• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.118-119
• /
• 2005

PRAM (Phase Change Random Access Memory) is well known to use reversible phase transition between amorphous (high resistance) and crystalline (low resistance) states of chalcogenide thin film by electrical Joule heating. In this paper, we introduce a stack-type PRAM device with a novel GST/TiAlN structures (GST and a heating layer of TiAlN), and report its electrical switching properties. XRD analysis result of GST thin film indicates that the crystallization of the GST film start at about $200^{\circ}C$. Electrical property results such as I-V & R-V show that the phase change switching operation between set and reset states is observed, as various input electrical sources are applied.

• 한국의류학회지
• /
• 제10권1호
• /
• pp.47-57
• /
• 1986

The purpose of this study is to investigate fatigue phenomema of woven fabric. In order to obtain the basic data which is available for predicting the fabric fatigue phenomena, the change of mechanical properties of woven fabrics caused by the wearing and the changes of mechanical properties of woven fabrics which were subjected to repeated tensile-shearing deformation using fabric testing machine has been investigated and compared. The fatigue of woven fabrics was examined with the value of basic mechanical properties of specimens measured by the KES-F fabric testing system and their hand value and wearing ability. The results were as follows. 1) The fatigue phenomena of woven fabrics by the wearing for 800 hours are different on the position of the body: On the portion of hip, the change of surface property was the greatest, bending hysterisis was greatly increased, thickness weight, stiffness, fullness shearing hysterisis were more increased than original fabric and T.H.V. was decreased. On the portion of knee, decreasing of tensile resilience and increasing of bending, shearing hysterisis were observed greater than any other part, and increasing of stiffness, crispness was more than original fabric. On the bottom area, the changes of mechanical property was comparatively small, H.V. and T.H.V. showed near the value of the original fabric. 2) By drycleaning most of mechanical properties showed the tendency to recover the value of the original fabric, but bending hysterisis and thickess were increased, tensile and com-pression resilience were decreased more than original fabric in all parts. 3) The fatigue phenomena caused by fabric fatigue testing machine were as follows. The decreasing of hystersis in the repeated deformation such as bending, shearing was appeared at the $10^2$ deformation, but with the increasing cycle, the tendency was slightly regained. Handle value was also appeared the lowest value at the $10^2$ deformation.

• 농업과학연구
• /
• 제38권1호
• /
• pp.121-128
• /
• 2011

I/An electro-hydraulic transmission having advantages of convenience, safety, simple linking and high power, and an electronic control system were designed and fabricated. In this study, characteristics of the control system were investigated through outdoor tests for evaluation of installation of the system on a combine. Major findings were as followings. 1. Experiment for performance evaluation of the control system was conducted on concrete road. With steering lever in neutral position, driving HST swash plate and left/right wheel speed increased in proportion to driving lever angle. In case of steering control, steering swash plate angle changed in proportion to steering lever angle. This should cause increase in outer wheel speed, but it was observed that HST swash plate was controlled toward neutral to maintain the speed before steering. As a result, speed before steering was maintained despite the change in outer wheel speed by steering HST swash plate angle change. 2. It was observed that the HST system enabled steering with outer wheel maintained at constant speeds while inner wheel speed decreased, which was more stable than conventional mechanical links. In addition, for the selected 5 criteria, experiment showed satisfactory results and it was judged that installation on real vehicle would be feasible. 3. The control system showed response property of appropriate forward/reverse movement and lift/right steering, without causing any problems during experiment on concrete. Result of response property experiment on field operation also showed appropriate control over forward/reverse movement and left/right steering.

• 공업화학
• /
• 제8권5호
• /
• pp.837-843
• /
• 1997

산화형 폴리에틸렌 왁스 제조에 있어서 주요 반응인자인 사용 왁스의 물성, 산화시간, 산화온도, 공기의 주입량 등에 따른 산가의 변화와 산화에 따른 폴리머의 물성을 분석하였다. 실험결과 주어진 반응조건 하에서 산화온도에 대한 산가의 변화는 $160^{\circ}C$까지는 증가하였지만 $170^{\circ}C$에서는 오히려 산가가 감소하는 경향을 보였고, 공기 주입량에 비례하여 산가는 증가하였다. 또한 사용한 왁스의 분자량이 낮을수록 산가가 높았다. 분자량과 밀도차가 공존하는 시료의 산화반응에서는 가지의 길이, 수 등에 의한 밀도보다는 분자량에 의한 영향이 큰 것으로 생각되었다. 산화가 진행됨에 따라 분자량은 감소하고 분자량 분포는 넓어짐을 알 수 있었다. 온화한 조건 하에서 고산가를 얻기 위하여 자유라디칼 개시제를 촉매로 사용하였는데 같은 조건 하에서 무촉매인 경우에 비하여 고산가의 산화형 왁스를 얻을 수 있었다. 또한 DCPO(dicumylperoxide), HOPO(t-butyl peroxy 2-ethyl heaxanoate), BPO(butylperoxide) 순의로 반감기가 긴 촉매가 효율적이었다.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.328-332
• /
• 2014

