSCCO superconducting cable's accident point at phase $0^{\circ}$ and $45^{\circ}C$, were analyzed and compared each other. Consequently, when the accident was occur the resistance of the HTS was higher at the point phase $0^{\circ}$ than $45^{\circ}$ which means it will cause much higher load on the HTS.

• Journal of the Korea Furniture Society
• /
• v.20 no.4
• /
• pp.388-403
• /
• 2009

Nature is suiting to the objective of oneself, structurally safe and functional. It continues to transform itself into various forms and has aesthetic beauty. By analyzing how nature's organic property has been expressed in different cases of furniture design, which has objective purpose, this research presents designing pathway to induce nature's organic oder into the furniture design. Simile expression type clearly shows its form through exposing the natural material that it is made out of. Visually, esthetic beauty can be emphasized and mentally it can provide pleasantness. Metaphorical expression type only hints the original material that was used to reproduce. Under the same condition it can have subjective perception and it needs to be used suitably at the right place and time. Abstract expression type it might be hard to recognize the original material visually since it went through many transformation in expression, however it can stage extreme and mysterious atmosphere. Furniture designs employing these three types can have functionality as well as decorative and serve variety of change in the existing uniformed interior space, and it can also satisfy individual's need with practicality and provide aesthetic beauty.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.362-372
• /
• 2010

This paper surveys the physical properties of the multiwall carbon nanotube (MWNT) and polyurethane composite film for improvement of mechanical properties and electrical characteristics. The modification of MWNT was carried out by acid treatment with nitric and sulphuric acid mixed solution, and then followed by thermal treatment for enhancing MWNT dispersion with polyurethane. This modified MWNT was mixed with polyurethane by changing the loading content of MWNT and dispersion time under the dimethylformamide solution in the ultrasonic wave apparatus. Various physical characteristics of the modified PU/MWNT films were measured and analyzed in terms of the loading content and dispersion time. The maximum absorbance of the PU/MWNT films were observed with the 2wt% loading at dispersion times of 2 and 24 hour, respectively. The minimum electrical volume resistivity of PU/MWNT film was shown at the loading content of 0.5wt% or more irrespective of dispersion treating time. However the optimum condition was assumed to 2wt% loading at dispersion time of 2 hours by assessing the surface profile of the film using video microscope. The breaking stress and strain of the PU/MWNT film decreased with increasing loading content, but no change of physical properties was shown with increasing in dispersion time.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.2 s.30
• /
• pp.128-136
• /
• 1989

In order to investigate a practical application of fibrous adsorbents to heavy metal ions, amidoxime fibers, as a particular class of solid chelate agents, were prepared by hydroxylamine treatment for acrylic fibers in a recipe of neutralization. Among the important problems from plant effluents are toxic concentrations of heavy metals such as copper. Accordingly, the properties of Cu (II) adsorption and its chelates were studied. The results obtained are as follows; The fibrous adsorbents have the property of increasing the swelling volumes by amidoximation. The adsorption of Cu (II) ion is characterized by an endothermic reaction, which is estimated as the plus values in the enthalpy change ($\delta$H=1.30 Kcal/mol. and 3.14 Kcal/mol.). The Cu (II) ions are adsorbed in the range of pH $3\~8$ and the maximum adsorptions are occurred about pH 8. Owing to the anions $(NO_3^-,\;Cl^-)$ of copper salts, amidoxime fibers form 1:1 and 2:1 (ligand: metal) chelating complexes with Cu (II). The nitrate anion chelates to amide I (NH) of amidoxime groups and the chlorine anion does to nitrosyl (NO). These effects relate to the crystallization of the complex and the thermal property.

• Korean Journal of Organic Agriculture
• /
• v.9 no.1
• /
• pp.75-89
• /
• 2001

This study the effects of the application of organic farming materials on the soil Physicochemistry property and plant growth, yield and components of Tomato were compared with conventional culture. The results obtained from the experiment are summarized as follows : 1. The effect of soil chemical properties after application organic farming materials, The amounts of pH and O.M. in N, P, K treated plot were few of change, To the contrary, fermentation compost and microorganisms fermentation compost treated plot were some increase, Amount of $P_2$$O_{5}$, Ca and K increase in comparison with the N, P, K treated plot. 2. Changes of soil microbial after application organic farming materials, The number of bacteria, actinomycetes and fungi in N, P, K treated plot were appeared definite direction. to the contrary, The number of bacteria and actimycetes in fermentation compost and microorganisms fermentation compost treated plot showed the increased tendency, The number of fungi showed the decreased tendency. 3. Effect of organic farming materials application on the growth and yield of tomato was superior in order of microorganisms fermentation compost plot〉 chemical fertilizers plot〉 fermentation compost plot. especially, chicken manure ＋ microorganisms fermentation compost treated plot was the highest. 4. Effect of organic farming materials application on the components of tomato were not different.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.2
• /
• pp.144-152
• /
• 2011