Thin film transistors (TFTs) with an amorphous silicon zinc tin oxide (a-2SZTO) channel layer have been fabricated using an RF magnetron sputtering system. The effect of the change of excitation electron on the variation of the total interfacial trap states of a-2SZTO systems was investigated depending on sputtering power, since the interfacial state could be changed by changing sputtering power. It is well known that Si can effectively reduce the generation of the oxygen vacancies. However, The a-2SZTO systems of ZTO doped with 2 wt% Si could be degraded because the Si peripheral electron belonging to a p-orbital affects the amorphous zinc tin oxide (a-ZTO) TFTs of the s-orbital overlap structure. We fabricated amorphous 2 wt% Si-doped ZnSnO (a-2SZTO) TFTs using an RF magnetron sputtering system. The a-2SZTO TFTs show an improvement of the electrical property with increasing power. The a-2SZTO TFTs fabricated at a power of 30 W showed many of the total interfacial trap states. The a-2SZTO TFTs at a power of 30 W showed poor electrical property. However, at 50 W power, the total interfacial trap states showed improvement. In addition, the improved total interfacial states affected the thermal stress of a-2SZTO TFTs. Therefore, a-2SZTO TFTs fabricated at 50 W power showed a relatively small shift of threshold voltage. Similarly, the activation energy of a-2SZTO TFTs fabricated at 50 W power exhibits a relatively large falling rate (0.0475 eV/V) with a relatively high activation energy, which means that the a-2SZTO TFTs fabricated at 50 W power has a relatively lower trap density than other power cases. As a result, the electrical characteristics of a-2SZTO TFTs fabricated at a sputtering power of 50 W are enhanced. The TFTs fabricated by rf sputter should be carefully optimized to provide better stability for a-2SZTO in terms of the sputtering power, which is closely related to the interfacial trap states.

• 무역상무연구
• /
• 제16권
• /
• pp.83-114
• /
• 2001

This paper is focussed on the main features and problems of SGA amendment. main features and problems are as below. First, SGA section 14 uses a new term, that of "satisfactory quality", which is defined in a somewhat circular way and introduces some guidelines in order to solve other problems perceived as arising under the "merchantable quality". The change was largely to assist in the better resolution of consumer disputes and not necessary for commercial disputes because the change involves the substitution of a phrase which meant something but was inappropriate to commercial disputes. As with the definition of "merchantable quality", a court can take the new formulation as an invitation to start afresh; or it can refer to the previous case law. Second, before the SGA amendment, a contract for the sale of undifferentiated part of a bulk shipped or to be shipped on a named ship was a contract for the sale of unascertained goods. So the effect was that property could not pass to the buyer, even though he had paid the price in full, before the goods become ascertained. The main object of the SGA amendment was to improve the buyer's position where he had paid for a specified quantity of goods forming an undifferentiated part of an identified bulk and the seller then became insolvent before the goods for which the buyer had paid were ascertained. The improvement was achieved by making section 16 of the SGA 1979 subject to a new section 20A and includig section 20B, under which a buyer of a specified quantity bulk can acquire a proprietary interest in the bulk. This proprietary solution still has some problems in international sale of goods. Therefore, it would be more appropriated SGA should settle disputes between parties through payment, passing of risk, delivery of goods and/or documents etc. instead of property rights like UCC.

• 대한화장품학회지
• /
• 제38권2호
• /
• pp.119-131
• /
• 2012

w/o 에멀젼은 내수성이 뛰어나고 보습 효과를 오랫동안 지속시킬 수 있으므로 화장품에 많이 사용하지만 안정도가 좋지 않기 때문에 안정한 w/o 에멀젼을 만들기 위해서는 전해질의 농도, 오일의 극성 정도, 수상의 비율, 유화제의 농도 등을 조절하는 것이 매우 중요하다. 안정도에 영향을 주는 여러 가지 요소 중에서 유화제의 구조에 따라 유화가능여부와 안정도가 어떻게 달라지는지에 초점을 맞추고, 유화제를 구조적으로 polyglyceryl ester 계열, silicone 계열, sugar 계열 유화제 등으로 나누어서 실험을 진행하였다. 또한 유상에 사용되는 오일의 실리콘 함량을 다르게 하여 유화제의 유화 능력을 검토하였다. 실험 결과를 참고하여 유화제에 따른 에멀젼의 입자, 점도의 경시 변화 등의 w/o 에멀젼의 특성을 찾아내고, 여러 조건에서 에멀젼의 안정도를 관찰하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.314-315
• /
• 2008

We have studied a property change of organic light-emitting diodes (OLED)s due to a surface reformation of indium-tin-oxide(ITO) substrate. An ITO is widely used as a transparent electrode in light-emitting diodes, and the OLEDs device performance is sensitive to the surface properties of the ITO. The ITO surface reformation could reduce the Schottky barrier at the ITO/organic interface and increase the adhesion of the organic layer onto the electrode. We have studied the characteristics of OLEDs with a treatment by a wet processing of the ITO substrate. The self-assembled monolayer(SAM) was used for wet processing. The characteristics of OLEDs were improved by SAM treatment of an ITO in this work. The OLEDs with a structure of ITO/TPD(50nm)/$Alq_3$(70nm)/LiF(0.5nm)/Al(100nm) were fabricated, and the surface properties of ITO were investigated by using seneral characterization techniques. Self-assembled monolayer introduced at the anode/organic interface gave an improvement in turn-on voltage, luminance and external quantum efficiency compared to the device without the SAM layer. SAM-treatment time of the ITO substrate was made to be 0/10/15/20/25min. The current efficiency of the device with 15min. treated SAM layer was increased by 3 times and the external quantum efficiency by 2.6 times.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.411-412
• /
• 2008

We have studied a property change of organic light-emitting diodes (OLED) due to an indium tin oxide (ITO) surface reformation. The characteristics of OLED were improved by oxygen plasma processing of an ITO in this work. ITO is widely used as a transparent electrode in light-emitting devices, and the OLED device performance is sensitive to the surface properties of the ITO. The OLED devices with the structure of ITO/TPD(50nm)/$Alq_3$(70nm)/LiF(0.5nm)/Al(100nm) were fabricated, and the surface properties of ITO were investigated by using various characterization techniques. The oxygen plasma process of an ITO was processed by using RF power of 125W and oxygen partial pressure of $2\times10^{-2}$ Torr. The oxygen plasma processing of an ITO processed for 0/1/2/3/4min. Current-voltage-luminance characteristics of the devices show that turn-on voltage is 4V for 2min device and the luminance reaches about 27,000cd/$m^2$ for 4min device. The current efficiency shows that 3min device becomes saturated to be about 8cd/ A. They show that emission was from the $Alq_3$ layer, because the peak wavelength is about 525nm. View angle-dependent emission spectra show that the emission intensity decreases as the angle increases.

• 대한치과보철학회지
• /
• 제44권1호
• /
• pp.10-19
• /
• 2006

Statement of problem : The various kinds of properties of post and core may affect the stress distribution to the root of endodontically treated teeth Purpose: To evaluate the influence of various kinds of properties of post and core to the stress distribution to the root of endodontically treated teeth. Material and methods: Mandibular first premolar, prepared by general shape of post and core with gold crown, was used to two dimensional axisymmetric modeling for finite element analysis. Then property values of 8 different kinds of post and core was substituted for each. Finally, stress distribution shown areas around the root of post and core was analysed after applying 50N of vortical and oblique load. Results: 1. Stress value of oblique load was much higher than the maximum stress value of vertical load. 2. Under oblique load, very concentrated stress was located on post periapical area and variations in stress were very severe. Contrary to this, stress distribution was relatively uniform in vertical load. 3. Post materials with higher elastic modulus showed relatively more apically focused stress, and post materials with lower elastic modulus showed stress focused on cervical area on the axial wall of post. 4. Stress change according to the properties of core was shown only in the cervical area of post and below core as the higher elastic modulus, then increased in stress. 5. Post and core with medium value of elastic modulus showed relatively uniform stress distribution. Conclusions: Post materials with higher elastic modulus showed relatively more apically focused stress, and post materials with lower elastic modulus showed stress focused on cervical area on the axial wall of post. Stress change according to the properties of core was shown only in the cervical area of post and below core.