Most of the models for the vehicle routing problems studied in the literature assumed constant travel times. However, those approaches may give infeasible solutions when traffic congestion causes delays in travel time. To overcome such difficulty, there have been some researches considering the change of the travel time which is called the time dependent vehicle routing problem (TDVRP). TDVRP assumes that the travel time between two locations is not only affected by the distance traveled, but by many other factors including the time of the day. In this paper, we propose a branch-and-price algorithm to solve the TDVRP. The time dependent property of the travel time is dealt with an enumeration scheme with bounding procedures in the column generation procedure identifying a profitable route. The proposed algorithm guarantees the "Non-passing" property to be held in the solutions. The algorithm was tested on problems composed of the Solomon's benchmark instances for 25 and 50 nodes. Computational results are reported.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.481-489
• /
• 2006

Two dimensional diffusion model test was conducted to investigate the sedimentation properties and consolidation process of reclaimed ground using dredging coarse soil which is composed of passing amount 20 percentage and 45 percentage of #200 sieve size respectively. The passing amount of #200 sieve size affected on sedimentation properties. The coarse soil which is passing amount of 20 percent showed that the sedimentation structure was layered type and passing amount of 45 percentage was wall-partition type according diffusion distance. Furthermore, the water content of surface and section, and distribution of fine soil were changed according to diffusion distance. and the change amount of pore water pressure and strength property when soil is diffused, segregated and accumulated can be applied efficiently in design of dredging and reclamation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.210-215
• /
• 2002

MR(Magnetorheogical) fluid composed of fine iron powders dispersed in silicon oil is utilized to many smart structures and devices because of its significant rheological property change by the application of an external magnetic field. When we deal with the shock wave attenuation of warship structures, we should be able to characterize the high frequency behavior of MR fluids. So far, however, many efforts have been focused on the material characterization of MR fluids at low frequencies below 100Hz. In this paper, the MR fluid property characterization at high frequency region is performed. An experimental setup based on wave transmission technique is made and the storage modulus as well as the loss modulus of MR fluids are found from the measured data of speed sound and attenuation. Details of the experiment are addressed and the obtained storage and loss moduli are addressed at $50kHz{\sim}100kHz$.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.2
• /
• pp.75-87
• /
• 2003

Printing inks are mainly composed of pigment and vehicles. Among these components, the Vehicle affect the rheologic property of the ink the most but pigment content of characteristic also after to the fluidity property not less than the vehicle. In the study, It is tested effect to the ink fluidity and structure recovery according to change the pigment particle size. The ink fluidity have been observed by using rheometer at the various conditions and it has been tested to observe what the ink fluidity has different means. In result We have found that the viscosity value of the low shear rate range has relatively higher value with decreasing the pigment particle size in the ink. Also, it has been found that when the pigment particle size decreases, the yield stress gradually increase. In the case of ink's structure recovery, when the pigment particle size decreases in the ink, the less changing shear rate, and it takes less time to recover.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.420-427
• /
• 2008

To study the suitability of chestnut as a cask for ripening traditional liquors, the absorption property for pure water, liquor with 30% alcohol content and ethanol with 95% alcohol content were investigated for five species. Oriental oak had the greatest amount of liquid absorption while chestnut had the smallest amount. The absorption amount linearly increased with increasing soaking time. The absorption amounts for each section were greatest in RT plane, and the difference between LR plane and LT plane was very small for all soaking conditions. The anisotropy of absorption amount for five species was greatest in Japanese cedar and was smallest in white mulberry on the whole. And the change of absorption amounts according to soaking conditions tended to decrease in softwoods and increase in hardwoods, and the difference among wood species was not clear. From this result, it was found that chestnut with a small absorption amount, regarding of soaking behavior, was a good material as a cask for ripening traditional liquors, whereas small diameter oriental oak with a great absorption amount was not suitable in this purpose.